NISSEI-ARCOTRONICS
Bulk
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES
D.C. AND PULSE APPLICATIONS
Typical application:
deflection circuits in TV sets (S-
correction and fly-back tuning) and monitors, lamp
capacitor for Electronic Ballast and compact lamps,
SNUBBER and SCR commutating circuits, applications
with high voltage and high current.
SERIES CODE:
R76
Taped
Ød
±
0.05
p
≤
10
0.6
15
≤
p
≤
27.5
0.8
Fig. 2
12.70
p = 37.5
1.0
Fig. 3
19.05
Fig. 1
P
2
(mm)
6.35
All dimensions are in mm.
PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
GENERAL TECHNICAL DATA
R7 6
1.
2.
3.
4.
5.
6.
7.
[ ]
Series code
Capacitance value in pico farads. First 2
digits are significant and 3
rd
digit indicates
number of zeros.
Capacitance tolerance
H = 2.5%
J = 5%
K = 10%
D.C. voltage
Packaging code
B = bulk
D = 7.5
N = 22.5
A = ammo
F = 10
R = 27.5
R = reel
I = 15
W = 37.5
polypropylene film
double-sided metallized polyester film
non-inductive type
tinned wire
plastic case, epoxy resin filled. Box
material is solvent resistant and flame
retardant according to UL94 V0
Marking:
manufacturer’s logo, series (R76),
dielectric code (MKP), capacitance,
tolerance, D.C. voltage, manufacturing
date code
Climatic category:
55/100/56 IEC 60068-1
Operating temperature range:
-55 to +105°C
Related documents:
IEC 60384-16; CECC 31200
Dielectric:
Plates:
Winding:
Leads:
Protection:
Lead spacing (mm)
Lead length (mm) – (Applies to bulk
packaging only. Omit for standard lead
length 4-6mm.)
L = 24-27
T = 3.5-4.0
V = 2.7-3.3
8.
Note:
Internal code
Ammo-pack is the preferred packaging for taped version.
NISSEI-ARCOTRONICS
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES
D.C. AND PULSE APPLICATIONS
SERIES CODE:
R76
double-sided metallized
polyester carrier film
polypropylene
film dielectric
1 section
(250Vdc)
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
3.0 8.0 10.0 7.5 1100 55 E4
6800ρF
3.0 8.0 10.0 7.5 1100 55 E4
8200ρF
0.010µF 3.0 8.0 10.0 7.5 1100 55 E4
0.012µF 3.5 8.5 10.5 7.5 1100 55 E4
0.015µF 3.5 8.5 10.5 7.5 1100 55 E4
0.018µF 3.5 8.5 10.5 7.5 1100 55 E4
0.022µF 4.0 9.0 10.5 7.5 1100 55 E4
0.027µF 5.0 11.0 10.5 7.5 1100 55 E4
0.033µF 5.0 11.0 10.5 7.5 1100 55 E4
0.039µF 6.0 12.0 10.5 7.5 1100 55 E4
0.047µF 6.0 12.0 10.5 7.5 1100 55 E4
0.027µF 4.0 9.0 13.0 10.0 1000 50 E4
0.033µF 4.0 9.0 13.0 10.0 1000 50 E4
0.039µF 4.0 9.0 13.0 10.0 1000 50 E4
0.047µF 5.0 11.0 13.0 10.0 1000 50 E4
0.056µF 5.0 11.0 13.0 10.0 1000 50 E4
0.068µF 6.0 12.0 13.0 10.0 1000 50 E4
0.082µF 6.0 12.0 13.0 10.0 1000 50 E4
0.068µF 5.0 11.0 18.0 15.0 550 28 E4
0.082µF 5.0 11.0 18.0 15.0 550 28 E4
5.0 11.0 18.0 15.0 550 28 E4
0.10µF
6.0 12.0 18.0 15.0 550 28 E4
0.12µF
6.0 12.0 18.0 15.0 550 28 E4
0.15µF
7.5 13.5 18.0 15.0 550 28 E4
0.18µF
7.5 13.5 18.0 15.0 550 28 E4
0.22µF
8.5 14.5 18.0 15.0 550 28 E4
0.27µF
0.33µF 10.0 16.0 18.0 15.0 550 28 E4
0.39µF 10.0 16.0 18.0 15.0 550 28 E4
Tolerance: H (±2.5%); J (± 5%); K (±10%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
250Vdc/180Vac
Rated
Cap.
