Loose
HIGH PERFORMANCES
MEtAllIzEd POlyPROPylENE FIlM CAPACItOR
d.C. ANd PUlSE APPlICAtIONS
typical applications:
deflection circuits in TV-sets and
monitors (S-correction), resonant capacitor in electronic
ballast and compact lamp, power factor correction and
coupling capacitor in SMPS, timing and oscillator circuits.
PRODUCT CODE:
R75 (digit 12: 0 to 9)
Pitch
(mm)
7.5
10.0
15.0
15.0
22.5
27.5
37.5
Box thickness
(mm)
All
All
<7.5
≥7.5
All
All
All
Maximum dimensions (mm)
B max
H max
L max
B +0.1
B +0.2
B +0.2
B +0.2
B +0.2
B +0.2
B +0.3
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
L +0.2
L +0.2
L +0.3
L +0.5
L +0.3
L +0.3
L +0.3
MKP Series
R75
Fig. 1
Taped
Fig. 2
Fig. 3
Ød±0.05
p=7.5
0.5
p=10
0.6
15≤p≤27.5
0.8
p = 37.5
1.0
All dimensions are in mm.
PROdUCt COdE SyStEM
The part number, comprising 14 digits, is formed as follows:
1
2
3
4
5
6
7
8
9
10 11
12
13
14
R
7 5
Digit 1 to 3
Digit 4
-
Series code.
d.c. rated voltage:
G = 160V
I = 250V
M= 400V
P = 630V
Q = 1000V
R= 1250V
T = 1600V U =2000V
Digit 5
Pitch:
D = 7.5 mm; F = 10.0mm; I = 15.0mm;
N = 22.5 mm; R = 27.5mm; W = 37.5mm
Digit 6 to 9
Digits 7 - 8 - 9 indicate the first three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12
Identifies the dimensions and electrical
characteristics (0 to 9).
Digit 13
Internal use.
Digit 14
Capacitance tolerance:
J=5%; K=10%; M=20%
GENERAl tECHNICAl dAtA
dielectric:
polypropylene film.
Plates:
aluminium layer deposited by evaporation under
vacuum.
Winding:
non-inductive type.
leads:
f
or Ø ≥ 0,6mm : tinned wire
Protection:
plastic case, thermosetting resin filled.
Box material is solvent resistant and flame
retardant according to UL94 V0.
Marking:
manufacturer’s logo, series (R75), dielectric
code (MKP), capacitance, tolerance, D.C. rated
voltage, manufacturing date code.
Climatic category:
55/105/56 IEC 60068-1
Operating temperature range:
-55 to +105°C
Related documents:
IEC 60384-16
for Ø = 0,5mm : tinned wire, low thermical conductivity
Table 1 (for more detailed information, please refer to pages 14).
Standard
packaging style
AMMO-PACK
AMMO-PACK
AMMO-PACK
REEL
Ø
355mm
REEL
Ø
355mm
REEL
Ø
500mm
REEL
Ø
500mm
Loose, short leads
Loose, long leads
(p<10mm)
Loose, long leads
(p10mm)
Loose, long leads
(p≥15mm)
lead length
(mm)
P
2
(mm)
06.35
12.70
19.05
06.35
12.70
12.70
19.05
taping style
Fig.
(No.)
1
2
3
1
2
2
3
Pitch
(mm)
7.5
10.0/15.0
22.5
7.5
10.0/15.0
10.0/15.0
22.5/27.5
Ordering code
(Digit 10 to 11)
DQ
DQ
DQ
CK
GY
CK
CK
AA
Z3
JM
40
50
04
+2
17
+1/-2
18
+1/-1
30
+5
25
+2/-1
Note: Ammo-pack is the preferred packaging for taped version.
105
09/2008
HIGH PERFORMANCES
MEtAllIzEd POlyPROPylENE FIlM CAPACItOR
d.C. ANd PUlSE APPlICAtIONS
PRODUCT CODE:
R75 (digit 12: 0 to 9)
MKP Series
R75
Rated
Cap.
