M39003/03
www.vishay.com
Vishay
Solid-Electrolyte T
ANTALEX
™ Capacitors,
Military MIL-PRF-39003/03 Qualified, Style CSR23
FEATURES
• Hermetically sealed
• Metal cased
• Axial lead
• Weibull failure rates B, C, D
• Exponential failure rates M, P, R, S
• Tape and reel available per EIA-296 standard
PERFORMANCE CHARACTERISTICS
Operating Temperature:
-55 °C to +125 °C
(above 85 °C, voltage derating is required)
Capacitance Range:
1.2 μF to 1000 μF
Capacitance Tolerance:
± 5 %, ± 10 %, ± 20 %
Voltage Rating:
6 V
DC
to 50 V
DC
STYLE, MILITARY SPECIFICATION SHEET
Style CSR23, M39003/03
MIL-PRF-39003/3
DESCRIPTION
Solid-electrolyte
T
ANTALEX
capacitors
to
military
specification MIL-PRF-39003 - Exponential and Weibull
Distribution: hermetically sealed, metal cased, axial leaded
tubular capacitors manufactured as military style CSR23.
These capacitors are furnished to the requirements of the
military specification, including marking, testing and
inspection.
In accordance with the specification, all capacitors are
marked with the military part number (M39003/xx-xxxx)
rather than the older style designation (CSRxxxxxxxx) and
should be ordered as such. All capacitors covered by
MIL-PRF-39003 are now ordered with the military part
number as illustrated in the Part Numbering System chart.
Capacitors must not be ordered using the style number
identification.
MIL-PRF-39003 establishes failure rates (expressed in
percent per 1000 h) based on exponential and Weibull
distribution. Care must be exercised in ordering to insure the
part number correctly identifies the desired failure rate level.
In addition, each order for military style CSR13, CSR21,
CSR23 capacitors requiring government inspection must
state whether inspection is to be at the destination or at the
Vishay plant. Orders requiring source inspection cannot be
shipped until this has been accomplished.
Style CS13 capacitors previously shown in MIL-C-26655 are
directly replaced by style CSR13 and style CSR23
capacitors are extended capacitance range versions of
military style CSR13.
For information on the performance characteristics of these
capacitors, please refer to the latest issue of the military
specification.
ORDERING INFORMATION
M39003
BASIC
DOCUMENT NUMBER
Indicates the Basic
Specification; in this
case MIL-PRF-39003
/03
SLASH SHEET
Indicates the
Specification Sheet
of the Basic Military
Specification
-2046
DASH NUMBER
Taken from Ratings
table of the
Specification Sheet
A
SURGE CURRENT
OPTION LETTER
Blank = standard
(no surge current)
A = +25 °C,
after Weibull
B = -55 °C and +85 °C,
after Weibull
C = -55 °C and +85 °C,
before Weibull
D = +25 °C, after Weibull,
high temperature solder
E = -55 °C and +85 °C,
after Weibull, high
temperature solder
F = -55 °C and +85 °C,
before Weibull, high
temperature solder
H = high temperature
solder only (no surge)
/TR
PACKAGING OPTION
(1)
Blank = bulk
/TR = tape and reel, full reel
/HR = tape and reel, half reel
/PR = tape and reel, partial reel
/RR = tape and reel,
option R, full reel
/WR = tape and reel,
option W, full reel
Note
(1)
See detailed packaging information following the Standard Ratings table
Revision: 15-Dec-2021
Document Number: 40157
1
For technical questions, contact:
tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
M39003/03
www.vishay.com
DIMENSIONS
in inches [millimeters]
J
1.500 ± 0.250
[38.10 ± 6.35]
D
Vishay
M
0.094 [2.4]
Max.
L
CASE CODE
A
B
C
D
L
± 0.031 [0.79]
0.286 [7.26]
0.474 [12.04]
0.686 [17.42]
0.786 [19.96]
D
+ 0.016 [0.41]
- 0.015 [0.38]
0.135 [3.43]
0.185 [4.70]
0.289 [7.34]
0.351 [8.92]
M
± 0.002 [0.05]
0.020 [0.51]
0.020 [0.51]
0.025 [0.64]
0.025 [0.64]
J
(MAX.)