Part Number
R76682-250-D-
R76822-250-D-
R76103-250-D-
R76123-250-D-
R76153-250-D-
R76183-250-D-
R76223-250-D-
R76273-250-D-
R76333-250-D-
R76393-250-D-
R76473-250-D-
R76273-250-F-
R76333-250-F-
R76393-250-F-
R76473-250-F-
R76563-250-F-
R76683-250-F-
R76823-250-F-
R76683-250-I-
R76823-250-I-
R76104-250-I-
R76124-250-I-
R76154-250-I-
R76184-250-I-
R76224-250-I-
R76274-250-I-
R76334-250-I-
R76394-250-I-
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
6.0 15.0 26.5 22.5 250 13 E4
0.22µF
6.0 15.0 26.5 22.5 250 13 E4
0.27µF
6.0 15.0 26.5 22.5 250 13 E4
0.33µF
7.0 16.0 26.5 22.5 250 13 E4
0.39µF
7.0 16.0 26.5 22.5 250 13 E4
0.47µF
8.5 17.0 26.5 22.5 250 13 E4
0.56µF
0.68µF 10.0 18.5 26.5 22.5 250 13 E4
0.82µF 10.0 18.5 26.5 22.5 250 13 E4
11.0 20.0 26.5 22.5 250 13 E4
1.0µF
9.0 17.0 32.0 27.5 200 10 E4
0.82µF
11.0 20.0 32.0 27.5 200 10 E4
1.0µF
11.0 20.0 32.0 27.5 200 10 E4
*1.2µF
13.0 22.0 32.0 27.5 200 10 E4
*1.5µF
15.0 24.5 32.0 27.5 200 10 E4
*1.8µF
15.0 24.5 32.0 27.5 200 10 E4
*2.2µF
18.0 33.0 32.0 27.5 200 10 E4
*2.7µF
18.0 33.0 32.0 27.5 200 10 E4
*3.3µF
18.0 33.0 32.0 27.5 200 10 E4
*3.9µF
22.0 37.0 32.0 27.5 200 10 E4
*4.7µF
19.0 32.0 41.5 37.5 100
5 E4
5.6µF
20.0 40.0 41.5 37.5 100
5 E4
6.8µF
20.0 40.0 41.5 37.5 100
5 E4
8.2µF
5 E4
10.0µF 24.0 44.0 41.5 37.5 100
Tolerance: H (±2.5%); J (± 5%); K (±10%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
250Vdc/180Vac
Rated
Cap.
Part Number
R76224-250-N-
R76274-250-N-
R76334-250-N-
R76394-250-N-
R76474-250-N-
R76564-250-N-
R76684-250-N-
R76824-250-N-
R76105-250-N-
R76824-250-R-
R76105-250-R-
R76125-250-R-
R76155-250-R-
R76185-250-R-
R76225-250-R-
R76275-250-R-
R76335-250-R-
R76395-250-R-
R76475-250-R-
R76565-250-W-
R76685-250-W-
R76825-250-W-
R76106-250-W-
*
These values are available in pitch 37.5mm upon
request.
All dimensions are in mm.
Note:
If the working voltage (V) is lower than the rated voltage (V
R
), the capacitor may work at higher dv/dt. In this case
the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V
R
/V. The
pulse characteristic K
0
depends on the voltage waveform and in any case it cannot exceed the value given in the
above table. The dv/dt test is carried out at 2 times the above values.
