HLMP-EGxx, HLMP-ELxx
T-1¾ (5 mm) High Brightness AlInGaP Red and Amber LEDs
Data Sheet
Description
These Precision Optical Performance AlInGaP LEDs
provide superior light output for excellent readability in
sunlight and are extremely reliable. AlInGaP LED tech-
nology provides extremely stable light output over long
periods of time. Precision Optical Performance lamps
utilize the aluminum indium gallium phosphide (AlInGaP)
technology.
These LED lamps are untinted. T-1¾ packages incorpo-
rating second generation optics producing well defined
spatial radiation patterns at specific viewing cone angles.
These lamps are made with an advanced optical grade
epoxy offering superior high temperature and high
moisture resistance performance in outdoor signal and
sign application. The maximum LED junction tempera-
ture limit of +130° C enables high temperature operation
in bright sunlight conditions. The epoxy contains uv
inhibitor to reduce the effects of long term exposure to
direct sunlight.
Features
•
Viewing angle: 15°, 23° and 30°
•
Well defined spatial radiation pattern
•
High brightness material
•
Available in Red and Amber
– Red AlInGaP 626 nm
– Amber AlInGaP 590 nm
•
Superior resistance to moisture
•
Standoff and non-standoff Package
Applications
•
Traffic management:
– Traffic signals
– Pedestrian signals
– Work zone warning lights
– Variable message signs
•
Solar Power signs
•
Commercial outdoor advertising
– Signs
– Marquee
Benefits
•
Superior performance for outdoor environment
•
Suitable for auto-insertion onto PC board
Package Dimension
A: Non-standoff
5.00 ± 0.20
(0.197 ± 0.008)
8.71 ± 0.20
(0.343 ± 0.008)
1.14 ± 0.20
(0.045 ± 0.008)
d
B: Standoff
5.00 ± 0.20
(0.197 ± 0.008)
8.71 ± 0.20
(0.343 ± 0.008)
0.70 (0.028)
MAX.
31.60
MIN.
(1.244)
2.35 (0.093)
MAX.
1.14 ± 0.20
(0.045 ± 0.008)
31.60
MIN.
(1.244)
1.50 ± 0.15
(0.059 ± 0.006)
0.70 (0.028)
MAX.
CATHODE
LEAD
CATHODE
LEAD
1.00 MIN.
(0.039)
0.50 ± 0.10
SQ. TYP.
(0.020 ± 0.004)
1.00 MIN.
(0.039)
0.50 ± 0.10
SQ. TYP.
(0.020 ± 0.004)
CATHODE
FLAT
5.80 ± 0.20
(0.228 ± 0.008)
2.54 ± 0.38
(0.100 ± 0.015)
CATHODE
FLAT
5.80 ± 0.20
(0.228 ± 0.008)
2.54 ± 0.38
(0.100 ± 0.015)
Part Number
HLMP-EG1H-xxxxx
HLMP-EL1H-xxxxx
HLMP-EG2H-xxxxx
HLMP-EL2H-xxxxx
HLMP-EG3H-xxxxx/HLMP-EL3H-xxxxx
Dimension ‘d’
12.30 ± 0.25mm
12.64 ± 0.25mm
12.10 ± 0.25mm
12.14 ± 0.25mm
12.10 ± 0.25mm
Notes:
1. All dimensions in millimeters (inches).
2. Tolerance is ± 0.20 mm unless other specified.
3. Leads are mild steel with tin plating.
4. The epoxy meniscus is 1.21 mm max.
5. For identification of polarity after the leads are trimmed off, please
refer to the illustration below:
CATHODE
ANODE
2
Device Selection Guide
Color and Dominant
Wavelength
λ
d
(nm)
Typ
[3]
Red 626
Red 626
Amber 590
Amber 590
Red 626
Red 626
Amber 590
Amber 590
Red 626
Red 626
Amber 590
Amber 590
Luminous Intensity Iv (mcd) at
20 mA
[1,2,5]
Min
9300
9300
9300
9300
7200
7200
5500
5500
4200
4200
4200
4200
Part Number
HLMP-EG1G-Y10DD
HLMP-EG1H-Y10DD
HLMP-EL1G-Y10DD
HLMP-EL1H-Y10DD
HLMP-EG2G-XZ0DD
HLMP-EG2H-XZ0DD
HLMP-EL2G-WY0DD
HLMP-EL2H-WY0DD
HLMP-EG3G-VX0DD
HLMP-EG3H-VX0DD
HLMP-EL3G-VX0DD
HLMP-EL3H-VX0DD
Max
21000
21000
21000
21000
16000
16000
12000
12000
9300
9300
9300
9300
Standoff
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Typical Viewing
angle (°)
[4]
15
23
30
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package and it is tested with pulsing condition.
