19-5839; Rev 0; 4/11
MAX9263 Evaluation Kit
Evaluates: MAX9263/MAX9264
General Description
The MAX9263 evaluation kit (EV kit) provides a proven
design to evaluate the MAX9263 high-bandwidth digital-
content protection (HDCP) gigabit multimedia serial link
(GMSL) serializer with spread spectrum and full-duplex
control channel. The EV kit also includes Windows XP
M
-,
Windows Vista
M
-, and Windows
M
7-compatible software
that provides a simple graphical user interface (GUI) for
exercising the features of the device.
The EV kit comes with a MAX9263GCB/V+ installed.
For complete GMSL evaluation, order both the MAX9263
EV kit and its companion board, the MAX9264 EV kit.
Features
S
Accepts 29-Bit Parallel Video and I
2
S Audio
S
On-Board S/PDIF-to-I
2
S Audio Converter
S
Windows XP-, Windows Vista-, and Windows
7-Compatible Software
S
USB-PC Connection (Cable Included)
S
USB Powered
S
Proven PCB Layout
S
Fully Assembled and Tested
Ordering Information
appears at end of data sheet.
Component List
DESIGNATION
C1–C7
C8–C14,
C101–C105,
C111, C121,
C131, C141,
C151,
C211–C214,
C221, C231,
C241, C251
C15, C16
QTY
7
DESCRIPTION
0.01FF
Q10%,
25V X7R ceramic
capacitors (0402)
Murata GRM155R71E103K
DESIGNATION
C108, C265,
C268
QTY
3
DESCRIPTION
1FF
Q10%,
16V X5R ceramic
capacitors (0603)
TDK C1608X5R1C105K
0.033FF
Q10%,
25V X7R
ceramic capacitor (0603)
Murata GRM188R71E333K
1FF
Q20%,
6.3V X5R ceramic
capacitors (0402)
TDK C1005X5R0J105M
0.01FF
Q5%,
25V C0G ceramic
capacitors (0603)
TDK C1608C0G1E103J
1000pF
Q10%,
50V X7R
ceramic capacitor (0805)
Murata GCM216R71H102K
0.022FF
Q10%,
25V X7R
ceramic capacitor (0402)
TDK C1005X7R1E223K
Not installed, ceramic capacitor
(0603)
72-pin (2 x 36) header
High-speed automotive
connector
Rosenberger D4S20F-40MA5-Z
C110
25
0.1FF
Q10%,
16V X7R ceramic
capacitors (0603)
TDK C1608X7R1C104K
1
C201, C202,
C203
C205, C206,
C232, C266,
C269
C207
3
2
0.22FF
Q10%,
50V X7R ceramic
capacitors (0805)
Murata GRM21BR71H224K
4.7FF
Q20%,
25V X7R ceramic
capacitors (1206)
Murata GCM31CR71E475M
10FF
Q20%,
16V X5R ceramic
capacitors (1206)
Murata GRM31CR61C106M
Not installed, ceramic
capacitors (1206)
22pF
Q5%,
50V C0G ceramic
capacitors (0603)
Murata GRM1885C1H220J
5
1
C21, C261
C22, C24, C25,
C26, C109,
C262, C264,
C267
C23, C263
C106, C107,
C122, C123
2
C208
8
1
C233
H1
J1
0
1
1
0
4
Windows, Windows XP, and Windows Vista are registered
trademarks of Microsoft Corp.