NISSEI-ARCOTRONICS
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES
D.C. AND PULSE APPLICATIONS
SERIES CODE:
R76
double-sided metallized
polyester carrier film
polypropylene
film dielectric
1 section
(400Vdc)
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
3.0
8.0 10.0 7.5 1700 136 E4
2700ρF
3.0
8.0 10.0 7.5 1700 136 E4
3300ρF
3.0
8.0 10.0 7.5 1700 136 E4
3900ρF
3.0
8.0 10.0 7.5 1700 136 E4
4700ρF
3.0
8.0 10.0 7.5 1700 136 E4
5600ρF
3.5
8.5 10.5 7.5 1700 136 E4
6800ρF
3.5
8.5 10.5 7.5 1700 136 E4
8200ρF
3.5
8.5 10.5 7.5 1700 136 E4
0.010µF
4.0
9.0 10.5 7.5 1700 136 E4
0.012µF
5.0 11.0 10.5 7.5 1700 136 E4
0.015µF
5.0 11.0 10.5 7.5 1700 136 E4
0.018µF
6.0 12.0 10.5 7.5 1700 136 E4
0.022µF
6.0 12.0 10.5 7.5 1700 136 E4
0.027µF
4.0
9.0 13.0 10.0 1500 120 E4
0.010µF
4.0
9.0 13.0 10.0 1500 120 E4
0.012µF
4.0
9.0 13.0 10.0 1500 120 E4
0.015µF
4.0
9.0 13.0 10.0 1500 120 E4
0.018µF
4.0
9.0 13.0 10.0 1500 120 E4
0.022µF
5.0 11.0 13.0 10.0 1500 120 E4
0.027µF
5.0 11.0 13.0 10.0 1500 120 E4
0.033µF
6.0 12.0 13.0 10.0 1500 120 E4
0.039µF
6.0 12.0 13.0 10.0 1500 120 E4
0.047µF
5.0 11.0 18.0 15.0 900 72 E4
0.033µF
5.0 11.0 18.0 15.0 900 72 E4
0.039µF
5.0 11.0 18.0 15.0 900 72 E4
0.047µF
5.0 11.0 18.0 15.0 900 72 E4
0.056µF
6.0 12.0 18.0 15.0 900 72 E4
0.068µF
6.0 12.0 18.0 15.0 900 72 E4
0.082µF
7.5 13.5 18.0 15.0 900 72 E4
0.10µF
7.5 13.5 18.0 15.0 900 72 E4
0.12µF
8.5 14.5 18.0 15.0 900 72 E4
0.15µF
10.0 16.0 18.0 15.0 900 72 E4
0.18µF
10.0 16.0 18.0 15.0 900 72 E4
0.22µF
Tolerance: H (±2.5%); J (± 5%); K (±10%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
400Vdc/250Vac**
Rated
Cap.
Part Number
R76272-400-D-
R76332-400-D-
R76392-400-D-
R76472-400-D-
R76562-400-D-
R76682-400-D-
R76822-400-D-
R76103-400-D-
R76123-400-D-
R76153-400-D-
R76183-400-D-
R76223-400-D-
R76273-400-D-
R76103-400-F-
R76123-400-F-
R76153-400-F-
R76183-400-F-
R76223-400-F-
R76273-400-F-
R76333-400-F-
R76393-400-F-
R76473-400-F-
R76333-400-I-
R76393-400-I-
R76473-400-I-
R76563-400-I-
R76683-400-I-
R76823-400-I-
R76104-400-I-
R76124-400-I-
R76154-400-I-
R76184-400-I-
R76224-400-I-
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
6.0 15.0 26.5 22.5 500 40 E4
0.12µF
6.0 15.0 26.5 22.5 500 40 E4
0.15µF
6.0 15.0 26.5 22.5 500 40 E4
0.18µF
7.0 16.0 26.5 22.5 500 40 E4
0.22µF
8.5 17.0 26.5 22.5 500 40 E4
0.27µF
8.5 17.0 26.5 22.5 500 40 E4
0.33µF
0.39µF 10.0 18.5 26.5 22.5 500 40 E4
0.47µF 10.0 18.5 26.5 22.5 500 40 E4
9.0 17.0 32.0 27.5 300 24 E4
0.39µF
9.0 17.0 32.0 27.5 300 24 E4
0.47µF
0.56µF 11.0 20.0 32.0 27.5 300 24 E4
0.68µF 11.0 20.0 32.0 27.5 300 24 E4