0.422 [10.72]
0.610 [15.49]
0.822 [20.88]
0.922 [23.42]
Notes
• Capacitors of this series are supplied with shrink-fitted insulation sleeve. The insulation sleeve laps over the ends of the capacitor body,
extending by 0.015" [0.38 mm] minimum beyond each end. Dimensions L and D include insulation sleeve additives. Dimension J is always
larger than L and is not affected by insulation sleeve
• A minimum lead length of 1.0" [25.4 mm] for use with tape and reel automatic insertion equipment is available upon request
RATINGS AND CASE CODES
μF
1.2
1.5
1.8
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
6V
10 V
15 V
20 V
35 V
50 V
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
C
C
D
D
D
C
C
C
C
C
D
D
C
C
C
D
D
B
B
B
B
C
C
D
D
C
C
C
C
C
D
D
D
D
D
D
Revision: 15-Dec-2021
Document Number: 40157
2
For technical questions, contact:
tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
M39003/03
www.vishay.com
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PART NO. M39003/03-
FAILURE RATE LEVEL (%/1000 h)
M
1.0
P
0.1
R
S
0.01 0.001
B
0.1
C
D
0.01 0.001
MAX. DCL (μA) AT
+25 °C
+85 °C
+125 °C
MAX. DF (%) AT
-55 °C TO +125 °C
Vishay
6 V
DC
AT +85 °C, SURGE = 8 V; 4 V
DC
AT +125 °C
10
10
12
100
100
330
330
390
470
470
680
680
820
1000
1000
6.8
6.8
8.2
47
47
56
68
68
82
220
220
270
390
470
470
560
4.7
4.7
5.6
33
33
39
150
150
180
220
220
270
330
330
Revision: 15-Dec-2021
A
A
A
B
B
C
C
C
C
C
D
D
D
D
D
A
A
A
B
B
B
B
B
B
C
C
C
D
D
D
D
A
A
A
B
B
B
C
C
C
D
D
D
D
D
10
20
10
10
20
10
20
10
10
20
10
20
10
10
20
10
20
10
10
20
10
10
20
10
10
20
10
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
0101 0201 0301 0401 2001 3001 4001
0102 0202 0302 0402 2002 3002 4002
0103 0203 0303 0403 2003 3003 4003
0104 0204 0304 0404 2004 3004 4004
0105 0205 0305 0405 2005 3005 4005
0106 0206 0306 0406 2006 3006 4006
0107 0207 0307 0407 2007 3007 4007
0108 0208 0308 0408 2008 3008 4008
0109 0209 0309 0409 2009 3009 4009
0110 0210 0310 0410 2010 3010 4010
0111 0211 0311 0411 2011 3011 4011
0112 0212 0312 0412 2012 3012 4012
0113 0213 0313 0413 2013 3013 4013
0114 0214 0314 0414 2014 3014 4014
0115 0215 0315 0415 2015 3015 4015
0116 0216 0316 0416 2016 3016 4016
0117 0217 0317 0417 2017 3017 4017
0118 0218 0318 0418 2018 3018 4018
0119 0219 0319 0419 2019 3019 4019
0120 0220 0320 0420 2020 3020 4020
0121 0221 0321 0421 2021 3021 4021
0122 0222 0322 0422 2022 3022 4022
0123 0223 0323 0423 2023 3023 4023
0124 0224 0324 0424 2024 3024 4024
0125 0225 0325 0425 2025 3025 4025
0126 0226 0326 0426 2026 3026 4026
0127 0227 0327 0427 2027 3027 4027
0128 0228 0328 0428 2028 3028 4028
0129 0229 0329 0429 2029 3029 4029
0130 0230 0330 0430 2030 3030 4030
0131 0231 0331 0431 2031 3031 4031
0132 0232 0332 0432 2032 3032 4032
