SOMC
www.vishay.com
Vishay Dale
Thick Film Resistor Networks, Dual-In-Line, Medium Body,
Small Outline, Molded DIP, Surface Mount
FEATURES
• Isolated, bussed and dual terminator
schematics available
Available
• 14, 16, or 20 terminal package
• Molded case construction
• Thick film resistive elements
• Reflow solderable
Available
• Compatible with automatic surface mounting
equipment
• Reduces total assembly costs
• For wave flow soldering contact factory
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts
with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details
STANDARD ELECTRICAL SPECIFICATIONS
TEMPERATURE
GLOBAL CIRCUIT POWER RATING POWER RATING TOLERANCE
(3)
RESISTANCE MAXIMUM WORKING COEFFICIENT
(1)
RANGE
VOLTAGE
(2)
ELEMENT
P
70 °C
PACKAGE
P
70 °C
±%
MODEL
W
W
V
DC
± ppm/°C
01
0.08
1.05
1, 2, 5
10 to 1M
50
100
SOMC14
03
0.16
1.125
1, 2, 5
10 to 1M
50
100
05
0.08
1.05
1, 2, 5
10 to 1M
50
100
01
0.08
1.20
1, 2, 5
10 to 1M
50
100
SOMC16
03
0.16
1.28
1, 2, 5
10 to 1M
50
100
05
0.08
1.20
1, 2, 5
10 to 1M
50
100
01
0.08
1.52
1, 2, 5
10 to 1M
50
100
SOMC20
03
0.16
1.60
1, 2, 5
10 to 1M
50
100
05
0.08
1.52
1, 2, 5
10 to 1M
50
100
Notes
• DSCC has created series of drawings to support the need for a surface mount gull wing resistor network product. Vishay Dale is listed as a
resource on this drawing as follows:
POWER
POWER
TEMPERATURE MAXIMUM
RATING
RATING
RESISTANCE
VISHAY DALE
TOLERANCE
COEFFICIENT
WORKING
CIRCUIT ELEMENT PACKAGE
RANGE
MODEL
±%
(0 °C to 70 °C)
VOLTAGE
(2)
P
70 °C
P
70 °C
± ppm/°C
V
DC
W
W
SOMC1601..16
01 (B)
0.08
87012
SOMC1603..17
03 (A)
0.16
1.20
10 to 2.2M
1, 2, 5
100, 300
50
SOMC1605..48
05 (J)
0.08
SOMC1401..6
01 (B)
0.08
87013
SOMC1403..13
03 (A)
0.16
1.00
10 to 2.2M
1, 2, 5
100, 300
50
SOMC1405..22
05 (J)
0.08
These drawings can be viewed at:
www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg.
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
• Jumper: 0
-resistor
on request (100 m)
• Packaging: According to EIA; see appropriate catalog or web page
(1)
Temperature range: -55 °C to +125 °C
(2)
Continuous working voltage shall be
P
x
R
or maximum working voltage, whichever is less
(3)
± 2 % standard, ± 1 % and ± 5 % available
DSCC
DRAWING
NUMBER
TECHNICAL SPECIFICATIONS
PARAMETER
Rated dissipation at 70 °C per element
Limiting element voltage
(1)
Voltage coefficient
Insulation voltage (1 min)
Category temperature range
Insulation resistance
TC tracking (-55 °C to +125 °C)
Note
(1)
Rated voltage:
P
x
R
Revision: 18-Apr-17
UNIT
W
V
DC
ppm/V
V
DC/AC
peak
°C
ppm/°C
01 CIRCUIT
0.08
03 CIRCUIT
0.16
50
< 50
200
-55 / +150
> 10
10
50
05 CIRCUIT
0.08
Document Number: 31508
1
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
SOMC
www.vishay.com
Vishay Dale
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: SOMC16011K00GDC (preferred part numbering format)
S
GLOBAL
MODEL
SOMC
O
M
C
1
6
0
1
1
K
0
0
G
D
C
PIN COUNT
14
16
20
SCHEMATIC
01
= bussed
03
= isolated
00
= special
RESISTANCE
VALUE
R
=
K
= k
M
= M
10R0
= 10
680K
= 680 k
1M00
= 1.0 M
0000
= 0
jumper
01
SCHEMATIC
TOLERANCE
CODE
F
=±1%
G
=±2%
J
=±5%
S
= special
Z
=0
jumper
PACKAGING
EJ
= lead (Pb)-free, tube
EA
= lead (Pb)-free, tape and reel
DC
= tin / lead, tube
RZ
= tin / lead, tape and reel
SPECIAL
Blank = standard
(dash number)
(up to 3 digits)
from
1 to 999
as
applicable
Historical Part Number Example: SOMC1601102G (will continue to be accepted)
SOMC
HISTORICAL
MODEL
16
PIN COUNT
102
RESISTANCE
VALUE
G
TOLERANCE
CODE
D02
PACKAGING
New Global Part Numbering: SOMC2005500BGRZ (preferred part numbering format)
S
GLOBAL
MODEL
SOMC
O
M
C
2
0
0
5
5
0
0
B
G
R
Z
PIN COUNT
14
16
20
SCHEMATIC
05
=
dual terminator
RESISTANCE
VALUE
3 digit impedance
code, followed by
alpha modifier
(see Impedance
table)
05
TOLERANCE
CODE
F
=±1%
G
=±2%
J
=±5%
PACKAGING
EJ
= lead (Pb)-free, tube
EA
= lead (Pb)-free, tape and reel
DC
= tin / lead, tube
RZ
= tin / lead, tape and reel
SPECIAL
Blank = standard
(dash number)
up to 3 digits
from
1 to 999
as
applicable
R61
PACKAGING
Historical Part Number Example: SOMC2005820131G (will continue to be accepted)
SOMC
HISTORICAL
MODEL
20
PIN COUNT
820
RESISTANCE
VALUE 1
131
RESISTANCE
VALUE 2
G
TOLERANCE
CODE
SCHEMATIC
Note
• For additional information on packaging, refer to the Surface Mount Network Packaging document (www.vishay.com/doc?31540)
Revision: 18-Apr-17
Document Number: 31508
2
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
SOMC
www.vishay.com
Vishay Dale
CIRCUIT APPLICATIONS
01 Schematic
13, 15, or 19 resistors with one pin common
The SOMCxx01 circuit provides a choice of 13, 15, or 19 nominally equal resistors, each
connected between a common lead (14, 16, or 20) and a discrete PC board pin.
