VM810C EVE2 CREDIT CARD MODULE
Document No.: FT_001225 Clearance No.: FTDI#464
Version 1.1
FTDI Chip
VM810C Datasheet
Embedded Video Engine
Credit Card Board
General Purpose Multi Media Controller
1 Introduction
The VM810C is a development module for
FTDI’s FT810, which is used to develop and
demonstrate the functionality of the FT810
Embedded Video Engine, EVE. This module
behaves as an SPI slave, and requires a SPI
Master for proper micro-controller interfacing
and system integration.
VM810C modules support 5.0” LCD panel
size options. Users can also connect to
different LCD screens as long as they meet
the FT810 technical specification and fit the
VM810C LCD connector.
VM810C50A-D,
3.3/5V
micro-
controller adaptor card with 5.0” LCD
VM810C50A-N,
3.3/5V
micro-
controller adaptor card, with 4.3/5.0”
LCD connector but no display
1.1 Features
The VM810C utilises the FTDI FT810
Embedded Video Engine. Graphic, audio and
touch features of the FT810 can be accessed
with the VM810C. For a full list of the FT810’s
features please see the FT810 datasheet.
The VM810C has the following features:
Ready to use LCD module
Options with or without 5” LCDs supporting
resistive touch with pressure sensing
On board LCD backlight LED Driver
Supports mono audio output
On board audio power amplifier and micro
speaker
Flexible power supply. Powering the
VM810C using SPI host connector, or via
USB Micro-B port, or via a 2.0mm JST
connector
5 V tolerant buffers when used with a 5V
SPI Master.
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or
reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its
documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made
or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result
of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use
in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in
personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to
use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices
International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered
Company Number: SC136640
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 CREDIT CARD MODULE
Version 1.1
Document No.: FT_001225 Clearance No.: FTDI#464
2 Ordering Information
Note that the kits below require a 5V/1A power supply. It is NOT provided in the development kit, but is
offered as an optional accessory, as is the USB to SPI cable, with the following part types:
Part No.
VM810C50A-N
Description
Credit Card Size VM810C module, supports 3.3/5v MCU Adapter
Board, with FPC/FFC 40 LCD connector. No display is provided.
Credit Card Size VM810C module, supports 3.3/5v MCU Adapter
Board, with FPC/FFC 40 LCD connector. Includes 5 inch 800x480 TFT
LCD display with resistive touch panel.
Accessory - UK Model 5V/1A USB Power Supply
(Mfr # JX-B0520C-1-B)
Accessory - US Model 5V/1A USB Power Supply
(Mfr # JX-B0520B-1-B)
Accessory - EU Model 5V/1A USB Power Supply
(Mfr # JX-B0520A-1-B)
Accessory - High Speed Micro USB to SPI adapter for BASIC boards
based on FT232H MPSSE design
Accessory - Flat USB A to Micro B Cable 1M- Black and White
Accessory - Flat USB A to Micro B Cable 1M- Blue and White
Accessory - Resistive Touch Screen Pen Stylus
VM810C50A-D
VA-PSU-UK1
VA-PSU-US1
VA-PSU-EU1
VA800A-SPI
VA-FC-1M-BKW
VA-FC-1M-BLW
VA-FC-STYLUS1
Table 2-1 – Ordering information
2
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 CREDIT CARD MODULE
Version 1.1
Document No.: FT_001225 Clearance No.: FTDI#464
Table of Contents
1
2
3
Introduction .................................................................... 1
1.1 Features ...................................................................................... 1
Ordering Information ...................................................... 2
Hardware Description ..................................................... 4
3.1
3.2
VM810C board ........................................................................... 4
Physical Descriptions ................................................................ 5
3.2.1 PCB layout ................................................................................................................... 5
3.2.2 VM810C Connectors ...................................................................................................... 6
4
5
Board Schematics ............................................................ 9
Hardware Setup Guide .................................................. 12
5.1
5.2
5.3
Power Configuration ............................................................... 12
Backlight LED current Configuration ....................................... 12
MPSSE Setup ........................................................................... 12
6
7
8
Mechanical Dimensions ................................................. 15
Specifications ................................................................ 16
7.1
Optical Specification ............................................................... 16
Contact Information ...................................................... 17
Document References ..................................................................... 17
Acronyms and Abbreviations ........................................................... 17
Appendix A – References ................................................... 17
Appendix B - List of Figures and Tables ............................. 18
List of Figures ................................................................................. 18
List of Tables ................................................................................... 18
Appendix C – Revision History ........................................... 19
3
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 CREDIT CARD MODULE
Version 1.1
Document No.: FT_001225 Clearance No.: FTDI#464
3 Hardware Description
Please refer to section
0
for connector settings. Some VM810C jumpers must be set to work properly
with your system.
3.1 VM810C board
Figure 3-1 – VM810C board top view
The VM810C module is intended for direct use into existing applications that require a display. This
module is suitable for interfacing with an external microcontroller that has a SPI Master channel.
The main functions of the VM810C are as follows:
Micro USB, SPI connector or 2-pin connector for power supply
3.3V regulator : Takes 5V input and outputs 3.3V for on-board circuits
WVGA(800x480) TFT LCD touch screen panel (for the VM810C50A-D module)
LCD backlight driver. On board back light driver has over voltage protection (OVP) of 34V, and
drive current 60mA.
5V tolerant buffers between the SPI master interface and the Slave interface of the FT810
o
SPI timing requirements can be referenced in the FT810 datasheet. The on board level
converter buffers introduce additional delay. The actual maximum SPI clock frequency
depends on the host system timing and connection cable length to the VM810C.
3 stage audio filter and power amplifier
8Ω speaker
Audio line out option
4
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 CREDIT CARD MODULE
Version 1.1
Document No.: FT_001225 Clearance No.: FTDI#464
3.2 Physical Descriptions
3.2.1 PCB layout
The VM810C is an 85.6mm x 54.1mm, four-layer printed circuit board. Board thickness is
approximately 1.6mm.
Figure 3-2 – VM810C board top layer
Figure 3-3 – VM810C board bottom layer
5
Copyright © 2015 Future Technology Devices International Limited
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
