COMBO MICRO AND COAXIAL CONTACTS
OR MICRO AND POWER CONTACTS
20
14
1
20
7
A3
A4
A2
A1
SERIES
CCD
PLUG MATING FACE
RECEPTACLE MATING FACE
CCD
CRISTEK COMBO CONNECTOR
GENDER***
P = PLUG, PIN CONTACTS
S = RECEPTACLE, SOCKET CONTACTS
NUMBER/TYPE OF CONTACTS
MICRO/COAXIAL MICRO/POWER
05C2 20C4
05P2 20P4
HARDWARE
0 = NONE
FACTORY INSTALLED (NON-REMOVABLE)
F = FLOAT MOUNT
J = HIGH PROFILE HEX DRIVE JACKSCREW
K = HIGH PROFILE SLOTTED JACKSCREW
L = LOW PROFILE HEX DRIVE JACKSCREW
T = THREADED INSERT
M83513 HARDWARE - FACTORY INSTALLED
2 = LOW PROFILE HEX DRIVE JACKSCREW *
3 = HIGH PROFILE HEX DRIVE JACKSCREW
5 = LOW PROFILE SLOTTED JACKSCREW *
6 = HIGH PROFILE SLOTTED JACKSCREW
7 = JACKPOST KIT *
SHELL FINISH
A = CADMIUM
B = NICKEL
C = ANODIZE
D = CHEM FILM
E = BLACK CADMIUM
G = GOLD
P = PASSIVATION (STAINLESS STEEL)
A2
5
3
4
1
4
1
5
3
A1
A4
A3
7
14
A1
A2
X XXXX
X X X X XX X
05C2 & 05P2
A1
A2
1
20C4 & 20P4
WIRE LENGTH** (+1.00 / -0.00)
STRANDED
1 = 6 INCHES
2 = 12 INCHES
3 = 18 INCHES
4 = 24 INCHES
5 = 36 INCHES
6 = 72 INCHES
SOLID COPPER (+0.20 / -0.00)
1 = 0.5 INCH
2 = 1.0 INCH
3 = 0.25 INCH
WIRE SIZE
STRANDED WIRE
0 = 26 AWG
1 = 24 AWG
2 = 28 AWG
SOLID WIRE
0 = 25 AWG
1 = 24 AWG
COAX WIRE ****
0= NO SIGNIFICANCE
WIRE COLOR/TYPE
N = NONE (MICRO SOLDER CUP/COAX
CONFIGURATION ONLY)****
0 = WHITE STRANDED*
1 = YELLOW STRANDED
2 = 10 SOLID COLORS REPEATED*
3 = FULL COLOR CODE STRANDED
9 = SOLID COPPER*
COAX/POWER WIRE TYPE AND SIZE
0 = WHITE 16 AWG STRANDED*
1 = YELLOW 16 AWG STRANDED
3 = FULL COLOR CODE 16 AWG STRANDED
5 = MIL-C-17/93-RG178 (COAX)
6 = MIL-C-17/93-RG196 (COAX)
7 = SOLID COPPER
(OTHER CABLE OPTIONS ARE AVAILABLE,
CONTACT CRISTEK FOR DETAILS)
TERMINATION
00000 - ALL SOLDER CUPS (MICRO/POWER CONTACT CONFIGURATION ONLY)*
WIRE TYPE
N = NONE (MICRO SOLDER CUP/COAX CONFIGURATION ONLY)
STRANDED
H = HARNESS (MIL-W-16878/4)
M = MILITARY (MIL-W-22759/11)*
* = MOST COMMONLY USED & STOCKED
S = SPACE (MIL-W-22759/33)
WIRE TYPES AND HARDWARE OPTIONS
SOLID
** = COAX AND POWER WIRES WILL HAVE THE SAME
G = GOLD PLATED COPPER
LENGTHS AS THOSE FOR THE MICRO CONTACTS
T = TIN PLATED COPPER
*** = PLUG WILL HAVE MICRO PIN AND POWER/COAX SOCKET CONTACTS
RECEPTACLE WILL HAVE MICRO SOCKET AND POWER/COAX PIN CONTACTS
****= THE NUMBER "0" FOLLOWING "N" HAS NO SIGNIFICANCE
MATERIALS AND FINISHES ARE IAW MIL-DTL-83513 WHERE APPLICABLE.
FOR DETAILS SEE MIL-SPEC OR WWW.CRISTEK.COM
1. MATERIALS:
3. SPECIFICATIONS:
4. ADDITIONAL INFORMATION:
SHELL - ALUMINUM ALLOY/STAINLESS STEEL
INSULATOR - GLASS FILLED THERMOPLASTIC
CONTACT - COPPER ALLOY
INTERFACIAL SEAL - FLUOROSILICONE BLEND (20P4/20C4 ONLY)
SHELL - SEE OPTIONS ABOVE
CONTACT - GOLD OVER NICKEL
2. FINISH:
DESIGN AND PERFORMANCE IN GENERAL
CURRENT RATING (SIGNAL) ----- 3 AMPS MAX
ACCORDANCE WITH M83513 WHERE APPLICABLE
CURRENT RATING (POWER)----- 13 AMPS MAX
TEMPERATURE RATING ---------- -55° C TO +125° C
INSULATION RESISTANCE -------- 5000 MEGOHMS
DWV AT SEA LEVEL ---------------- 600 VAC
DWV AT 70,000 FT ALTITUDE --- 150 VAC
CONTACT RESISTANCE ------------ 8 MILLIOHMS MAX AT 2.5 AMPS
LOW LEVEL CONTACT-------------- 10 MILLIOHMS MAX
RESISTANCE
CONTACT RETENTION ------------ 5 LBS AXIAL LOAD
ENGAGEMENT FORCE ------------ 6 oz MAX
SEPARATION FORCE --------------- 0.5 oz MIN
TOLERANCE: .XXX ±.005
.XX ±.01
ANGLE ±1°
TITLE
COMBO
MICRO AND COAXIAL CONTACTS
OR MICRO AND POWER CONTACTS
DWG. NO.
SHT
2
OF
2
CCD
CRISTEK.COM
888.265.9162
H
REV
DSP 与 ARM 处理器
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