0133 0233 0333 0433 2033 3033 4033
0134 0234 0334 0434 2034 3034 4034
0135 0235 0335 0435 2035 3035 4035
0136 0236 0336 0436 2036 3036 4036
0137 0237 0337 0437 2037 3037 4037
0138 0238 0338 0438 2038 3038 4038
0139 0239 0339 0439 2039 3039 4039
0140 0240 0340 0440 2040 3040 4040
0141 0241 0341 0441 2041 3041 4041
0142 0242 0342 0442 2042 3042 4042
0143 0243 0343 0443 2043 3043 4043
0144 0244 0344 0444 2044 3044 4044
0145 0245 0345 0445 2045 3045 4045
0.90
0.90
1.0
6.0
6.0
15.0
15.0
15.0
15.0
15.0
20.0
20.0
20.0
30.0
30.0
1.0
1.0
1.2
5.0
5.0
6.0
7.0
7.0
8.0
15.0
15.0
15.0
20.0
20.0
20.0
30.0
1.0
1.0
1.3
6.0
6.0
6.0
15.0
15.0
15.0
20.0
20.0
20.0
20.0
20.0
9.0
9.0
10.0
60.0
60.0
150
150
150
150
150
200
200
200
300
300
10.0
10.0
12.0
50.0
50.0
60.0
70.0
70.0
80.0
150
150
150
200
200
200
300
10.0
10.0
13.0
60.0
60.0
60.0
150
150
150
200
200
200
200
200
11.0
11.0
12.5
75.0
75.0
188
188
188
188
188
250
250
250
375
375
12.5
12.5
15.0
63.0
63.0
75.0
88.0
88.0
100
188
188
188
250
250
250
375
12.5
12.5
16.5
75.0
75.0
75.0
188
188
188
250
250
250
250
250
6
6
6
8
8
8
8
10
10
10
10
10
10
10
10
6
6
6
6
6
6
6
6
6
8
8
8
10
10
10
10
4
4
4
6
6
6
8
8
8
8
8
8
8
8
10 V
DC
AT +85 °C, SURGE = 13 V; 7 V
DC
AT +125 °C
15 V
DC
AT +85 °C, SURGE = 20 V; 10 V
DC
AT +125 °C
Document Number: 40157
3
For technical questions, contact:
tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
M39003/03
www.vishay.com
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PART NO. M39003/03-
FAILURE RATE LEVEL (%/1000 h)
M
1.0
P
0.1
R
S
0.01 0.001
B
0.1
C
D
0.01 0.001
MAX. DCL (μA) AT
+25 °C
+85 °C
+125 °C
MAX. DF (%) AT
-55 °C TO +125 °C
Vishay
20 V
DC
AT +85 °C, SURGE = 26 V; 13 V
DC
AT +125 °C
2.7
3.3
3.3
3.9
18
22
22
27
56
68
68
82
100
100
120
150
150
180
1.8
8.2
10
10
33
33
39
47
47
56
68
68
1.2
1.5
1.5
5.6
6.8
6.8
22
22
27
33
33
39
A
A
A
A
B
B
B
B
C
C
C
C
C
C
C
D
D
D
A
B
B
B
C
C
C
C
C
D
D
D
A
A
A
B
B
B
C
C
C
D
D
D
10
10
20
10
10
10
20
10
10
10
20
10
10
20
10
10
20
10
10
10
10
20
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
20
10
10
20
10
0146 0246 0346 0446 2046 3046 4046
0147 0247 0347 0447 2047 3047 4047
0148 0248 0348 0448 2048 3048 4048
0149 0249 0349 0449 2049 3049 4049
0150 0250 0350 0450 2050 3050 4050
0151 0251 0351 0451 2051 3051 4051
0152 0252 0352 0452 2052 3052 4052
0153 0253 0353 0453 2053 3053 4053
0154 0254 0354 0454 2054 3054 4054
0155 0255 0355 0455 2055 3055 4055
0156 0256 0356 0456 2056 3056 4056
0157 0257 0357 0457 2057 3057 4057
0158 0258 0358 0458 2058 3058 4058
0159 0259 0359 0459 2059 3059 4059
0160 0260 0360 0460 2060 3060 4060
0161 0261 0361 0461 2061 3061 4061
0162 0262 0362 0462 2062 3062 4062
0163 0263 0363 0463 2063 3063 4063
0164 0264 0364 0464 2064 3064 4064
0165 0265 0365 0465 2065 3065 4065
