REVISION DH
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 2 LB.
3. FOR NON -LC & -A, USE 2TS-XX-D.
No OF POSITIONS
4. COPLANARITY TO INCLUDE INSULATOR.
5. MAX BURR ALLOWANCE: .002[0.05].
-02 THRU -50 (PER ROW)
6. MAXIMUM CUT FLASH: .015[0.38]. (NO FLASH TO BE ON BOTTOM OF BODY).
7. -MT OPTION: PIN B TO BE FLUSH TO +/- .003" A LINE MADE BY THE BODY
LEAD STYLE
-DH OPTION: PIN A TO BE FLUSH TO .003" ABOVE A LINE MADE BY THE BODY
-01: .126 [3.20] POST
PIN B TO BE FLUSH TO .001" BELOW/.003" ABOVE A LINE MADE BY THE BODY
-SH OPTION: PIN A TO BE FLUSH TO +/- .003" A LINE MADE BY THE BODY.
-02: .175 [4.45] POST
(SEE TABLE 2)
C
8. ORIENTATE PINS TO REDUCE THE NUMBER OF BANDOLIER MARKS IN THE
POST AREA. (SEE TABLE 4)
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED. THE -LC
PLATING SPECIFICATION
OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC
-H: 30µ" HEAVY GOLD IN CONTACT AREA, 3µ" ON TAIL
RECOMMENDS MANUAL PLACEMENTFOR ALL ASSEMBLIES WITH
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
THE -LC OPTION.
MATTE IN ON TAIL
10. NOTE DELETED.
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
OPTION
-TR: TAPE AND REEL
(37 POSTION MAX)
(SEE SHT 5)
OPTION
-P: PICK & PLACE PAD
(USE PPP-13)
(2 POSITION MINIMUM)
OPTION
-XXX: POLARIZED POSITION
-XXX SPECIFIES POSITION OMITTED
(SEE POLARIZATION VIEW)
OPTION
(SEE NOTE 3)
-LC: LOCKING CLIP (SEE NOTE 9)
(FOR -DH USE 2TS-XX-DH-LC-XX)
(FOR -SH USE 2TS-XX-SH)
(NOT AVAILABLE WITH -A)
-A: ALIGNMENT PIN
(FOR -DH USE 2TS-XX-DH-A-XX)
(FOR -SH USE 2TS-XX-SH-A-XX)
(NOT AVAILABLE WITH -LC)
-K: POLYIMIDE FILM PAD (SEE FIG 14, SHT 6)
(3 POS. MIN)
(USE K-DOT-.177-.281-.005)
ROW OPTION
-SH: SINGLE (2TS-XX-SH-X-XX)
-DH: DOUBLE (2TS-XX-DH-XX-XX)
-MT: MIXED TECHNOLOGY (2TS-XX-DH-XX-XX)
(NOT AVAILABLE WITH -LC, OR -A OPTIONS)
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-T: MATTE TIN CONTACT AND TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-TM: MATTE TIN CONTACT AND TAIL
(NO. OF POS x .07874[2.0000])
+.005 [0.13]
- .010 [0.25]
(NO OF POS - 1) x .07874[2.0000])
.003[0.08]
2 MAX SWAY
(EITHER DIRECTION)
.15748 4.0000
REF
2TS-XX-DH-XX-XX
01
.055 1.40
02
.0787 2.000
SEE NOTE 6
LC-06-TM
"C"
(SEE TABLE 2)
.0197 0.500 SQ
(TYP) REF
.11 2.8
.245±.010 6.22±0.254
SEE NOTE 5
C
0
3°
C
.003 0.08 MAX
(SEE NOTE 7)
SEE TABLE 5
(SEE NOTE 4)
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
*
PROPRIETARY NOTE
*
SEE NOTE 5
(NO. OF POS x .07874[2.0000]
- .15748[4.0000]) .003[0.08]
.XX: .01 [.3]
5
.XXX: .005 [.13]
.XXXX: .0020 [.051]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SMATEC.com
code 55322
DESCRIPTION:
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
MMT-108-01-X-DH-LC SHOWN
FIG 1
INSULATOR: LCP VECTRA;
UL 94 V0;
COLOR: BLACK
TERMINAL: PHOS BRONZE
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
DWG. NO.
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
12/12/2000
SHEET
1
OF
6
BY:
DEAN P
REVISION DH
.07874 2.0000 REF
2TS-XX-SH-X
.043 1.09
REF
01
SEE NOTE 6
2 MAX SWAY
(EITHER DIRECTION)
"C"
(SEE TABLE 2, SHT 1)
.07874 2.000 REF
.11 2.8
.060 1.52 REF
.050 1.27 REF
(NO. OF POS x .07874[2.0000]
- .15748[4.0000]) .003[0.08]
5°
C
0
C
.006[0.15]
(SEE NOTE 4)
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
*
PROPRIETARY NOTE
*
MMT-108-01-X-SH-A SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FIG 2
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
DWG. NO.
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
12/12/2000
SHEET
2
OF
6
BY:
DEAN P
REVISION DH
C
L
50
01
90°
.050 1.27
02
01
36/100
35/99
.100±.010 2.53±0.25
-MT: MIXED TECHNOLOGY
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FIG 3
POLARIZATION VIEW
FIG 4
((NO. OF POS. X .07874 [2.000])/2 - "E")
.010[0.25]
"E"
PIN A (-DH)
.300 7.62 REF
.157 4.00
PPP-13
.250 6.35
REF
PIN A (-SH)
PPP-13
-SH
C
L
-P: PICK & PLACE PAD OPTION
-DH
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
FIG 5
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SMATEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
DWG. NO.
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
12/12/2000
SHEET
3
OF
6
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
BY:
DEAN P
REVISION DH
90°
"C"
(SEE TABLE 2, SHT 1)
"C"
(SEE TABLE 2, SHT 1)
"C"
(SEE TABLE 2, SHT 1)
.11 2.8
.050 1.27
.100 2.53
"D"
(SEE TABLE 2, SHT 1)
"D"
(SEE TABLE 2, SHT 1)
.113 2.87
-MT
-SH
-DH & MT
-DH
-MT
IN-PROCESS 1
FIG 6
IN-PROCESS 2
FIG 7
-DH
IN-PROCESS 3
"D"
(SEE TABLE 2, SHT 1)
"D"
(SEE TABLE 2, SHT 1)
.295 7.49
.295 7.49
FIG 8
-DH
-DH
-MT
IN-PROCESS 4
FIG 9
-MT
IN-PROCESS 5
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
FIG 10
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SMATEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
DWG. NO.
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
12/12/2000
SHEET
4
OF
6
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
BY:
DEAN P
REVISION DH
-TR TAPE AND REEL VIEW
(DRAWING NOT DETAILED)
FIG 12
POST TO RIGHT
ROUND HOLES
.245 6.22
.245 6.22
OBLONG HOLES
USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
NOTE: PARTS MUST BE ORIENTED PER THE DESIGN OF THE POCKET TOOL.
POCKETS DESIGNED AFTER REVISION BW MUST ORIENT PARTS PER THIS VIEW.
-DH
-MT
IN-PROCESS 6
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
FIG 11
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SMATEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
DWG. NO.
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
12/12/2000
SHEET
5
OF
6
BY:
DEAN P
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