0.10
0.12
0.15
0.18
0.22
0.12
0.15
0.18
0.22
0.27
0.33
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
160Vdc / 70Vac
Reduced sizes
B
4.0
5.0
5.0
6.0
6.0
4.0
4.0
5.0
5.0
6.0
6.0
H
9.0
10.5
10.5
12.0
12.0
9.0
9.0
11.0
11.0
12.0
12.0
l
10.0
10.0
10.0
10.5
10.5
13.0
13.0
13.0
13.0
13.0
13.0
p
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.0
10.0
Max
dv/dt
(V/µs)
100
100
100
100
100
90
90
90
90
90
90
Max K
0
(V
2
/µs)
32 E3
32 E3
32 E3
32 E3
32 E3
28 E3
28 E3
28 E3
28 E3
28 E3
28 E3
Part Number
R75GD
R75GD
R75GD
R75GD
R75GD
R75GF
R75GF
R75GF
R75GF
R75GF
R75GF
3100--B--
3120--B--
3150--B--
3180--A--
3220--A--
3120--A--
3150--A--
3180--A--
3220--A--
3270--A--
3330--A--
single sided metallized
polypropylene film
1 section
(160Vdc)
The derating curves of previous table are not included this
catalogue, available upon request.
Rated
Cap.
0.068
0.082
0.10
0.12
0.15
0.18
0.082
0.10
0.12
0.15
0.18
0.22
0.18
0.22
0.27
0.33
0.39
0.47
0.47
0.56
0.56
0.68
0.68
0.82
1.0
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
160Vdc / 90Vac
Std dimensions
B
4.0
4.0
5.0
5.0
6.0
6.0
4.0
4.0
5.0
5.0
6.0
6.0
5.0
5.0
6.0
6.0
7.5
7.5
9.0
8.5
9.0
8.5
13.0
10.0
10.0
H
9.0
9.0
10.5
10.5
12.0
12.0
9.0
9.0
11.0
11.0
12.0
12.0
11.0
11.0
12.0
12.0
13.5
13.5
12.5
14.5
12.5
14.5
12.0
16.0
16.0
L
10.0
10.0
10.0
10.0
10.5
10.5
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
p
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
Max
dv/dt
(V/µs)
300
300
300
300
300
300
180
180
180
180
180
180
100
100
100
100
100
100
100
100
100
100
100
100
100
Max K
0
(V
2
µs)
74 E3
74 E3
74 E3
74 E3
74 E3
74 E3
58 E3
58 E3
58 E3
58 E3
58 E3
58 E3
32 E3
32 E3
32 E3
32 E3
32 E3
32 E3
32 E3
32 E3
32 E3
32 E3
32 E3
32 E3
32 E3
Part Number
R75GD2680--4--
R75GD2820--4--
R75GD3100--4--
R75GD3120--4--
R75GD3150--0--
R75GD3180--3--
R75GF 2820--0--
R75GF 3100--3--
R75GF 3120--0--
R75GF 3150--0--
R75GF 3180--0--
R75GF 3220--3--
R75GI 3180--0--
R75GI 3220--0--
R75GI 3270--0--
R75GI 3330--0--
R75GI 3390--0--
R75GI 3470--0--
R75GI 3470--6--
R75GI 3560--0--
R75GI 3560--6--
R75GI 3680--0--
R75GI 3680--6--
R75GI 3820--0--
R75GI 4100--0--
Rated
Cap.
0.82
1.0
1.2
1.5
1.8
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
33.0
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
160Vdc / 90Vac
Std dimensions
B
7.0
7.0
8.5
10.0
10.0
9.0
9.0
11.0
11.0
13.0
13.0
13.0
14.0
18.0
18.0
22.0
22.0
11.0
11.0
11.0
13.0
16.0
16.0
19.0
19.0
20.0
20.0
24.0
30.0
30.0
H
16.0
16.0
17.0
18.5
18.5
17.0
17.0
20.0
20.0
22.0
22.0
25.0
28.0
33.0
33.0
37.0
37.0
22.0
22.0
22.0
24.0
28.5
28.5
32.0
32.0
40.0
40.0
44.0
45.0
45.0
L
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
p
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Max
dv/dt
(V/µs)
60
60
60
60
60
50
50
50
50
50
50
50
50
50
50
50
50
35
35
35
35
35
35
35
35
35
35
35
35
35
Max K
0
(V
2
/µs)
19 E3
19 E3
19 E3
19 E3
19 E3
16 E3
16 E3
16 E6
16 E3
16 E3
16 E3
16 E3
16 E3
16 E3
16 E3
16 E3
16 E3
11 E3
11 E3
11 E3
11 E3
11 E3
11 E3
11 E3
11 E3
11 E3
11 E3
11 E3
11 E3
11 E3
Part Number
R75GN 3820--0--
R75GN 4100--0--
R75GN 4120--0--
R75GN 4150--0--
R75GN 4180--0--
R75GR 4150--0--
R75GR 4180--0--
R75GR 4220--3--
R75GR 4270--0--
R75GR 4330--0--
R75GR 4390--0--
R75GR 4470--3--
R75GR 4560--0--
R75GR 4680--0--
R75GR 4820--0--
R75GR 5100--0--
R75GR 5120--0--
R75GW 4330--0--
R75GW 4390--0--
R75GW 4470--0--
R75GW 4560--0--
R75GW 4680--0--
R75GW 4820--0--
R75GW 5100--0--
R75GW 5120--0--
R75GW 5150--0--
R75GW 5180--0--
R75GW 5220--0--
R75GW 5270--0--
R75GW 5330--0--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are mm.