0.82µF 13.0 22.0 32.0 27.5 300 24 E4
*1.0µF 15.0 24.5 32.0 27.5 300 24 E4
*1.2µF 15.0 24.5 32.0 27.5 300 24 E4
*1.5µF 18.0 33.0 32.0 27.5 300 24 E4
*1.8µF 18.0 33.0 32.0 27.5 300 24 E4
*2.2µF 22.0 37.0 32.0 27.5 300 24 E4
*2.7µF 22.0 37.0 32.0 27.5 300 24 E4
19.0 32.0 41.5 37.5 180 14 E4
3.3µF
20.0 40.0 41.5 37.5 180 14 E4
3.9µF
20.0 40.0 41.5 37.5 180 14 E4
4.7µF
24.0 44.0 41.5 37.5 180 14 E4
5.6µF
Tolerance: H (±2.5%); J (± 5%); K (±10%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
400Vdc/250Vac**
Rated
Cap.
Part Number
R76124-400-N-
R76154-400-N-
R76184-400-N-
R76224-400-N-
R76274-400-N-
R76334-400-N-
R76394-400-N-
R76474-400-N-
R76394-400-R-
R76474-400-R-
R76564-400-R-
R76684-400-R-
R76824-400-R-
R76105-400-R-
R76125-400-R-
R76155-400-R-
R76185-400-R-
R76225-400-R-
R76275-400-R-
R76335-400-W-
R76395-400-W-
R76475-400-W-
R76565-400-W-
*
**
These values are available in pitch 37.5mm upon
request.
Not suitable for across-the line applications. Please
refer to Interference Suppression Capacitors.
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage (V
R
), the capacitor may work at higher dv/dt. In this case
the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V
R
/V. The
pulse characteristic K
0
depends on the voltage waveform and in any case it cannot exceed the value given in the
above table. The dv/dt test is carried out at 2 times the above values.
NISSEI-ARCOTRONICS
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES
D.C. AND PULSE APPLICATIONS
SERIES CODE:
R76
double-sided metallized
polyester carrier film
polypropylene film
dielectric
2 sections
(630Vdc/400Vac)
Rated
Cap.
630 Vdc/400Vac
double-sided metallized
polyester carrier film
1 section
(630Vdc/250Vac)
Rated
Cap.
630Vdc/250Vac**
polypropylene
film dielectric
single-sided metallized
polypropylene film
Part Number
R76392-630-F-
R76472-630-F-
R76562-630-F-
R76682-630-F-
R76822-630-F-
R76103-630-F-
R76123-630-F-
R76153-630-F-
R76183-630-F-
R76123-630-I-
R76153-630-I-
R76183-630-I-
R76223-630-I-
R76273-630-I-
R76333-630-I-
R76393-630-I-
R76473-630-I-
R76563-630-I-
R76683-630-I-
R76823-630-I-
R76104-630-I-
R76473-630-N-
R76563-630-N-
R76683-630-N-
R76823-630-N-
R76104-630-N-
R76124-630-N-
R76154-630-N-
R76184-630-N-
R76224-630-N-
R76154-630-R-
R76184-630-R-
R76224-630-R-
R76274-630-R-
R76334-630-R-
R76394-630-R-
R76474-630-R-
R76564-630-R-
R76684-630-R-
R76824-630-R-
R76105-630-R-
R76125-630-R-
R76155-630-R-
R76185-630-R-
R76225-630-W-
R76275-630-W-
R76335-630-W-
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
3.0 8.0 10.0 7.5 2800 353 E4
680ρF
3.0 8.0 10.0 7.5 2800 353 E4
