EXPULSION FUSE LINKS FOR USE IN HIGH VOLTAGE DISTRIBUTION CUT-OUTS
NH FUSE SYSTEM
LOW VOLTAGE FUSE LINKS
CIRCUIT PROTECTION SOLUTIONS
Bussmann Expulsion fuse links have been widely used throughout the world for over 40 years.
They have in that time built up a formidable reputation and consistency of performance.
Bussmann Expulsion fuse links are designed to be interchangeable with other types of manufacturer and
are available in several patterns.
•
Wide range of options available from 15kV to 72kV in ANSI T &K characteristics
•
Extra rapid option also available
EXPULSION FUSE LINKS FOR USE IN HIGH VOLTAGE DISTRIBUTION CUT-OUTS
Bussmann are one of the world’s leading
suppliers of fuses and fusible protection
systems. Provider of the world’s first truly
global product line, each product is backed
by an efficient world-wide distribution
network service and unrivalled technical
support. Bussmann circuit protection
solutions comply with major international
standards: BS, IEC, DIN and UL.
A comprehensive range of circuit
protection solutions fused and non-fused.
NH FUSE SYSTEM
LOW VOLTAGE FUSE LINKS
HIGH SPEED FUSES
LOW VOLTAGE FUSEGEAR
OPTIONS
PATTERN
B
PATTERN
U
PATTERN
D
A fixed NEMA button head link.
A universal link, with double tail and slip-off NEMA button head.
Double tailed link without NEMA button Head.
PATTERN
BR
As pattern B but the button head is attached via a 1/4 UNF thread to allow use of an extension rod.
Bussmann India
2nd Floor, Unit # 5
SF-5 White House
23-29 St Marks Road
Bangalore 560001
India
Tel: +91 80 227 0893
Fax: +91 80 224 0124
Email: bussmann@blr.vsnl.net.in
Bussmann Asia Pacific
1 Jalan Kilang Timor
#06-01 Pacific Tech Centre
Singapore 159303
Republic of Singapore
Tel: +65 278 6151
Fax: +65 278 3151
Email: bussmann@bussasiapac.com.sg
Bussmann Middle East
P.O. Box 30861
Dubail
United Arab Emirates
EXPULSION LINKS ARE AVAILABLE WITH THREE DIFFERENT TIME-CURRENT CHARACTERISTICS
TYPE
T
TYPE
K
TYPE
XA
Complies with ANSI C 37-42 requirements for slow-blowing T characteristics.
Complies with ANSI requirements for fast blowing K characteristics.
This type of Expulsion Link has an extra rapid characteristic. It is suitable for applications
where a high degree of system protection is required at the expense of discrimination.
HIGH SPEED FUSES
LOW VOLTAGE FUSEGEAR
HIGH SPEED FUSES
FOR OVERHEAD LINE PROTECTION
The fuse link assembly for a given range is standard for all rated voltages. The exception isthat the tail
Length is varied to suit the dimensions of expulsion fuses of different ratings.
ORDERING CODE REFERENCES
When ordering quote the following requirements:
Example
A
Voltage rating in kV – 15, 46 or 72
B
Type of time current characteristics – T, K or XA
C
Type of termination – B, U, D or BR
D
Current rating
Example
15
K
B
30 amps
Tel: +971 (04) 3240702
Fax: +971 (04) 3240804
Email: bussmann@emirates.net.ae
Cooper Bussmann
Cooper (UK) Limited
Burton-on-the-Wolds
Leicestershire · LE12 5TH UK
Telephone: 44 (0)1509 882 737
Facsimile : 44 (0)1509 882 786
http://www.bussmann.com
HV DIN PRODUCTS
ASL
Your Representative
Thus a typical ordering reference for a 15kV NEMA type K, button head 30A fuse link would be:
15KB30 Expulsion Link
SOLID LINKS
Solid links rated at 100A are also available in both button head and universal versions for fitting into expulsion
fuse carriers where required. These can be ordered in a similar way using the abbreviation ‘S’, e.g.
15SB
etc.
EL- 2001
A
Industries Company.
EXPULSION FUSE LINKS FOR USE IN HIGH VOLTAGE DISTRIBUTION CUT-OUTS
EXPULSION FUSE LINKS FOR USE IN HIGH VOLTAGE DISTRIBUTION CUT-OUTS
EXPULSION FUSE LINKS FOR USE IN HIGH VOLTAGE DISTRIBUTION CUT-OUTS
PACKAGING
Expulsion links are packed in quantities of 25 (maximum) to the carton, up to and including 50A. From 60A
to 100A, are packed in quantities of 10. Where specially requested they can be individually packed. To avoid
incorrect replacement the links have colour coded labels.
KEY:
Pink Label:
TYPE ‘XA’
Yellow Label:
TYPE ‘K’
Green Label:
TYPE ‘T’
Product Profile
TIME CURRENT CHARACTERISTICS FOR TYPE ‘T’ EXPULSION LINKS
CURVES RELATE TO MINIMUM MELTING TIMES WITH VARIATIONS BEING PLUS ON CURRENT
TIME CURRENT CHARACTERISTICS FOR TYPE ‘K’ EXPULSION LINKS
CURVES RELATE TO MINIMUM MELTING TIMES WITH VARIATIONS BEING PLUS ON CURRENT
APPLICATION NOTES
1
Expulsion fuse link’s current ratings should be selected on the basis of maximum expected transient
no-damage currents rather than on full-load current. In addition, the selection of higher current
ratings will reduce the possibility of supply interruption due to transient surges such as those due to
lightning strikes.
Links should be handled with a reasonable degree of care when installing. Excessively rough
handling may damage the element.
It is normal, under certain fault conditions, for arc extinguishing material and/or metal particles to be
expelled from the fuse assembly. It is therefore recommended that reasonable precautions be taken
to prevent the installation being approached by unauthorised persons.
TABLE OF CURRENT RATINGS (AMPERES)
2
3
TIME IN SECONDS
TYPE T
TYPE K
TYPE XA
1 2 3 5 6 7.5 8 10 12 15 20 25 30 40 50 60 65 75 80 100
1 2 3 5 6 7.5 8 10 12 15 20 25 30 40 50 60 65 75 80 100
1 2 3 5 6 7.5 8 10 12 15 20 25 30 40 50 60 65 75 80 100
TABLE OF LENGHTS MM 1-50 AMP // 60-100 AMP ILLUSTRATED BELOW
1-50 Amp
A
125
60 -100 Amp
A
125
Ø10
DOUBLETAIL
11
DOUBLETAIL
UNIVERSAL
Ø19
UNIVERSAL
BUTTONHEAD
Ø19
Ø19
BUTTONHEAD
Ø
7.5
REMOVABLE BUTTONHEAD
Ø10.5
REMOVABLE BUTTONHEAD
ADUSTABLE BUTTON FOR 65 -100 AMP ASSEMBLY ONLY
TYPE kV
15kV
25kV
46kV
72kV
533
660
787
A
(21”)
(26”)
(31”)
Notes:
Type BR is similar to button head shown, except that the
button head is attached via a 6.3mm UNF thread.
For dimensional details of 50-100 Amp expulsion links,
please consult Bussmann application engineers.
1016 (40”)
CURRENT IN AMPERES
TIME IN SECONDS
CURRENT IN AMPERES
For more information visit our website at www.bussmann.com
2
For more information visit our website at www.bussmann.com
3
For more information visit our website at www.bussmann.com
4
综合技术交流
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