Note: If the working voltage (V) is lower than the rated voltage (V
R
), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V
R
/V.
The pulse characteristic K
0
depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the above values.
09/2008
106
HIGH PERFORMANCES
MEtAllIzEd POlyPROPylENE FIlM CAPACItOR
d.C. ANd PUlSE APPlICAtIONS
PRODUCT CODE:
R75 (digit 12: 0 to 9)
Rated
Cap.
0.068
0.082
0.10
0.12
0.15
0.18
0.082
0.10
0.12
0.15
0.18
0.22
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
250Vdc / 140Vac
Reduced sizes
B
4.0
4.0
5.0
5.0
6.0
6.0
4.0
4.0
5.0
5.0
6.0
6.0
H
9.0
9.0
10.5
10.5
12.0
12.0
9.0
9.0
11.0
11.0
12.0
12.0
l
10.0
10.0
10.0
10.0
10.5
10.5
13.0
13.0
13.0
13.0
13.0
13.0
p
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.0
10.0
Max
dv/dt
(V/µs)
180
180
180
180
180
180
150
150
150
150
150
150
Max K
0
(V
2
/µs)
90 E3
90 E3
90 E3
90 E3
90 E3
90 E3
75 E3
75 E3
75 E3
75 E3
75 E3
75 E3
Part Number
R75ID
R75ID
R75ID
R75ID
R75ID
R75ID
R75IF
R75IF
R75IF
R75IF
R75IF
R75IF
2680--B--
2820--B--
3100--B--
3120--B--
3150--A--
3180--A--
2820--A--
3100--A--
3120--A--
3150--A--
3180--A--
3220--A--
MKP Series
R75
single sided metallized
polypropylene film
1 section
(250Vdc)
The derating curves of previous table are not included this
catalogue, available upon request.
Rated
Cap.
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.39
0.47
0.47
0.56
0.56
0.68
0.68
0.82
0.82
1.0
1.2
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
250Vdc / 160Vac
Std dimensions
B
4.0
4.0
4.0
4.0
4.0
5.0
5.0
6.0
6.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
6.0
6.0
5.0
5.0
5.0
5.0
6.0
6.0
7.5
9.0
7.5
9.0
7.5
9.0
8.5
13.0
10.0
13.0
10.0
11.0
H
9.0
9.0
9.0
9.0
9.0
10.5
10.5
12.0
12.0
9.0
9.0
9.0
9.0
9.0
11.0
11.0
12.0
12.0
11.0
11.0
11.0
11.0
12.0
12.0
13.5
12.5
13.5
12.5
13.5
12.5
14.5
12.0
16.0
12.0
16.0
19.0
L
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.5
10.5
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
p
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
Max
dv/dt
(V/µs)
650
650
650
650
650
650
650
650
650
550
550
550
550
550
550
550
550
550
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
Max K
0
(V
2
/µs)
150 E3
150 E3
150 E3
150 E3
150 E3
150 E3
150 E3
150 E3
150 E3
140 E3
140 E3
140 E3
140 E3
140 E3
140 E3
140 E3
140 E3
140 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
100 E3
Part Number
R75ID 2270--4--
R75ID 2330--4--
R75ID 2390--4--
R75ID 2470--4--
R75ID 2560--4--
R75ID 2680--4--
R75ID 2820--4--
R75ID 3100--3--
R75ID 3120--3--
R75IF 2330--0--
R75IF 2390--0--
R75IF 2470--3--
R75IF 2560--3--
R75IF 2680--3--
R75IF 2820--3--
R75IF 3100--3--
R75IF 3120--3--
R75IF 3150--3--
R75II 3120--3--
R75II 3150--3--
R75II 3180--4--
R75II 3220--4--
R75II 3270--4--
R75II 3330--4--
R75II 3390--4--
R75II 3390--7--
R75II 3470--4--
R75II 3470--8--
R75II 3560--4--
R75II 3560--8--
R75II 3680--4--
R75II 3680--8--
R75II 3820--4--
R75II 3820--8--
R75II 4100--4--
R75II 4120--4--
Rated
Cap.