820ρF
3.0 8.0 10.0 7.5 2800 353 E4
1000ρF
3.0 8.0 10.0 7.5 2800 353 E4
1200ρF
3.0 8.0 10.0 7.5 2800 353 E4
1500ρF
3.0 8.0 10.0 7.5 2800 353 E4
1800ρF
3.0 8.0 10.0 7.5 2800 353 E4
2200ρF
3.5 8.5 10.5 7.5 2800 353 E4
2700ρF
3.5 8.5 10.5 7.5 2800 355 E4
3300ρF
3.5 8.5 10.5 7.5 2800 353 E4
3900ρF
4.0 9.0 10.5 7.5 2800 353 E4
4700ρF
4.0 9.0 10.5 7.5 2800 353 E4
5600ρF
5.0 11.0 10.5 7.5 2800 353 E4
6800ρF
5.0 11.0 10.5 7.5 2800 353 E4
8200ρF
0.010µF 6.0 12.0 10.5 7.5 2800 353 E4
0.012µF 6.0 12.0 10.5 7.5 2800 353 E4
Tolerance: H (±2.5%); J (± 5%); K (±10%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
Part Number
R76681-630-D-
R76821-630-D-
R76102-630-D-
R76122-630-D-
R76152-630-D-
R76182-630-D-
R76222-630-D-
R76272-630-D-
R76332-630-D-
R76392-630-D-
R76472-630-D-
R76562-630-D-
R76682-630-D-
R76822-630-D-
R76103-630-D-
R76123-520-D-
Note:
If the working voltage (V) is lower than the rated
voltage (V
R
), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with
the ratio V
R
/V. The pulse characteristic K
0
depends
on the voltage waveform and in any case it cannot
exceed the value given in the above table. The
dv/dt test is carried out at 2 times the above values.
*
**
These values are available in pitch 37.5mm upon
request.
Not suitable for across-the-line applications. Please
refer to Interference Suppression Capacitors.
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
4.0 9.0 13.0 10.0 3000 378 E4
3900ρF
4.0 9.0 13.0 10.0 3000 378 E4
4700ρF
4.0 9.0 13.0 10.0 3000 378 E4
5600ρF
4.0 9.0 13.0 10.0 3000 378 E4
6800ρF
4.0 9.0 13.0 10.0 3000 378 E4
8200ρF
0.010µF 5.0 11.0 13.0 10.0 3000 378 E4
0.012µF 5.0 11.0 13.0 10.0 3000 378 E4
0.015µF 6.0 12.0 13.0 10.0 3000 378 E4
0.018µF 6.0 12.0 13.0 10.0 3000 378 E4
0.012µF 5.0 11.0 18.0 15.0 2500 315 E4
0.015µF 5.0 11.0 18.0 15.0 2500 315 E4
0.018µF 5.0 11.0 18.0 15.0 2500 315 E4
0.022µF 5.0 11.0 18.0 15.0 2500 315 E4
0.027µF 5.0 11.0 18.0 15.0 2500 315 E4
0.033µF 6.0 12.0 18.0 15.0 2500 315 E4
0.039µF 6.0 12.0 18.0 15.0 2500 315 E4
0.047µF 7.5 13.5 18.0 15.0 2500 315 E4
0.056µF 7.5 13.5 18.0 15.0 2500 315 E4
0.068µF 8.5 14.5 18.0 15.0 2500 315 E4
0.082µF 8.5 14.5 18.0 15.0 2500 315 E4
0.10µF 10.0 16.0 18.0 15.0 2500 315 E4
0.047µF 6.0 15.0 26.5 22.5 1500 189 E4
0.056µF 6.0 15.0 26.5 22.5 1500 189 E4
0.068µF 6.0 15.0 26.5 22.5 1500 189 E4
0.082µF 6.0 15.0 26.5 22.5 1500 189 E4
6.0 15.0 26.5 22.5 1500 189 E4
0.10µF
7.0 16.0 26.5 22.5 1500 189 E4
0.12µF
8.5 17.0 26.5 22.5 1500 189 E4
0.15µF
8.5 17.0 26.5 22.5 1500 189 E4
0.18µF
0.22µF 10.0 18.5 26.5 22.5 1500 189 E4
9.0 17.0 32.0 27.5 900 113 E4
