Microcomputer Components
8-Bit CMOS Microcontroller
C517A
Data Sheet 10.97
C517A Data Sheet
Revision History:
Previous Version:
Page
Page
(in previous (in current
Version)
Version)
Current Version: 10.97
none
Subjects (major changes since last revision)
Edition 10.97
Published by Siemens AG,
Bereich Halbleiter, Marketing-
Kommunikation, Balanstraße 73,
81541 München
©
Siemens AG 1997.
All Rights Reserved.
Attention please!
As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes
and circuits implemented within components or assemblies.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or the Siemens Companies
and Representatives worldwide (see address list).
Due to technical requirements components may contain dangerous substances. For information on the types in question please contact
your nearest Siemens Office, Semiconductor Group.
Siemens AG is an approved CECC manufacturer.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we
will take packing material back, if it is sorted. You must bear the costs of transport.
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs in-
curred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components
1
of the Semiconductor Group of Siemens AG, may only be used in life-support devices or systems
2
with the express
written approval of the Semiconductor Group of Siemens AG.
1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the
failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain hu-
man life. If they fail, it is reasonable to assume that the health of the user may be endangered.
8-Bit CMOS Microcontroller
C517A
Advance Information
•
•
•
•
•
•
•
•
•
•
Full upward compatibility with SAB 80C517A/83C517A-5
Up to 24 MHz external operating frequency
– 500 ns instruction cycle at 24 MHz operation
Superset of the 8051 architecture with 8 datapointers
On-chip emulation support logic (Enhanced Hooks Technology
TM
)
32K byte on-chip ROM (with optional ROM protection)
– alternatively up to 64K byte external program memory
Up to 64K byte external data memory
256 byte on-chip RAM
Additional 2K byte on-chip RAM (XRAM)
Seven 8-bit parallel I/O ports
Two input ports for analog/digital input
(further features are on next page)
On-Chip Emulation Support Module
Oscillator
Watchdog
Watchdog
Timer
T0
T2
T1
10-Bit
A/D Converter
XRAM
2K x 8
RAM
256 x 8
Port 0
Port 1
I/O
I/O
I/O
I/O
I/O
Power
Saving
Modes
CCU
Compare
Timer
CPU
(8 Datapointer)
MDU
Port 2
ROM
32k x 8
Port 8
Port 7
Port 6
Port 5
Port 3
Port 4
8 Bit
USART
8 Bit
UART
Analog/ Analog/
Digital Digital
Input
Input
I/O
I/O
MCA03317
Figure 1
C517A Functional Units
Semiconductor Group
3
1997-10-01
C517A
Features
(cont’d):
•
•
•
•
•
•
•
•
•
Two full duplex serial interfaces (USART)
– 4 operating modes, fixed or variable baud rates
– programmable baud rate generators
Four 16-bit timer/counters
– Timer 0 / 1 (C501 compatible)
– Timer 2 for 16-bit reload, compare, or capture functions
– Compare timer for compare/capture functions
Powerful 16-bit compare/capture unit (CCU) with up to 21 high-speed or PWM output channels
and 5 capture inputs
10-bit A/D converter
– 12 multiplexed analog inputs
– Built-in self calibration
Extended watchdog facilities
– 15-bit programmable watchdog timer
– Oscillator watchdog
Power saving modes
– Slow down mode
– Idle mode (can be combined with slow down mode)
– Software power-down mode
– Hardware power-down mode
17 interrupt sources (7 external, 10 internal) selectable at 4 priority levels
P-MQFP-100 packages
Temperature Ranges: SAB-C517A
T
A
= 0 to 70
°C
SAF-C517A
T
A
= -40 to 85
°C
SAH-C517A
T
A
= -40 to 110
°C
Table 1
Ordering Information
Type
SAB-C517A-4RM
SAF-C517A-4RM
Ordering Code
Q67120-DXXXX
Q67120-DXXXX
Package
Description
(8-Bit CMOS microcontroller)
P-MQFP-100-2 with mask programmable ROM
(18 MHz)
P-MQFP-100-2 with mask programmable ROM
(18 MHz) ext. temp. – 40
°C
to 85
°C
P-MQFP-100-2 with mask programmable ROM
(24 MHz)
P-MQFP-100-2 with mask programmable ROM
(24 MHz) ext. temp. – 40
°C
to 85
°C
P-MQFP-100-2 for external memory (18 MHz)
P-MQFP-100-2 for external memory (18 MHz)
ext. temp. – 40
°C
to 85
°C
P-MQFP-100-2 for external memory (24 MHz)
SAB-C517A-4R24M Q67120-DXXXX
SAF-C517A-4R24M Q67120-DXXXX
SAB-C517A-LM
SAF-C517A-LM
SAB-C517A-L24M
Q67127-C1071
Q67127-C1063
Q67127-C1072
Semiconductor Group
4
1997-10-01
C517A
Note:
Versions for extended temperature ranges – 40
°C
to 110
°C
(SAH-C517A) are available on
request. The ordering number of ROM types (DXXXX extensions) is defined after program
release (verification) of the customer.
V
CC
V
SS
Port 7
8-bit Analog/
Digital Input
Port 8
4-bit Analog/
Digital Input
XTAL1
XTAL2
ALE
PSEN
EA
RESET
PE/SWD
OWE
RO
HWPD
Port 0
8-Bit Digital I/O
Port 1
8-Bit Digital I/O
Port 2
8-Bit Digital I/O
C517A
Port 3
8-Bit Digital I/O
Port 4
8-Bit Digital I/O
Port 5
8-Bit Digital I/O
Port 6
8-Bit Digital I/O
V
AREF
V
AGND
MCL03318
Figure 2
Logic Symbol
Additional Literature
For further information about the C517A the following literature is available:
Title
C517A 8-Bit CMOS Microcontroller User’s Manual
C500 Microcontroller Family
Architecture and Instruction Set User’s Manual
C500 Microcontroller Family - Pocket Guide
Ordering Number
B158-H7053-X-X-7600
B158-H6987-X-X-7600
B158-H6986-X-X-7600
Semiconductor Group
5
1997-10-01