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
33.0
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
250Vdc / 160Vac
Std dimensions
B
6.0
6.0
6.0
6.0
7.0
7.0
8.5
10.0
10.0
11.0
13.0
13.0
9.0
9.0
9.0
9.0
11.0
11.0
13.0
13.0
13.0
14.0
18.0
18.0
22.0
22.0
11.0
11.0
11.0
13.0
16.0
16.0
19.0
19.0
20.0
20.0
24.0
24.0
30.0
H
15.0
15.0
15.0
15.0
16.0
16.0
17.0
18.5
18.5
20.0
22.0
22.0
17.0
17.0
17.0
17.0
20.0
20.0
22.0
22.0
25.0
28.0
33.0
33.0
37.0
37.0
22.0
22.0
22.0
24.0
28.5
28.5
32.0
32.0
40.0
40.0
44.0
44.0
45.0
L
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
p
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
Max
dv/dt
(V/µs)
125
125
125
125
125
125
125
125
125
125
125
125
100
100
100
100
100
100
100
100
100
100
100
100
100
100
40
40
40
40
40
40
40
40
40
40
40
40
40
Max K
0
(V
2
/µs)
63 E3
63 E3
63 E3
63 E3
63 E3
63 E3
63 E3
63 E3
63 E3
63 E3
63 E3
63 E3
50 E3
50 E3
50 E3
50 E3
50 E3
50 E3
50 E3
50 E3
50 E3
50 E3
50 E3
50 E3
50 E3
50 E3
20 E3
20 E3
20 E3
20 E3
20 E3
20 E3
20 E3
20 E3
20 E3
20 E3
20 E3
20 E3
20 E3
Part Number
R75IN 3390--3--
R75IN 3470--3--
R75IN 3560--4--
R75IN 3680--4--
R75IN 3820--4--
R75IN 4100--4--
R75IN 4120--4--
R75IN 4150--4--
R75IN 4180--4--
R75IN 4220--4--
R75IN 4270--4--
R75IN 4330--4--
R75IR 4100--3--
R75IR 4120--3--
R75IR 4150--4--
R75IR 4180--4--
R75IR 4220--5--
R75IR 4270--4--
R75IR 4330--4--
R75IR 4390--4--
R75IR 4470--5--
R75IR 4560--4--
R75IR 4680--4--
R75IR 4820--4--
R75IR 5100--4--
R75IR 5120--4--
R75IW4330--4--
R75IW4390--4--
R75IW4470--4--
R75IW4560--4--
R75IW4680--4--
R75IW4820--4--
R75IW5100--4--
R75IW5120--4--
R75IW5150--4--
R75IW5180--4--
R75IW5220--4--
R75IW5270--4--
R75IW5330--4--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are mm.
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Note: If the working voltage (V) is lower than the rated voltage (V
R
), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V
R
/V.
The pulse characteristic K
0
depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the above values.
107
09/2008
HIGH PERFORMANCES
MEtAllIzEd POlyPROPylENE FIlM CAPACItOR
d.C. ANd PUlSE APPlICAtIONS
PRODUCT CODE:
R75 (digit 12: 0 to 9)
MKP Series
R75
Rated
Cap.
0.027
0.033
0.039
0.047
0.056
0.068
µF
µF
µF
µF
µF
µF
400Vdc / 200Vac
Reduced sizes
B
4.0
5.0
5.0
5.0
6.0
6.0
H
9.0
10.5
10.5
10.5
12.0
12.0
L
10.0
10.0
10.0
10.0
10.5
10.5
p
7.5
7.5
7.5
7.5
7.5
7.5
Max
dv/dt
(V/µs)
390
390
390
390
390
390
Max K
0
(V /µs)
312 E3
312 E3
312 E3
312 E3
312 E3
312 E3
2
Part Number
R75MD 2270--B--
R75MD 2330--B--
R75MD 2390--B--
R75MD 2470--B--
R75MD 2560--A--
R75MD 2680--A--
single sided metallized
polypropylene film
1 section
(400Vdc)
The derating curves of previous table are not included this
catalogue, available upon request.
