INTEGRATED CIRCUITS
NE/SA/SE532
LM258/358/A/2904
Low power dual operational amplifiers
Product data
Supersedes data of 2002 Jan 22
2002 Jul 12
Philips
Semiconductors
Philips Semiconductors
Product data
Low power dual operational amplifiers
NE/SA/SE532/
LM258/358/A/2904
DESCRIPTION
The 532/358/LM2904 consists of two independent, high gain,
internally frequency-compensated operational amplifiers internally
frequency-compensated operational amplifiers designed specifically
to operate from a single power supply over a wide range of voltages.
Operation from dual power supplies is also possible, and the low
power supply current drain is independent of the magnitude of the
power supply voltage.
PIN CONFIGURATION
D, DP, and N Packages
OUTPUT A
INVERTING INPUT A
NON INVERTING INPUT A
V–
1
2
3
4
A
–+
B
+–
8
7
6
5
V+
OUTPUT B
INVERTING INPUT B
NON INVERTING INPUT B
UNIQUE FEATURES
In the linear mode the input common-mode voltage range includes
ground and the output voltage can also swing to includes ground
and the output voltage can also swing to ground, even though
operated from only a single power supply voltage. The unity gain
cross frequency is temperature-compensated. The input bias current
is also temperature-compensated.
SL00282
Figure 1. Pin configuration.
FEATURES
•
Internally frequency-compensated for unity gain
•
Large DC voltage gain: 100 dB
•
Wide bandwidth (unity gain): 1 MHz (temperature-compensated)
•
Wide power supply range single supply: 3 V
DC
to 30 V
DC
,
•
Very low supply current drain (400
µA)—essentially
independent
•
Low input biasing current: 45 nA
DC
temperature-compensated
•
Low input offset voltage: 2 mV
DC
, and offset current: 5nA
DC
•
Differential input voltage range equal to the power supply voltage
•
Large output voltage: 0 V
DC
to V+ 1.5 V
DC
swing
EQUIVALENT CIRCUIT
V+
6
µA
100
µ
A
6
µ
A
Q5
Q6
C
C
Q7
or dual supplies:
±1.5
V
DC
to
±15
V
DC
of supply voltage (1 mW/op amp at +5 V
DC
)
Q2
Q1
Q3
Q4
R
SC
OUTPUT
–
INPUTS
Q11
+
Q10
Q8
Q9
Q12
Q13
50
µA
SL00283
Figure 2. Equivalent circuit.
2002 Jul 12
2
853-1241 28616
Philips Semiconductors
Product data
Low power dual operational amplifiers
NE/SA/SE532/
LM258/358/A/2904
ORDERING INFORMATION
DESCRIPTION
8-Pin Plastic Small Outline (SO) Package
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline (SO) Package
8-Pin Plastic Small Outline (SO) Package
8-Pin Plastic Thin Shrink Small Outline Package (TSSOP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline (SO) Package
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline (SO) Package
8-Pin Plastic Thin Shrink Small Outline Package (TSSOP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline (SO) Package
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Dual In-Line Package (DIP)
TEMPERATURE RANGE
0
°C
to +70
°C
0
°C
to +70
°C
–40
°C
to +85
°C
–40
°C
to +125
°C
–40
°C
to +125
°C
–40
°C
to +125
°C
–25
°C
to +125
°C
–25
°C
to +125
°C
0
°C
to +70
°C
0
°C
to +70
°C
0
°C
to +70
°C
0
°C
to +70
°C
0
°C
to +70
°C
–55
°C
to +125
°C
ORDER CODE
NE532D
NE532N
SA532D
LM2904D
LM2904DP
LM2904N
LM258D
LM258N
LM358D
LM358DP
LM358N
LM358AD
LM358AN
SE532N
DWG #
SOT96-1
SOT97-1
SOT96-1
SOT96-1
SOT505-1
SOT97-1
SOT96-1
SOT97-1
SOT96-1
SOT505-1
SOT97-1
SOT96-1
SOT97-1
SOT97-1
ABSOLUTE MAXIMUM RATINGS
SYMBOL
V
S
V
IN
Supply voltage, V+
Differential input voltage
Input voltage
Maximum power dissipation
T
amb
= 25
°C
(Still air)
1
N package
D package
DP package
Output short-circuit to GND
2
V+ < 15 V
DC
and T
amb
= 25
°C
Operating ambient temperature range
NE532/LM358/LM358A
LM258
LM2904
SA532
SE532
Storage temperature range
Lead soldering temperature (10 sec max)
PARAMETER
RATING
32 or
±16
32
–0.3 to +32
UNIT
V
DC
V
DC
V
DC
P
D
1160
780
714
Continuous
0 to +70
–25 to +85
–40 to +125
–40 to +85
–55 to +125
–65 to +150
230
mW
mW
mW
T
amb
°C
°C
°C
°C
°C
°C
°C
T
stg
T
sld
NOTE:
1. Derate above 25
°C,
at the following rates:
N package at 9.3 mW/°C
D package at 6.2 mW/°C
DP package at 5.72 mW/°C
2. Short-circuits from the output to V+ can cause excessive heating and eventual destruction. The maximum output current is approximately
40 mA independent of the magnitude of V+. At values of supply voltage in excess of +15 V
DC
, continuous short-circuits can exceed the
power dissipation ratings and cause eventual destruction.
