YETDA INDUSTRY LTD.
5mm Yellow-Green LED Lamps
500GN1D
* 5mm with green dice。
* Encapsulated with green diffused color package。
* Long Leads。
Absolute Maximum Ratings :
Parameter
Peak Forward Current
Continuous Forward Current
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature
Electro-Optical Characteristics （Ta = 25℃）
Parameter Radiant
Forward Voltage
Reverse Current
Luminous Intensity
Spectral Bandwidth
Wavelength
Half View Angle
Test Condition Symbol
If = 20mA
Vr =
5V
If = 20mA
If = 20mA
If = 20mA
If = 20mA
Vf
Ir
Iv
Dλ
λp
λd
Maximum Rating
120
30
-20℃ to + 75℃
-40℃ + 100℃
260℃ for 5 seconds
Min.
Typ.
2.20
12
15
16
569
572
80
Unit
mA
mA
Max.
2.60
10
Unit
V
uA
mcd
nm
nm
575
nm
deg
2
q1/2
Package
YETDA INDUSTRY LTD.
•Soldering:
1. Manual of soldering
The temperature of the iron tip should not be higher than 260℃and
Soldering within 3 seconds per solder-land is to be observed
2.
DIP soldering (Wave Soldering):
within 5 sec.260℃(Max)
Gradual Cooling (Avoid quenching)
Preheating:120
℃~150℃
3. Reflow Soldering
Preheating:140℃~160℃±5℃,within 2 minutes.
Operation heating:235℃(Max)within 10 seconds(Max)
Gradual Cooling (Avoid quenching)
•Handling:
Care must be taken not to cause to the epoxy resin portion of Yetda LEDS while it is
exposed to high temperature.
Care must be taken not rub the epoxy resin portion of Yetda LEDS with hard or sharp article
such as the sand blast and the metal hook
NXP MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
