Tantalum Capacitor ( SCS Series )
The product is smaller version of the SCN series products.
The SCS series have fully molded, compliant lead frame construction designed for use
in applications utilizing solder (Reflow, Wave or Vapor Phase), conductive adhesive or
thermal compression bonding techniques.
General Features
Miniaturized tantalum chip capacitors with extended capacitance.
(Reduced size 1/2 to 1/3 in comparison with SCN.)
- Molded Case available in five case codes.
- Compatible with automatic pick and place equipment.
- Meets or Exceeds EIA standard 535BAAC .
- Extended Range Values
Applications
- General electronic equipment
- Smoothing Circuit of DC-DC Converters & Output side of AC-DC Converters
- De-Coupling Circuit of High Speed ICs & MPUs
- Various Other High Frequency Circuit Applications
Part Numbering
TC
1
●
SCS 0J
2
3
● ●
106
4
●
M
5
●
B
6
●
A
7
●
R
8
●
0
1
●
Abbreviation of Tantalum Capacitor
5
●
Capacitance Tolerance
6
●
Case size
7
●
Packing
8
●
Packing Polarity
●
Type of Series
2
3
●
Rated Voltage
4
●
Capacitance Tolerance
RELIABILITY TEST CONDITION
Reliability Test and Judgment Condition 1
Item
Capacitance
Tan
δ
(DF)
Impedance (Z) & ESR
Leakage current
Performance
Within specified tolerance
Within specified value
Within specified value
0.01CV or 0.5㎂ whichever is greater
Test condition
120㎐, maximum 1.0Vrms, maximum
1.5Volt D.C, at 25℃
120㎐, maximum 1.0Vrms, maximum
1.5Volt D.C, at 25℃
100k㎐, maximum 1.0Vrms, maximum
1.5Volt D.C, at 25℃
The rated DC voltage shall be applied to
terminals across the test capacitor
charge Time: 5 min.
From -55℃ to 125℃,
Temperature
Characteristics
"-55℃ :
△C/C
-10~0%
"+85℃ :
△C/C
0~10%
"+125℃ :
△C/C
0~15%
Capacitance change : within
±5
%
Tan
δ,
LC : initial spec.
Surge withstanding
Voltage
85±2℃, Surge voltage
Charge 30±5s -> Discharge 5.5±0.5min
1000cycle
Charge discharge resister :33Ω
19.6N, for 5±1 sec
Bending to the limit (3mm)
with 1.0mm/sec.
SnAg3.0Cu0.5 solder
:245+/5℃, 3±0.3sec
(preheating : 80~120℃ for 10~30sec.)
Solder pot : 260±5℃, 10±1sec.
Adhesion Strength
Electrode Strength
No peeling shall be occur on the terminal
electrode
Within specified tolerance
Tan
δ,
LC : initial spec.
More than 95% of terminal surface is to be
soldered newly
Solderability
Resistance to Soldering heat
Capacitance change : within
±15%
Tan
δ,
LC : initial spec.
Capacitance change : within
±5%
Tan
δ,
LC : initial spec.
Capacitance change : within
±10%
Tan
δ,
LC : initial spec.
Capacitance change : within
±10%
Tan
δ
:initial spec
LC
: 125% or less specified initial value
Capacitance change : within
±10%
Tan
δ,
LC : initial spec.
Capacitance change : within
±5%
Tan
δ,
LC : initial spec
Vibration Test
Amplitude : 1.5mm
From 10Hz to 55Hz (return : 1min.)
2hours
´
3 direction (x, y, z)
40±2℃, 90~95%RH, 500+8/-0hrs
Moisture Resistance
High Temperature Resistance
With the rated voltage(85℃)
Max. operating temperature(125
℃)
2000/-0hrs
-55±2℃, 240±8hrs
Storage at Low Temperature
Temperature Cycling
1 cycle condition
(Min. operating temperature
→
25℃
→
Max. operating temperature
→
25℃)
5 cycle test
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