2002 Jul 12
3
Philips Semiconductors
Product data
Low power dual operational amplifiers
NE/SA/SE532/
LM258/358/A/2904
DC ELECTRICAL CHARACTERISTICS
T
amb
= 25
°C;
V+ = +5 V, unless otherwise specified.
SYMBOL
PARAMETER
TEST CONDITIONS
R
S
= 0
Ω
R
S
= 0
Ω;
over temp.
R
S
= 0
Ω;
over temp.
I
IN(+)
– I
IN(–)
Over temp.
Over temp.
I
IN(+)
or I
IN(–)
I
IN(+)
or I
IN(–)
; Over temp.
Over temp.
V+ = 30 V
V+ = 30 V; Over temp.
V+ = 30 V
R
L
≥
2 kΩ; V+ = 30 V; over temp.
R
L
≥
10 kΩ; V+ = 30 V; over temp.
R
L
≥
10 kΩ; over temp.
R
L
=
∞;
V+ = 30 V
I
CC
Supply current
R
L
=∞ on all amplifiers; V+ = 30 V;
over temp.
R
L
≥
2 kΩ; V
OUT
±10
V
A
VOL
Large-signal voltage gain
Supply voltage rejection
ratio
Amplifier-to-amplifier
coupling
4
V+=15V (for large V
O
swing);
over temp.
R
S
= 0
Ω
f = 1 kHz to 20 kHz (input referred)
V
IN+
= +1 V
DC
; V
IN–
= 0 V
DC
;
V+ = 15 V
DC
V
IN+
= +1 V
DC
; V
IN–
= 0 V
DC
;
V+ = 15 V
DC
; over temp.
V
IN–
= +1 V
DC
; V
IN+
= 0 V
DC
;
V+ = 15 V
DC
Output current (Sink)
V
IN–
= +1 V
DC
; V
IN+
= 0 V
DC
;
V+ = 15 V
DC
; over temp.
V
IN+
= 0 V; V
IN–
= +1 V
DC
;
V
O
= 200 mV
I
SC
GBW
SR
V
NOISE
Short circuit current
5
Differential input voltage
6
Unity gain bandwidth
Slew rate
Input noise voltage
T
amb
= 25
°C
T
amb
= 25
°C
T
amb
= 25
°C;
f = 1 kHz
1
0.3
40
20
10
10
5
12
50
25
65
100
–120
40
20
20
8
50
40
60
V+
1
0.3
40
20
10
10
5
12
0
0
70
26
27
28
5
0.5
0.6
100
20
1.0
1.2
25
15
65
100
–120
40
20
20
8
50
40
60
V+
85
10
45
40
50
V+–1.5
V+–2.0
0
0
65
26
27
28
5
0.5
0.6
100
20
1.0
1.2
70
150
300
7
±3
±30
±100
10
45
40
50
V+–1.5
V+–2.0
250
500
SE532, LM258
Min
V
OS
V
OS
I
OS
I
OS
I
BIAS
S
I
B
V
C
CM
CMRR
V
O
OH
V
OL
Offset voltage
1
Drift
Offset current
Drift
Input current
2
Drift
Common-mode voltage
g
3
range
Common-mode rejection
ratio
Output voltage swing
Output voltage swing
Typ
±2
Max
±5
±7
7
±5
±50
±150
NE/SA532/
LM358/LM2904
Min
Typ
±2
Max
±7
±9
mV
mV
µV/°C
nA
nA
pA/°C
nA
nA
pA/°C
V
V
dB
V
V
mV
mA
mA
V/mV
V/mV
dB
dB
mA
mA
mA
mA
µA
mA
V
MHz
V/µs
nV/√Hz
UNIT
PSRR
Output current (Source)
I
OUT
(Notes on next page).