Rated
Cap.
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.22
0.27
0.27
0.33
0.33
0.39
0.47
0.56
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
400Vdc / 220Vac*
Std dimensions
B
4.0
4.0
4.0
4.0
4.0
5.0
5.0
6.0
6.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
6.0
6.0
5.0
5.0
5.0
6.0
6.0
7.5
7.5
9.0
8.5
9.0
10.0
13.0
10.0
10.0
11.0
H
9.0
9.0
9.0
9.0
9.0
10.5
10.5
12.0
12.0
9.0
9.0
9.0
9.0
11.0
11.0
11.0
12.0
12.0
11.0
11.0
11.0
12.0
12.0
13.5
13.5
12.5
14.5
12.5
16.0
12.0
16.0
16.0
19.0
L
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.5
10.5
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
p
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
Max
dv/dt
(V/µs)
1500
1500
1500
1500
1500
1500
1500
1500
1500
1300
1300
1300
1300
1300
1300
1300
1300
1300
900
900
900
900
900
900
900
900
900
900
900
900
900
900
900
Max K
0
(V
2
/µs)
360 E3
360 E3
360 E3
360 E3
360 E3
360 E3
360 E3
360 E3
360 E3
336 E3
336 E3
336 E3
336 E3
336 E3
336 E3
336 E3
336 E3
336 E3
240 E3
240 E3
240 E3
240 E3
240 E3
240 E3
240 E3
240 E3
240 E3
240 E3
240 E3
240 E3
240 E3
240 E3
240 E3
Part Number
R75MD 2100--4--
R75MD 2120--4--
R75MD 2150--4--
R75MD 2180--4--
R75MD 2220--4--
R75MD 2270--4--
R75MD 2330--4--
R75MD 2390--3--
R75MD 2470--3--
R75ΜF 2150--0--
R75ΜF 2180--0--
R75ΜF 2220--3--
R75ΜF 2270--3--
R75ΜF 2330--3--
R75ΜF 2390--3--
R75ΜF 2470--3--
R75ΜF 2560--3--
R75ΜF 2680--3--
R75MI 2680--3--
R75MI 2820--3--
R75MI 3100--3--
R75MI 3120--3--
R75MI 3150--3--
R75MI 3180--3--
R75MI 3220--3--
R75MI 3220--7--
R75MI 3270--3--
R75MI 3270--7--
R75MI 3330--3--
R75MI 3330--7--
R75MI 3390--3--
R75MI 3470--3--
R75MI 3560--3--
Rated
Cap.
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
400Vdc / 220Vac*
Std dimensions
B
6.0
6.0
6.0
6.0
7.0
7.0
8.5
10.0
10.0
11.0
13.0
13.0
9.0
9.0
9.0
11.0
11.0
13.0
13.0
13.0
14.0
18.0
18.0
22.0
22.0
11.0
11.0
11.0
11.0
13.0
16.0
16.0
19.0
19.0
19.0
20.0
20.0
24.0
30.0
H
15.0
15.0
15.0
15.0
16.0
16.0
17.0
18.5
18.5
20.0
22.0
22.0
17.0
17.0
17.0
20.0
20.0
22.0
22.0
25.0
28.0
33.0
33.0
37.0
37.0
22.0
22.0
22.0
22.0
24.0
28.5
28.5
32.0
32.0
32.0
40.0
40.0
44.0
45.0
L
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
p
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
Max
dv/dt
(V/µs)
300
300
300
300
300
300
300
300
300
300
300
300
130
130
130
130
130
130
130
130
130
130
130
130
130
70
70
70
70
70
70
70
70
70
70
70
70
70
70
Max K
0
(V
2
/µs)
144 E3
144 E3
144 E3
144 E3
144 E3
144 E3
144 E3
144 E3
144 E3
144 E3
144 E3
144 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
56 E3
56 E3
56 E3
56 E3
56 E3
56 E3
56 E3
56 E3
56 E3
56 E3
56 E3
56 E3
56 E3
56 E3
Part Number
R75MN 3180--3--
R75MN 3220--3--
R75MN 3270--3--
R75MN 3330--3--
R75MN 3390--3--
R75MN 3470--3--
R75MN 3560--3--
R75MN 3680--3--
R75MN 3820--3--
R75MN 4100--3--
R75MN 4120--3--
R75MN 4150--3--
R75MR 3560--3--
R75MR 3680--3--
R75MR 3820--3--
R75MR 4100--4--
R75MR 4120--3--
R75MR 4150--3--
R75MR 4180--3--
R75MR 4220--4--
R75MR 4270--3--
R75MR 4330--3--
R75MR 4390--3--
R75MR 4470--3--
R75MR 4560--3--
R75MW 4120--3--
R75MW 4150--3--
R75MW 4180--3--
R75MW 4220--3--
R75MW 4270--3--
R75MW 4330--3--
R75MW 4390--3--
R75MW 4470--3--
R75MW 4560--3--
R75MW 4680--3--
R75MW 4820--3--
R75MW 5100--4--
R75MW 5120--3--
R75MW 5150--3--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are mm.