Commonly used in the following applications:
• MOS/ROM pull-up/pull-down
• Open collector pull-up
• “Wired OR” pull-up
• Power driven pull-up
• TTL input pull-down
• Digital pulse squaring
• TTL unused gate pull-up
• High speed parallels pull-up
Pin 1
SOMC14
SOMC16
SOMC20
03 Schematic
7, 8, or 10 isolated resistors
The SOMCxx03 circuit provides a choice of 7, 8, or 10 nominally equal resistors with each
resistor isolated from all others and wired directly across. Commonly used in the following
applications:
SOMC14
SOMC16
SOMC20
Pin 1
• “Wired OR” pull-up
• Power driven pull-up
• Powergate pull-up
• Line termination
• Long-line Impedance balancing
• LED current limiting
• ECL output pull-down
• TTL input pull-down
05 Schematic
TTL dual-line terminator; pulse squaring, 12, 14, or 18 pairs of resistors
(R
1
resistors are common to leads 14, 16, or 20)
(R
2
resistors are common to leads 7, 8, or 10)
The SOMCxx05 circuit contains 12, 14, or 18 pairs of resistors. Each pair is connected
between ground and a common line. The junctions of these resistor pairs are connected
to the input leads.
The 05 circuits are designed for TTL dual-line termination and pulse squaring.
R1
R2
R1
R2
R2
R1
R2
R1
R2
R1
R2
R1
R2
R1
R1
R2
R1
R2
R1
R2
R2
R1
R2
R1
R2
R1
R2
R1
SOMC14, SOMC16, SOMC20
Pin 1
DIMENSIONS
Pin 1
SOLDER PAD DIMENSIONS
in millimeters
a
WAVE
REFLOW
0.64
0.64
b
1.91
1.91
c
5.34
5.34
l
9.53
9.53
p
1.27
1.27
w
9.15
9.15
Notes
• The dimension shown are for a 16 pin part. For parts with different pin numbers use the same pitch and add or subtract pads as required
• Maximum solder reflow temperature +255 °C
DIMENSIONS
in millimeters
PIN NO#
14
16
20
Tol.
L
9.91
11.18
13.72
± 0.254
W
7.62
7.62
7.62
± 0.381
B
7.62
8.89
11.43
± 0.254
E
6.20
6.20
6.20
± 0.381
F
5.59
5.59
5.59
± 0.127
G
2.16
2.16
2.16
± 0.127
H
2.03
2.03
2.03
± 0.127
K
0.914
0.914
0.914
R
0.457
0.457
0.457
± 0.076
S
1.27
1.27
1.27
± 0.254
T
1.14
1.14
1.14
MARKING INFORMATION
1 % parts have 4 digits while 2 % and 5 % parts have 3 digits.
Revision: 18-Apr-17
Document Number: 31508
3
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
SOMC
www.vishay.com
Vishay Dale
R
2
()
130
200
210
260
240
270
390
270
330
CODE
141A
181A
191A
221B
281B
381B
501C
102A
202B
R
1
()
270
330
330
330
560
560
620
1.5K
3K
R
2
()
270
390
470
680
560
1.2K
2.7K
3.3K
6.2K
IMPEDANCE CODES
CODE
500B
750B
800C
990A
101C
111C
121B
121C
131A
R
1
()
82
120
130
160
180
180
180
220
220
Note
• For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc?31530)
PERFORMANCE
TEST
Power conditioning
Load life at 70 °C
Short time overload
Thermal shock
Moisture resistance
Resistance to soldering heat
Low temperature operation
Vibration
Shock
Terminal strength
CONDITIONS OF TEST
MIL-STD-202
MIL-STD-202
MIL-STD-202
MIL-STD-202
MIL-STD-202
MIL-STD-202
MIL-STD-202
MIL-STD-202
MIL-STD-202
MIL-STD-202
TEST RESULTS
(TYPICAL TEST LOTS)
± 0.5 %
± 0.5 %
± 0.25 %
± 0.5 %
± 0.5 %
± 0.25 %
± 0.25 %
± 0.25 %
± 0.25 %
± 0.25 %
MECHANICAL SPECIFICATIONS
Marking
Marking resistance to solvents
Maximum solder reflow temperature
Solderability
Terminals
Body
Model number, schematic number, value tolerance, pin 1 indicator, date code
Permanency testing per MIL-STD-202, method 215
+255 °C
Per MIL-STD-202, method 208E
Copper alloy. Solder dipped terminal
Molded epoxy
Revision: 18-Apr-17
Document Number: 31508
4
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
