Datasheet> 器件分类 > 无源元件> 1061A

文档预览

1061A: 产品描述CAPACITOR, VARIABLE, CERAMIC, 250 V, 12 pF - 100 pF, VERTICAL ADJUSTER, THROUGH HOLE MOUNT; 产品类别无源元件; 文件大小1MB，共22页; 制造商ETC2

下载文档详细参数全文预览

1061A概述

CAPACITOR, VARIABLE, CERAMIC, 250 V, 12 pF - 100 pF, VERTICAL ADJUSTER, THROUGH HOLE MOUNT

电容, 可变的, 陶瓷, 250 V, 12 pF - 100 pF, 垂直调节器, 通孔安装

1061A规格参数

参数名称	属性值
额定直流电压urdc	250 V
状态	CONSULT MFR
安装特点	THROUGH HOLE MOUNT
制造商系列	9300
多圈	Yes
电容类型	VARIABLE
端子形状	FLAT
最大电容	100 pF
最小电容	12 pF
电介质材料	CERAMIC
调节方向	VERTICAL

文档预览

下载PDF文档

全文
预览

INDUSTRIAL AUTOMATION

PROCESS

CONTROL

CABLES

18.41

UL Instrumentation Cable

300V Power-Limited Tray Cables — Overview

Construction

Soft annealed bare or tinned copper with

PVC flame retardant insulation and jacket.

Other insulation and jacket options are

available (see table below). Communication

wire included on all multi-pair/multi-triad

1000 and 3000 series part numbers, 22 AWG

(7x30) bare copper, orange PVC insulation.

Nylon rip cord included in all PVC/PVC

instrumentation cables.

Other Construction Options:

UL Listed for PLTC

Insulation/Jacket

XLPE/PVC

XLPE/CPE

PVC/PVC

PVC/CPE

PE/PVC

FPE/PVC

TPE/TPE

XLPE/Haloarrest

Application

Cable jackets are resistant to sunlight,

moisture and vapor penetration. PVC/PVC

constructions, with 3 conductors or more

and 20 AWG or larger, are suitable for

direct burial.

Unshielded

Twisted non-shielded pairs and triads

provide a minimal OD allowing greater tray

and conduit fill. Non-shielded instrument

pairs may be utilized when recommended

by the instrument manufacturer and used

in a metallic conduit.

Overall Shield

Recommended for use in instrumentation

applications where signals are transmitted

in excess of 100 millivolts except in areas

where high voltage and current sources

create excessive noise interference.

The Beldfoil

shield with drain wire

provides 100% coverage for maximum

shield effectiveness.

Individually Shielded and

Overall Shielded

Specifications

●

UL Subject 13

UL Subject 2250

NEC Article 725 Class 2 and

Class 3 Circuits

NEC Type PLTC Listed, which is

approved for cable tray use in Class 1,

Division 2, hazardous areas and

non-hazardous areas, cable trays,

raceways, conduit and supported

by messenger wires.

Sunlight-resistant.

Oil-resistant per UL Class 43

NEC Type ITC per Article 727.

ITC cables may carry up to 5 amps

at 150V, which is significantly greater

than that allowed for PLTC only cables.

ITC cables may also be installed in

specific applications, per the NEC,

in addition to those allowed for PLTC.

UL 1685 (UL 1581) Vertical Tray Flame

Test comparable to IEEE 383-1974

(70,000 BTU/hr.) Flame Test.

PVC/PVC constructions are CMG, FT4,

IEEE 1202 and IEEE 383-2003 rated,

and meet ICEA T-29-520 Flame Test.

Design options — call 1-800-BELDEN-1

or 1-800-BELDEN-3.

●

Max. Temp Rating

90°C

105°C

75°C

105°C

90°C

●

Armoring Capabilities

Belden also has the capability to protect

electronic, instrumentation and control cables

with interlocking or continuous armor and

smooth or corrugated protective metal tapes.

To Specify Part Number

●

3456

Core

Trade

Number

Overall Armor

Jacket Type

Type

Individually shielded pairs or triads with

an overall shield are recommended for

use in instrumentation applications where

optimum noise rejection is required.

Individual pair/triad shields are fully isolated

from each other and contain a separate

drain wire for grounding, to provide

maximum protection from crosstalk and

common mode interference. Cables with

an overall shield provide additional

electrostatic noise protection.

●

PLTC-ER

As an option, Belden offers all PVC insulated,

PVC jacketed instrumentation cables, and

several other insulation and jackets, with a

PLTC-ER (Exposed Run) rating, formerly

referred to as Open Wiring.

Per NEC Article 725, a PLTC-ER rated cable

may be installed in an industrial establish-

ment between a cable tray and the utilization

equipment or device. A PLTC-ER rated cable

must meet the crush and impact require-

ments of UL Type MC cable By eliminating

the need for metal conduit and/or armor,

using a PLTC-ER rated cable results in

savings in both installation and maintenance.

Overall Jacket

Code

Armor

Code

Material

Aluminum Interlock

Steel Interlock

Continuously Corrugated Aluminum

Material

PVC

CPE

TPE

HDPE

Oil Res II

Haloarrest

Standard lengths may be subject to tolerance. Custom lengths may be available upon

request. Contact the Belden Electronics Division Customer Service Department for

additional information. 1-800-BELDEN-1 or 1-800-BELDEN-3.

F o r m o r e i n f o r m a t i o n , c o n t a c t

B e l d e n Te c h n i c a l S u p p o r t :

1 - 8 0 0 - B E L D E N - 1

• w w w . b e l d e n . c o m

•

Industrial Cables

1061A

1061A概述

1061A规格参数

文档预览

推荐资源