Note: If the working voltage (V) is lower than the rated voltage (V
R
), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V
R
/V.
The pulse characteristic K
0
depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the above values.
* Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 151)
09/2008
108
HIGH PERFORMANCES
MEtAllIzEd POlyPROPylENE FIlM CAPACItOR
d.C. ANd PUlSE APPlICAtIONS
PRODUCT CODE:
R75 (digit 12: 0 to 9)
MKP Series
R75
Rated
Cap.
0.010
0.012
0.015
0.018
0.022
0.027
µF
µF
µF
µF
µF
µF
630Vdc / 220Vac*
Reduced sizes
B
4.0
4.0
5.0
5.0
6.0
6.0
H
9.0
9.0
10.5
10.5
12.0
12.0
L
10.0
10.0
10.0
10.0
10.5
10.5
p
7.5
7.5
7.5
7.5
7.5
7.5
Max
dv/dt
(V/µs)
600
600
600
600
600
600
Max K
0
(V
2
/µs)
760 E3
760 E3
760 E3
760 E3
760 E3
760 E3
Part Number
R75PD2100
--
B
--
R75PD2120
--
B
--
R75PD2150
--
B
--
R75PD2180
--
B
--
R75PD2220
--
A
--
R75PD2270
--
A
--
single sided metallized
polypropylene film
1 section
(630Vdc)
The derating curves of previous table are not included this
catalogue, available upon request.
Rated
Cap.
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
0.010
0.012
0.015
0.018
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.10
0.12
0.12
0.15
0.15
0.18
0.18
0.22
0.27
0.33
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
µF
µF
µF
µF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
630Vdc / 250Vac*
Std dimensions
B
H
L
p
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
5.0 10.5 10.0 7.5
5.0 10.5 10.0 7.5
6.0 12.0 10.5 7.5
6.0 12.0 10.5 7.5
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
6.0 12.0 13.0 10.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
6.0 12.0 18.0 15.0
7.5 13.5 18.0 15.0
9.0 12.5 18.0 15.0
7.5 13.5 18.0 15.0
9.0 12.5 18.0 15.0
8.5 14.5 18.0 15.0
13.0 12.0 18.0 15.0
10.0 16.0 18.0 15.0
13.0 12.0 18.0 15.0
10.0 16.0 18.0 15.0
11.0 19.0 18.0 15.0
11.0 19.0 18.0 15.0
Max
dv/dt
(V/µs)
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
Max K
0
(V
2
/µs)
760 E3
760 E3
760 E3
760 E3
760 E3
760 E3
760 E3
760 E3
760 E3
760 E3
760 E3
760 E3
760 E3
760 E3
760 E3
760 E3
690 E3
690 E3
690 E3
690 E3
690 E3
690 E3
690 E3
690 E3
690 E3
690 E3
690 E3
690 E3
690 E3
690 E3
690 E3
690 E3
690 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
504 E3
Part Number
R75PD1100--4--
R75PD1120--4--
R75PD1150--4--
R75PD1180--4--
R75PD1220--4--
R75PD1270--4--
R75PD1330--4--
R75PD1390--4--
R75PD1470--4--
R75PD1560--4--
R75PD1680--4--
R75PD1820--4--
R75PD2100--4--
R75PD2120--4--
R75PD2150--3--
R75PD2180--3--
R75PF 1100--0--
R75PF 1120--0--
R75PF 1150--0--
R75PF 1180--0--
R75PF 1220--0--
R75PF 1270--0--
R75PF 1330--0--
R75PF 1390--0--
R75PF 1470--0--
R75PF 1560--0--
R75PF 1680--0--
R75PF 1820--0--
R75PF 2100--3--
R75PF 2120--3--
R75PF 2150--3--
R75PF 2180--3--
R75PF 2220--3--
R75PI 2270--0--
R75PI 2330--0--
R75PI 2390--3--
R75PI 2470--3--
R75PI 2560--3--
R75PI 2680--3--
R75PI 2820--3--
R75PI 3100--3--
R75PI 3100--7--
R75PI 3120--3--
R75PI 3120--7--
R75PI 3150--3--
R75PI 3150--7--
R75PI 3180--3--
R75PI 3180--7--
R75PI 3220--3--
R75PI 3270--3--
R75PI 3330--3--
Rated
Cap.
