LITE-ON TECHNOLOGY CORPORATION
Samli20120417
Property of Lite-On Only
Features
* Meet ROHS, Green Product.
* Side Looking Chip LED With Tin Plating.
* Ultra Bright AlInGaP Chip LED.
* Package In 8mm Tape On 7" Diameter Reels.
* EIA STD package.
* I.C. compatible.
* Compatible With Automatic Placement Equipment.
* Compatible With Infrared Reflow Solder Process.
Package
Dimensions
Part No.
LTST-S320KGKT
Notes:
1. All dimensions are in millimeters (inches).
Lens
Water Clear
Source Color
AlInGaP Green
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
Part
No. : LTST-S320KGKT
Page :
1
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Samli20120417
Property of Lite-On Only
Absolute
Maximum
Ratings
At
Ta=25
℃
LTST-S320KGKT
Parameter
Unit
Power Dissipation
75
mW
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
80
mA
DC Forward Current
30
mA
Reverse Voltage
5
V
Operating Temperature Range
-30°C to + 85°C
Storage Temperature Range
-40°C to + 85°C
Infrared Soldering Condition
260°C For 10 Seconds
Part
No. : LTST-S320KGKT
Page :
2
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Samli20120417
Property of Lite-On Only
Suggestion Profile:
Suggestion IR Reflow Profile For Pb Free Process
Part
No. : LTST-S320KGKT
Page :
3
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Samli20120417
Property of Lite-On Only
Electrical
Optical
Characteristics
At
Ta=25
℃
Parameter
Symbol
Part No.
LTST-
Min.
Typ.
Max.
Unit
Test Condition
Luminous Intensity
IV
S320KGKT-SR
18.0
35.0
mcd
IF = 20mA
Note 1
Viewing Angle
2θ1/2
S320KGKT-SR
130
deg
Note 2 (Fig.6)
Peak Emission Wavelength
λP
S320KGKT-SR
574
nm
Measurement
@Peak (Fig.1)
Dominant Wavelength
λd
S320KGKT-SR
571
nm
Note 3
Spectral Line Half-Width
Δλ
S320KGKT-SR
15
nm
Forward Voltage
VF
S320KGKT-SR
2.0
2.4
V
IF = 20mA
Reverse Current
IR
S320KGKT-SR
10
μA
VR = 5V
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2.
θ1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength,
λd
is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
Part
No. : LTST-S320KGKT
Page :
4
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Samli20120417
Property of Lite-On Only
Bin Code List
Forward Voltage
Bin Code
4
5
6
7
8
Min.
1.90
2.00
2.10
2.20
2.30
Unit: V @20mA
Max.
2.00
2.10
2.20
2.30
2.40
Tolerance on each Forward Voltage bin is +/-0.1 volt
Luminous Intensity
Bin Code
M
N
P
Min.
18.0
28.0
45.0
Tolerance on each Intensity bin is +/-15%
Dominant Wavelength
Bin Code
C
D
E
Min.
567.5
570.5
573.5
Unit : nm @20mA
Max.
570.5
573.5
576.5
Unit : mcd @20mA
Max.
28.0
45.0
71.0
Tolerance for each Dominate Wavelength bin is +/- 1nm
Part
No. : LTST-S320KGKT
Page :
5
of
12
BNS-OD-C131/A4
综合技术交流
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