_________________________________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX9263 Evaluation Kit
Evaluates: MAX9263/MAX9264
Component List (continued)
DESIGNATION
J2, J3, J23
J10
J21
JU1–JU9, JU121,
JU122, JU151,
JU152
JU10, JU21,
JU22, JU23,
JU125, JU153,
JU154,
JU191–JU194,
JU210, JU261
JU101–JU108,
JU141–JU144,
JU211–JU214
L21, L22, L23,
L101, L261
L262
LED1, LED120,
LED127,
LED151–LED158
LED2, LED126
Q1, Q2
R1, R2
R3, R4
R5, R11, R12,
R111
R13
R14, R15, R123,
R126, R127,
R151–R158,
R203
R101, R102
R103
R104
R112, R122,
R211, R212
R121
R191, R192,
R201, R202
R205
QTY
0
1
1
13
DESCRIPTION
Not installed, SMA connectors
USB type-B right-angle female
receptacle
Phono jack
3-pin headers
DESIGNATION
R208
R233
SW1
SW122,
SW150–SW157,
SW221
U1
13
2-pin headers
U2
1
QTY
1
0
1
10
DESCRIPTION
3.01kI
Q1%
resistor (0603)
Not installed, resistor (0603)
Miniature SPDT toggle switch
Momentary pushbutton
switches (6mm)
GMSL serializer with HDCP
(64 TQFP-EP)
Maxim MAX9263GCB/V+
1.8V, 500mA LDO regulator
(8
FMAX
M
-EP)
Maxim MAX1792EUA18+
(Top Mark: AAAA)
UART-to-USB converter
(32 TQFP)
93C46-type 3-wire EEPROM
16-bit architecture
(8 SO)
Ultra-high-speed
microcontroller (44 TQFP)
Maxim DS89C450-ENL+
Quad three-state buffer (14 SO)
Fairchild 74AC125SC
Level translator (14 TSSOP)
Maxim MAX3378EEUD+
I
2
C I/O expander (24 QSOP)
Maxim MAX7324AEG+
Dual bidirectional level
translator (8 SOT23)
Maxim MAX3373EEKA+
(Top Mark: AAKS)
Digital audio receiver
(28 TSSOP)
16-bit dual-supply bus
transceiver (48 TSSOP)
Low-power dual-voltage
FP
supervisor (5 SC70)
Maxim MAX6736XKTGD3+
(Top Mark: AFS)
2:1 noninverting multiplexers
(6 SC70)
Fairchild NC7SV157P6X_NL
(Top Mark: VF7)
1
0
Not installed, 2-pin
headers—short (PC trace)
Ferrite beads (0603)
TDK MMZ1608R301A
3.3FH
Q10%
inductor (0805)
Murata LQM21NN3R3K10
Red LEDs (0805)
U10
1
5
1
U11
1
U12
1
11
2
2
2
2
4
1
U13
Green LEDs (0805)
n-channel MOSFETs (SOT23)
Central Semi 2N7002
45.3kI
Q1%
resistors (0603)
4.99kI
Q1%
resistors (0603)
2.2kI
Q5%
resistors (0603)
0I
Q5%
resistor (0603)
U20
U21
2
1
1
4
1
4
1
27I
Q5%
resistors (0603)
1.5kI
Q5%
resistor (0603)
470I
Q5%
resistor (0603)
10kI
Q5%
resistors (0603)
1.1kI
Q5%
resistor (0603)
4.7kI
Q5%
resistors (0603)
75kI
Q5%
resistor (0603)
U23, U24
U22
U19
U14
U15
1
1
1
1
14
1kI
Q5%
resistors (0603)
1
1
1
2
µMAX is a registered trademark of Maxim Integrated Products,
Inc.
_________________________________________________________________
Maxim Integrated Products
2
MAX9263 Evaluation Kit
Evaluates: MAX9263/MAX9264
Component List (continued)
DESIGNATION
U25
QTY
1
DESCRIPTION
Schmitt trigger buffer (5 SC70)
Fairchild NC7SV17P5X_NL
(Top Mark: V17)
3.3V, 500mA LDO regulator
(8
FMAX-EP)
Maxim MAX1792EUA33+
(Top Mark: AAAC)
6MHz crystal (HCM49)
Hong Kong X’tals
SSL60000N1HK188F0-0
DESIGNATION
Y12
QTY
1
DESCRIPTION
14.7456MHz crystal (HCM49)
Hong Kong X’tals
SSM14745N1HK188F0-0
12MHz, 3.3V low-jitter oscillator
(7mm x 5mm)
USB high-speed A-to-B cables,
6ft
Shunts
PCB: MAX9263 EVALUATION
KIT
Y23
—
—
—
1
1
24
1
U26
1
Y10
1
Component Suppliers
SUPPLIER
Central Semiconductor Corp.
Fairchild Semiconductor
Hong Kong X’tals Ltd.
Murata Electronics North America, Inc.
Rosenberger Hochfrequenztechnik GmbH
TDK Corp.
PHONE
631-435-1110
888-522-5372
852-35112388
770-436-1300
011-49-86 84-18-0
847-803-6100
WEBSITE
www.centralsemi.com
www.fairchildsemi.com
www.hongkongcrystal.com
www.murata-northamerica.com
www.rosenberger.de
www.component.tdk.com
Note:
Indicate that you are using the MAX9263 when contacting these component suppliers.