0166 0266 0366 0466 2066 3066 4066
0167 0267 0367 0467 2067 3067 4067
0168 0268 0368 0468 2068 3068 4068
0169 0269 0369 0469 2069 3069 4069
0170 0270 0370 0470 2070 3070 4070
0171 0271 0371 0471 2071 3071 4071
0172 0272 0372 0472 2072 3072 4072
0173 0273 0373 0473 2073 3073 4073
0174 0274 0374 0474 2074 3074 4074
0175 0275 0375 0475 2075 3075 4075
0176 0276 0376 0476 2076 3076 4076
0177 0277 0377 0477 2077 3077 4077
0178 0278 0378 0478 2078 3078 4078
0179 0279 0379 0479 2079 3079 4079
0180 0280 0380 0480 2080 3080 4080
0181 0281 0381 0481 2081 3081 4081
0182 0282 0382 0482 2082 3082 4082
0183 0283 0383 0483 2083 3083 4083
0184 0284 0384 0484 2084 3084 4084
0185 0285 0385 0485 2085 3085 4085
0186 0286 0386 0486 2086 3086 4086
0187 0287 0387 0487 2087 3087 4087
0.80
1.0
1.0
1.2
4.0
4.0
4.0
5.0
9.0
10.0
10.0
10.0
15.0
15.0
15.0
20.0
20.0
20.0
1.0
3.5
4.0
4.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
0.9
1.2
1.2
4.5
4.5
4.5
10.0
10.0
10.0
10.0
10.0
10.0
8.0
10.0
10.0
12.0
40.0
40.0
40.0
50.0
90.0
100
100
100
150
150
150
200
200
200
10.0
35.0
40.0
40.0
100
100
100
100
100
150
150
150
9.0
12.0
12.0
45.0
45.0
45.0
100
100
100
100
100
100
10.0
12.5
12.5
15.0
50.0
50.0
50.0
63.0
110
125
125
125
188
188
188
250
250
250
12.5
44.0
50.0
50.0
125
125
125
125
125
188
188
188
11.0
15.0
15.0
56.0
56.0
56.0
125
125
125
125
125
125
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
8
8
8
4
6
6
6
6
6
6
6
6
6
6
6
4
4
4
4
6
6
6
6
6
6
6
6
35 V
DC
AT +85 °C, SURGE = 46 V; 23 V
DC
AT +125 °C
50 V
DC
AT +85 °C, SURGE = 65 V; 33 V
DC
AT +125 °C
Revision: 15-Dec-2021
Document Number: 40157
4
For technical questions, contact:
tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
M39003/03
www.vishay.com
STANDARD PACKAGING QUANTITY
QUANTITY (pcs/reel)
CASE CODE
A
B
C
D
FULL REEL
/TR; /RR; /WR
1000
1000
500
500
HALF REEL
/HR
500
500
250
250
PARTIAL REEL
/PR
100
100
100
100
BULK QUANTITY
PER TRAY
n/a
20
20
20
PER BOX
100
100
100
80
Vishay
INSIDE TAPE SPACING
PACKAGING OPTION
CASE CODE
A, B
/TR; /HR; /PR
C, D
A, B
/RR
C, D
A, B
/WR
C, D
TAPE SPACING
2.47 ± 0.02
[62.7 ± 0.51]
2.88 ± 0.02
[73.0 ± 0.51]
2.05 ± 0.02
[52.1 ± 0.51]
2.47 ± 0.02
[62.7 ± 0.51]
-
2.05 ± 0.02
[52.1 ± 0.51]
PRODUCT INFORMATION
Quick Reference Guide
Selector Guide
Parameter Comparison Guide
Mounting of Through-Hole Components
Frequently Asked Questions
Solid Tantalum Capacitors (With MnO
2
Electrolyte) Voltage Derating
www.vishay.com/doc?40037
www.vishay.com/doc?49054
www.vishay.com/doc?40033
www.vishay.com/doc?40108
www.vishay.com/doc?40110
www.vishay.com/doc?40246
Revision: 15-Dec-2021
Document Number: 40157
5
For technical questions, contact:
tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
NXP MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