0.082
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
630Vdc / 250Vac*
Std dimensions
B
H
L
p
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
7.0 16.0 26.5 22.5
7.0 16.0 26.5 22.5
8.5 17.0 26.5 22.5
10.0 18.5 26.5 22.5
10.0 18.5 26.5 22.5
11.0 20.0 26.5 22.5
11.0 20.0 26.5 22.5
13.0 22.0 26.5 22.5
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
11.0 20.0 32.0 27.5
11.0 20.0 32.0 27.5
13.0 22.0 32.0 27.5
13.0 22.0 32.0 27.5
14.0 28.0 32.0 27.5
14.0 28.0 32.0 27.5
18.0 33.0 32.0 27.5
18.0 33.0 32.0 27.5
22.0 37.0 32.0 27.5
22.0 37.0 32.0 27.5
11.0 22.0 41.5 37.5
11.0 22.0 41.5 37.5
11.0 22.0 41.5 37.5
13.0 24.0 41.5 37.5
13.0 24.0 41.5 37.5
16.0 28.5 41.5 37.5
16.0 28.5 41.5 37.5
19.0 32.0 41.5 37.5
19.0 32.0 41.5 37.5
19.0 32.0 41.5 37.5
20.0 40.0 41.5 37.5
20.0 40.0 41.5 37.5
24.0 44.0 41.5 37.5
30.0 45.0 41.5 37.5
Max
dv/dt
(V/µs)
400
400
400
400
400
400
400
400
400
400
400
400
180
180
180
180
180
180
180
180
180
180
180
180
90
90
90
90
90
90
90
90
90
90
90
90
90
90
Max K
0
(V
2
/µs)
315 E3
315 E3
315 E3
315 E3
315 E3
315 E3
315 E3
315 E3
315 E3
315 E3
315 E3
315 E3
227 E3
227 E3
227 E3
227 E3
227 E3
227 E3
227 E3
227 E3
227 E3
227 E3
227 E3
227 E3
113 E3
113 E3
113 E3
113 E3
113 E3
113 E3
113 E3
113 E3
113 E3
113 E3
113 E3
113 E3
113 E3
113 E3
Part Number
R75PN 2820--3--
R75PN 3100--3--
R75PN 3120--3--
R75PN 3150--3--
R75PN 3180--3--
R75PN 3220--3--
R75PN 3270--3--
R75PN 3330--3--
R75PN 3390--3--
R75PN 3470--3--
R75PN 3560--3--
R75PN 3680--3--
R75PR 3390--3--
R75PR 3470--4--
R75PR 3560--3--
R75PR 3680--3--
R75PR 3820--3--
R75PR 4100--3--
R75PR 4120--4--
R75PR 4150--3--
R75PR 4180--3--
R75PR 4220--3--
R75PR 4270--3--
R75PR 4330--3--
R75PW 3680--3--
R75PW 3820--3--
R75PW 4100--3--
R75PW 4120--3--
R75PW 4150--3--
R75PW 4180--3--
R75PW 4220--3--
R75PW 4270--3--
R75PW 4330--3--
R75PW 4390--4--
R75PW 4470--3--
R75PW 4560--4--
R75PW 4680--3--
R75PW 4820--3--
All dimensions are mm.
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Note: If the working voltage (V) is lower than the rated
voltage (V
R
), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio V
R
/V.
The pulse characteristic K
0
depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table. The dv/dt test is carried
out at 2 times the above values.
* Not suitable for across-the-line applications. Please
refer to Interference Suppression Capacitors (page
151)
109
09/2008
求职招聘
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