MAX9263 EV Kit Files
FILE
INSTALL.EXE
MAX9263.EXE
CDM20600.EXE
UNINSTALL.EXE
USB_Driver_Help_200.PDF
DESCRIPTION
Installs the EV kit files on your computer
Application program for both MAX9263 and MAX9264 devices
Installs the USB device driver
Uninstalls the EV kit software
USB driver installation help file
_________________________________________________________________
Maxim Integrated Products
3
MAX9263 Evaluation Kit
Evaluates: MAX9263/MAX9264
Quick Start
•
•
•
•
•
•
•
•
•
•
MAX9263 EV kit (USB cable included)
MAX9264 EV kit (USB cable included)
2m Rosenberger cable assembly (included with the
MAX9264 EV kit)
Parallel data source (such as digital video)
Optional: Function generator (needed only if parallel
data lacks a pixel clock)
Optional: Function generator (needed only if parallel
data lacks a VSYNC)
Optional: I
2
S or S/PDIF audio source
Optional: Pair of 8I speakers
Optional: 3.5mm stereo headphones (16I or greater)
User-supplied Windows XP, Windows Vista, or
Windows 7 PC with a spare USB port (direct 500mA
connection required; do not use a hub)
8)
9)
Required Equipment
7)
MAX9263 EV kit J21 phono jack, or connect an
I
2
S audio source to header H1 and remove jumper
JU210. Connect speakers to the MAX9264 EV kit
SPKR_L and SPKR_R oval pads, or plug head-
phones into the J206 headphone jack.
Connect the USB cable from the PC to the EV kit
board. A Windows message appears when con-
necting the EV kit board to the PC for the first time.
Each version of Windows has a slightly different mes-
sage. If you see a Windows message stating
ready
to use,
then proceed to the next step. Otherwise,
open the USB_Driver_Help_200.PDF document in
the Windows
Start | Programs
menu to verify that
the USB driver was installed successfully.
Verify that MAX9263 EV kit LED120 lights up, indicat-
ing that the microcontroller is powered and enabled.
Verify that MAX9264 EV kit LED120 lights up, indicat-
ing that the microcontroller is powered and enabled.
Note:
In the following sections, software-related items
are identified by bolding. Text in
bold
refers to items
directly from the EV kit software. Text in
bold and under-
lined
refers to items from the Windows operating system.
The EV kit is fully assembled and tested. Follow the steps
below to verify board operation:
1)
10) Verify that MAX9264 EV kit LED2 lights up, indicat-
ing that the link has been successfully established.
If LED2 is off or LED1 is on, double-check that the
PCLK_IN signal is clocking data.
11)
Optional Audio Demo:
If I
2
S or S/PDIF audio was pro-
vided to the MAX9263 EV kit, audio should now be
heard from the speakers or headphones previously
connected to the MAX9264 EV kit.
12) Start the MAX9263 EV kit software by opening its
icon in the
Start | Programs
menu. The EV kit soft-
ware configuration window appears, as shown in
Figure 8.
13) Press the
Connect
button and the configuration
window disappears.
14) The EV kit software main window appears, as shown
in Figure 1.
15) Press the
Read All
button to read all registers on
MAX9263 and MAX9264.
16)
I
2
C Slave Device Demo:
Make sure that the MAX9264
EV kit jumpers JU151–JU154 are in the 1-2 position.
17) In the software’s
MAX7324
tab sheet (Figure 4),
press the
Search for MAX7324
button. Verify that
the
MAX7324 Device Address
drop-down list shows
0xDA (JU151=1-2 JU152=1-2).
18) Press the
LED151-LED158 ON
button. Verify that
MAX9264 EV kit LED151–LED158 turn on.
19) Press the
LEDs Alternating
button. Verify that
MAX9264 EV kit LED151, LED153, LED156, and
LED158 turn off.
20)
GPIO Demo:
In the software’s
MAX9264
tab sheet
(Figure 3), scroll down to
Register 0x06.
Uncheck
GPIO1OUT
and press
Write.
Verify that MAX9264
EV kit LED4 turns off.
Procedure
Visit
www.maxim-ic.com/evkitsoftware
to down-
load the latest version of the EV kit software, 9263Rxx.
ZIP. Save the EV kit software to a temporary folder
and uncompress the ZIP file.
Install the EV kit software and USB driver on your
computer by running the INSTALL.EXE program
inside the temporary folder. The program files are
copied to your PC and icons are created in the
Windows
Start | Programs
menu. During software
installation, some versions of Windows may show
a warning message indicating that this software
is from an unknown publisher. This is not an error
condition and it is safe to proceed with installation.
Administrator privileges are required to install the
USB device driver on Windows.
Verify that all jumpers are in their default positions, as
shown in Table 1.
Connect the Rosenberger cable from the MAX9263 EV
kit J1 connector to the MAX9264 EV kit J1 connector.
Connect the parallel data source to MAX9263 head-
er H1 (if using static data without a pixel clock, use
external function generators to drive PCLK_IN and
VSYNC).
Optional Audio Demo:
Connect an S/PDIF audio
source (such as DVD player digital output) to the
2)
3)
4)
5)
6)
_________________________________________________________________
Maxim Integrated Products
4
MAX9263 Evaluation Kit
Evaluates: MAX9263/MAX9264
21) Uncheck
GPIO0OUT
and press
Write.