2002 Jul 12
4
Philips Semiconductors
Product data
Low power dual operational amplifiers
NE/SA/SE532/
LM258/358/A/2904
DC ELECTRICAL CHARACTERISTICS
(continued)
T
amb
= 25
°C;
V+ = +5 V; unless otherwise specified.
SYMBOL
V
OS
V
OS
I
OS
I
OS
I
BIAS
S
I
B
V
C
CM
CMRR
V
O
OH
V
OL
I
CC
A
VOL
O
PSRR
PARAMETER
Offset voltage
1
Drift
Offset current
Drift
Input current
2
Drift
Common mode voltage range
3
Common-mode
Common-mode rejection ratio
Output voltage swing
Output voltage swing
Supply current
Large-signal
Large signal voltage gain
Supply voltage rejection ratio
Amplifier-to-amplifier coupling
4
Output current (Source)
I
OUT
Output current (Sink)
TEST CONDITIONS
R
S
= 0
Ω
R
S
= 0
Ω;
over temp.
R
S
= 0
Ω;
over temp.
I
IN(+)
– I
IN(–)
Over temp.
Over temp.
I
IN(+)
or I
IN(–)
I
IN(+)
or I
IN(–)
; Over temp.
Over temp.
V+ = 30 V
V+ = 30 V; Over temp.
V+ = 30 V
R
L
≥
2 kΩ; V+ = 30 V; over temp.
R
L
≥
10 kΩ; V+ = 30 V; over temp.
R
L
≥
10 kΩ; over temp.
R
L
=
∞,
V+ = 30 V
R
L
=
∞
on all amplifiers; V+ = 30 V; over temp.
R
L
≥
2 kΩ; V
OUT
±10
V
V+ = 15 V (for large V
O
swing); over temp.
R
S
= 0
Ω
f=1kHz to 20kHz (input referred)
V
IN+
= +1 V
DC
; V
IN–
= 0 V
DC
; V+ = 15 V
DC
V
IN+
= +1 V
DC
; V
IN–
= 0 V
DC
; V+ = 15 V
DC
;
over temp.
V
IN–
= +1 V
DC
,;V
IN+
= 0 V
DC
; V+ = 15 V
DC
V
IN–
= +1 V
DC
; V
IN+
= 0 V
DC
;V+ = 15 V
DC
;
over temp.
V
IN+
= 0 V; V
IN–
= +1 V
DC
; V
O
= 200 mV
I
SC
GBW
SR
V
NOISE
Short circuit current
5
Differential input voltage
6
Unity gain bandwidth
Slew rate
Input noise voltage
T
amb
= 25
°C
T
amb
= 25
°C
T
amb
= 25
°C;
f = 1 kHz
1
0.3
40
20
10
10
5
12
25
15
65
100
–120
40
20
20
8
50
40
60
V+
0
0
65
26
27
28
5
0.5
0.6
100
20
1.0
1.2
85
10
45
40
50
V+–1.5
V+–2.0
7
5
LM358A
Min
Typ
±2
Max
±3
±5
20
±30
±75
300
100
200
UNIT
mV
mV
µV/°C
nA
nA
pA/°C
nA
nA
pA/°C
V
V
dB
V
V
mV
mA
mA
V/mV
V/mV
dB
dB
mA
mA
mA
mA
µA
mA
V
MHz
V/µs
nV/√Hz
NOTES:
1. V
O
≈
1.4 V, R
S
= 0
Ω
with V+ from 5 V to 30 V; and over the full input common-mode range (0 V to V+ –1.5 V).
2. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of
the output so no loading change exists on the input lines.
3. The input common-mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3 V. The upper end of
the common-mode voltage range is V+ –1.5 V, but either or both inputs can go to +32 V without damage.
4. Due to proximity of external components, insure that coupling is not originating via stray capacitance between these external parts. This
typically can be detected as this type of capacitance coupling increases at higher frequencies.
5. Short-circuits from the output to V+ can cause excessive heating and eventual destruction. The maximum output current is approximately
40 mA independent of the magnitude of V+. At values of supply voltage in excess of +15 V
DC
, continuous short-circuits can exceed the
power dissipation ratings and cause eventual destruction.
6. The input common-mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3 V. The upper end of
the common-mode voltage range is V+ –1.5 V, but either or both inputs can go to +32 V
DC
without damage.
2002 Jul 12
5
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