0.15µF
9.0 17.0 32.0 27.5 900 113 E4
0.18µF
9.0 17.0 32.0 27.5 900 113 E4
0.22µF
9.0 17.0 32.0 27.5 900 113 E4
0.27µF
*0.33µF 10.0 20.0 32.0 27.5 900 113 E4
*0.39µF 11.0 20.0 32.0 27.5 900 113 E4
*0.47µF 13.0 22.0 32.0 27.5 900 113 E4
*0.56µF 13.0 22.0 32.0 27.5 900 113 E4
*0.68µF 15.0 24.5 32.0 27.5 900 113 E4
*0.82µF 14.0 28.0 32.0 27.5 900 113 E4
*1.0µF 18.0 33.0 32.0 27.5 900 113 E4
*1.2µF 18.0 33.0 32.0 27.5 900 113 E4
*1.5µF 22.0 37.0 32.0 27.5 900 113 E4
*1.8µF 22.0 37.0 32.0 27.5 900 113 E4
20.0 40.0 41.5 37.5 450 56 E4
2.2µF
20.0 40.0 41.5 37.5 450 56 E4
2.7µF
24.0 44.0 41.5 37.5 450 56 E4
3.3µF
Tolerance: H (±2.5%); (J (± 5%); K (±10%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
O it f
t d d (4 6)
NISSEI-ARCOTRONICS
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES
D.C. AND PULSE APPLICATIONS
SERIES CODE:
R76
double-sided metallized
polyester carrier film
polypropylene film
dielectric
2 sections
(1000Vdc)
Rated
Cap.
470ρF
560ρF
680ρF
820ρF
1000ρF
1200ρF
1500ρF
1800ρF
2200ρF
2700ρF
Rated
Cap.
1000Vdc/400Vac
B
3.0
3.0
3.5
3.5
3.5
4.0
5.0
5.0
5.0
6.0
H
8.0
8.0
8.5
8.5
8.5
9.0
11.0
11.0
11.0
12.0
L
10.0
10.0
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
P
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
Max
dv/dt
(V/µs)
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
Max K
0
(V /µs)
1200 E4
1200 E4
1200 E4
1200 E4
1200 E4
1200 E4
1200 E4
1200 E4
1200 E4
1200 E4
2
single-sided metallized
polypropylene film
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
0.027µF 6.0 15.0 26.5 22.5 2100 420 E4
0.033µF 6.0 15.0 26.5 22.5 2100 420 E4
0.039µF 6.0 15.0 26.5 22.5 2100 420 E4
0.047µF 7.0 16.0 26.5 22.5 2100 420 E4
0.056µF 7.0 16.0 26.5 22.5 2100 420 E4
0.068µF 8.5 17.0 26.5 22.5 2100 420 E4
0.082µF 10.0 18.5 26.5 22.5 2100 420 E4
0.10µF 10.0 18.5 26.5 22.5 2100 420 E4
0.12µF 11.0 20.0 26.5 22.5 2100 420 E4
0.10µF 10.0 20.0 32.0 27.5 1000 200 E4
0.12µF 10.0 20.0 32.0 27.5 1000 200 E4
0.15µF 11.0 20.0 32.0 27.5 1000 200 E4
*0.18µF 13.0 22.0 32.0 27.5 1000 200 E4
*0.22µF 13.0 22.0 32.0 27.5 1000 200 E4
*0.27µF 15.0 24.5 32.0 27.5 1000 200 E4
*0.33µF 14.0 28.0 32.0 27.5 1000 200 E4
*0.39µF 18.0 33.0 32.0 27.5 1000 200 E4
*0.47µF 18.0 33.0 32.0 27.5 1000 200 E4
*0.56µF 22.0 37.0 32.0 27.5 1000 200 E4
*0.68µF 22.0 37.0 32.0 27.5 1000 200 E4
0.82µF 20.0 40.0 41.5 37.5 500 100 E4
20.0 40.0 41.5 37.5 500 100 E4
1.0µF
24.0 44.0 41.5 37.5 500 100 E4
1.2µF
24.0 44.0 41.5 37.5 500 100 E4
1.5µF
Tolerance: H (± 2.5%); J (± 5%); K (±10%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
1000Vdc/600Vac
Rated
Cap.