2. The optical axis is closely aligned with the package mechanical axis.
3. Dominant wavelength,
λ
d
, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4.
θ
½
is the off-axis angle where the luminous intensity is half the on-axis intensity.
5. Tolerance for each bin limit is ± 15%
Part Numbering System
HLMP – E x xx – x x x xx
Packaging Option
DD: Ammopack
Color Bin Selection
0 : Full Distribution
K: Color bin 2 and 4
L: Color bin 4 and 6
Maximum Intensity Bin
Minimum Intensity Bin
Refer to Device Selection Guide
Refer to Device Selection Guide
Viewing Angle and Lead Stando
1G :
1H :
2G :
2H :
3G :
3H :
15 without stando
15 with stando
23 without stando
23 with stando
30 without stando
30 with stando
Color
G : Red
L : Amber
Package
E: 5 mm Standard Round
Note: Refer to AB 5337 for complete information on the part numbering system.
3
Absolute Maximum Ratings
T
J
= 25° C
Parameter
DC Forward Current
[1]
Peak Forward Current
Power Dissipation
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Notes:
1. Derate linearly as shown in Figure 4.
2. Duty Factor 30%, frequency 1 kHz.
Red/ Amber
50
100
[2]
120
130
-40 to +100
-40 to +100
Unit
mA
mA
mW
°C
°C
°C
Electrical / Optical Characteristics
T
J
= 25° C
Parameter
Forward Voltage
Red & Amber
Reverse Voltage
[3]
Red & Amber
Dominant Wavelength
[1]
Red
Amber
Peak Wavelength
Red
Amber
Thermal resistance
Luminous Efficacy
[2]
Red
Amber
Thermal coefficient of
ld
Red
Amber
Symbol
V
F
V
R
l
d
Min.
1.8
5
Typ.
2.1
Max.
2.4
Units
V
V
nm
Test Conditions
I
F
= 20 mA
I
R
= 100
μA
I
F
= 20 mA
618.0
584.5
626.0
590.0
634
594
240
190
490
0.05
0.09
630.0
594.5
l
PEAK
nm
Peak of Wavelength of Spec-
tral Distribution at I
F
= 20 mA
LED junction to pin
Emitted Luminous Power/
Emitted Radiant Power
I
F
= 20 mA;
+25° C ≤ T
J
≤ +100° C
Rq
J-PIN
η
v
°C/W
lm/W
nm/°C
Notes:
1. The dominant wavelength is derived from the Chromaticity Diagram and represents the color of the lamp.
2. The radiant intensity, I
e
in watts per steradian, maybe found from the equation I
e
= I
v
/
η
V
where I
v
is the luminous intensity in candela and
η
V
is
the luminous efficacy in lumens/ watt.
3. Indicates product final testing condition, long term reverse bias is not recommended.
4
1.0
0.8
RELATIVE INTENSITY
0.6
0.4
0.2
0.0
500
Amber
100
80
60
40
20
0
FORWARD CURRENT-mA
Red
550
600
WAVELENGTH - nm
650
700
0
1
2
FORWARD VOLTAGE-V
3
Figure 1.
Relative Intensity vs Wavelength
Figure 2.
Forward Current vs Forward Voltage
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
60
I
F
- FORWARD CURRENT - mA
0
20
40
60
DC FORWARD CURRENT - mA
80
100
50
40
30
20
10
0
0
20
40
60
80
T
A
- AMBIENT TEMPERATURE - ºC
100
120
Figure 3.
Relative Intensity vs Forward Current
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
Figure 4. Maximum Forward Current vs Ambient Temperature
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-90
-60
-30
0
30
60
ANGULAR DISPLACEMENT - DEGREES
90
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
NORMALIZED INTENSITY
NORMALIZED INTENSITY
-90
-60
-30
0
30
60
ANGULAR DISPLACEMENT - DEGREES
90
Figure 5. Representative Radiation pattern for 15° Viewing Angle Lamp
Figure 6. Representative Radiation pattern for 23° Viewing Angle Lamp
5
Linux开发
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