Verify that
MAX9264 EV kit LED3 turns off.
22) Check
GPIO1OUT
and press
Write.
Verify that
MAX9264 EV kit LED4 turns on.
23) Check
GPIO0OUT
and press
Write.
Verify that
MAX9264 EV kit LED3 turns on.
24)
INT Demo:
Toggle the MAX9264 EV kit switch SW2
up. Verify that MAX9263 EV kit LED1 turns on, indi-
cating that the MAX9264 INT input is asserted.
25) In the software’s
MAX9264
tab sheet, scroll to
Register 0x06
and press
Read.
Verify that
INT
is
checked, indicating that the MAX9264 INT input is
asserted.
26) Toggle the MAX9264 EV kit switch SW2 down. Verify
that MAX9263 EV kit LED1 turns off, indicating that
the MAX9264 INT input is not asserted.
27) In the software’s
MAX9264
tab sheet, scroll to
Register 0x06
and press
Read.
Verify that
INT
is not
checked, indicating that the MAX9264 INT input is
not asserted.
28)
HDCP Authentication Demo:
Raise the
HDCP
tab
sheet (Figure 7) and make sure that the
Link Check
drop-down list is set to
V00: No Link Check.
29) Make sure the encryption button says
Enable
Encryption
instead of
Disable Encryption.
30) In
Register 0x95
Actrl, check or uncheck
EN_INT_
COMP
to choose internal or external comparison
mode. Refer to the MAX9263/MAX9264 IC data
sheet for more information.
31) Press the
Authenticate
button. On success, the
green LED (LED126) turns on; otherwise, the red
LED (LED127) turns on.
32) Verify that the same R0 value is shown in
Register
0x85
on both the MAX9263 and the MAX9264.
33)
HDCP Encryption Demo:
Press the
Enable
Encryption
button. The Ri keys are updated approx-
imately every 2s, assuming that the VSYNC input
rate is 60Hz. The GUI polls the Ri and Pj registers if
their corresponding
Poll this register
checkbox is
checked.
34) In the
Link Check
drop-down list, select
V80: Every
128 VSYNCs.
35) The firmware performs the link integrity check after
every 128 VSYNC pulses, turning off the green LED
(LED126) if the link check fails.
36) In the
Link Check
drop-down list, select
V10: Every
16 VSYNCs.
37) The firmware performs the advanced link integrity
check after every 16 VSYNC pulses, turning off the
green LED (LED126) if the link check fails.
•
•
•
•
•
•
•
Quick Start for Repeater
Demonstration
5V DC, 1000mA power supply
Required Equipment
Digital video source (or two function generators, to
drive PCLK and VSYNC)
Digital video display
Two MAX9263 EV kit boards
Two MAX9264 EV kit boards
Two Rosenberger cables (included with the MAX9264
EV kit boards)
Wires to interconnect the boards
•
•
1)
User-supplied Windows PC with available USB port
Optional Equipment for Software
Verification
USB A-to-B cable (included with the MAX9263 EV kit)
Label the boards for reference. Refer to the
Example
Repeater Network—Two
µCs
section in the MAX9263/
MAX9264 IC data sheet.
1.1) Designate one of the MAX9263 EV kit boards
as Board #1 TX_B1.
1.2) Designate one of the MAX9264 EV kit boards
as Board #2 RX_R1.
1.3) Designate the other MAX9263 EV kit board as
Board #3 TX_R1.
1.4) Designate the other MAX9264 EV kit board as
Board #4 RX_D1.
2) Prepare the bulkhead MAX9263 EV kit TX_B1.
2.1) Update Board #1 TX_B1 firmware:
2.1.1)
Start
|
Programs
|
Maxim EVKIT
Software
|
MAX9263
|
Repeater
Firmware
|
MAX9263EVKIT Bulkhead_
UC_B Firmware Update.
2.1.2) The firmware update batch file instructs
you to
Plug USB cable into Maxim
Evaluation Kit to begin firmware
update...
and
Press any key to con-
tinue...
After plugging in the USB cable,
wait at least 5s to allow Windows to catch
up. Press the Enter key to begin the firm-
ware update. After approximately 1min,
verify that the batch file reports
Exit code
= 0 EXIT_CODE_SUCCESS.
2.1.3)
Diagnostic:
Windows reports
USB over
current surge.
Check if the USB connec-
tor is the type that has a separate back
shield that can short across the USB sig-
nal pins. Pry off this back shield cover to
clear the short.
Procedure
_________________________________________________________________
Maxim Integrated Products
5
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