Part Number
R76273-1000-N-
R76333-1000-N-
R76393-1000-N-
R76473-1000-N-
R76563-1000-N-
R76683-1000-N-
R76823-1000-N-
R76104-1000-N-
R76124-1000-N-
R76104-1000-R-
R76124-1000-R-
R76154-1000-R-
R76184-1000-R-
R76224-1000-R-
R76274-1000-R-
R76334-1000-R-
R76394-1000-R-
R76474-1000-R-
R76564-1000-R-
R76684-1000-R-
R76824-1000-W-
R76105-1000-W-
R76125-1000-W-
R76155-1000-W-
Part Number
R76471-1000-D-
R76561-1000-D-
R76681-1000-D-
R76821-1000-D-
R76102-1000-D-
R76122-1000-D-
R76152-1000-D-
R76182-1000-D-
R76222-1000-D-
R76272-1000-D-
Max
Max K
0
Part Number
dv/dt
2
B
H
L
P (V/µs) (V /µs)
4.0 9.0 13.0 10.0 4800 960 E4 R76102-1000-F-
1000ρF
4.0 9.0 13.0 10.0 4800 960 E4 R76122-1000-F-
1200ρF
4.0 9.0 13.0 10.0 4800 960 E4 R76152-1000-F-
1500ρF
4.0 9.0 13.0 10.0 4800 960 E4 R76182-1000-F-
1800ρF
4.0 9.0 13.0 10.0 4800 960 E4 R76222-1000-F-
2200ρF
4.0 9.0 13.0 10.0 4800 960 E4 R76272-1000-F-
2700ρF
4.0 9.0 13.0 10.0 4800 960 E4 R76332-1000-F-
3300ρF
5.0 11.0 13.0 10.0 4800 960 E4 R76392-1000-F-
3900ρF
5.0 11.0 13.0 10.0 4800 960 E4 R76472-1000-F-
4700ρF
6.0 12.0 13.0 10.0 4800 960 E4 R76562-1000-F-
5600ρF
6.0 12.0 13.0 10.0 4800 960 E4 R76682-1000-F-
6800ρF
5.0 11.0 18.0 15.0 3300 660 E4
R76822-1000-I-
8200ρF
R76103-1000-I-
0.010µF 5.0 11.0 18.0 15.0 3300 660 E4
R76123-1000-I-
0.012µF 5.0 11.0 18.0 15.0 3300 660 E4
R76153-1000-I-
0.015µF 6.0 12.0 18.0 15.0 3300 660 E4
R76183-1000-I-
0.018µF 7.5 13.5 18.0 15.0 3300 660 E4
R76223-1000-I-
0.022µF 7.5 13.5 18.0 15.0 3300 660 E4
R76273-1000-I-
0.027µF 8.5 14.5 18.0 15.0 3300 660 E4
R76333-1000-I-
0.033µF 8.5 14.5 18.0 15.0 3300 660 E4
R76393-1000-I-
0.039µF 10.0 16.0 18.0 15.0 3300 660 E4
Tolerance: H (± 2.5%) for C≥1000ρF; J (± 5%); K (±10%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
1000Vdc/600Vac
*
These values are available in pitch 37.5mm upon
request.
All dimensions are in mm.
Note:
If the working voltage (V) is lower than the rated voltage (V
R
), the capacitor may work at higher dv/dt. In this case
the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V
R
/V. The
pulse characteristic K
0
depends on the voltage waveform and in any case it cannot exceed the value given in the
above table. The dv/dt test is carried out at 2 times the above values.
无线连接
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
