25W AC-DC High Reliability Slim Wall-mounted Adaptor
SGA25E
series
■
Features
Ultra slim
Universal AC input / Full range
2 pole EURO plug
No load power consumption <0.075W
Energy efficiency Level
Ⅵ
Comply with EU ErP and meet CoC version 5
Class
Ⅱ
power (without earth pin)
Protections: Short circuit / Overload / Over voltage
Fully enclosed plastic case
Pass LPS
3 years warranty
■
Applications
Consumer electronic devices
Telecommunication devices
Office facilities
Industrial equipments
■
Description
SGA25E is a 25W ultra slim wall-mounted style single-output green adaptor series, which is compact and
convenient for carry. SGA25E is a class
Ⅱ
power unit (without FG) equipped with the standard 2-Pole
European plug, accepting the input range from 90VAC to 264VAC. The whole series provides different
models with output voltages ranging between 5VDC and 48VDC that it can satisfy the demands for various
types of consumer electronic devices.
With the efficiency up to 88% and the extremely low no-load power consumption below 0.075W, SGA25E
is compliant with EU ErP and meet CoC version 5. The supreme feature allows the adaptor to save the
energy when it is under either the operating mode or the standby mode. The entire series is approved
for international safety regulations; moreover, it adopts the 94V-0 flame retardant plastic case that it
can effectively prevent users from electric hazards.
■
Model Encoding
SGA 25 E 05 - P1J
P1J: Plug for standard model, 2.1
ψ×
5
.
5
ψ×
11mm,
C+ tuning fork type
DC plug type
Optional plug type available per request
Output voltage
European 2 pin AC plug
Output wattage
Series name
File Name:SGA25E-SPEC 2015-10-02
{
25W AC-DC High Reliability Slim Wall-mounted Adaptor
SPECIFICATION
ORDER NO.
SAFETY MODEL NO.
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER (max.)
OUTPUT
SGA25E
SGA25E18
18V
1.38A
0 ~ 1.38A
25W
80mVp-p
±3.0%
±1.0%
±3.0%
SGA25E24
24V
1.04A
0 ~ 1.04A
25W
80mVp-p
±2.0%
±1.0%
±2.0%
series
SGA25E05-P1J SGA25E07-P1J SGA25E09-P1J SGA25E12-P1J SGA25E15-P1J SGA25E18-P1J SGA25E24-P1J SGA25E48-P1J
SGA25E05
Note.2
5V
SGA25E07
7.5V
2.93A
0 ~ 2.93A
22W
80mVp-p
±5.0%
±1.0%
±5.0%
SGA25E09
9V
2.77A
0 ~ 2.77A
25W
80mVp-p
±5.0%
±1.0%
±5.0%
SGA25E12
12V
2.08A
0 ~ 2.08A
25W
80mVp-p
±3.0%
±1.0%
±3.0%
SGA25E15
15V
1.66A
0 ~ 1.66A
25W
80mVp-p
±3.0%
±1.0%
±3.0%
SGA25E48
48V
0.52A
0 ~ 0.52A
25W
120mVp-p
±2.0%
±1.0%
±2.0%
4A
0 ~ 4A
20W
RIPPLE & NOISE (max.)
Note.3
80mVp-p
VOLTAGE TOLERANCE
Note.4
±5.0%
LINE REGULATION
LOAD REGULATION
Note.5
±1.0%
Note.6
±5.0%
SETUP, RISE, HOLD UP TIME
300ms, 60ms, 18ms/230VAC
VOLTAGE RANGE
Note.7
90 ~ 264VAC
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT
INRUSH CURRENT (max.)
LEAKAGE CURRENT(max.)
OVERLOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note. 8)
EMC EMISSION
EMC IMMUNITY
LIFE
OTHERS
MTBF
DIMENSION
PACKING
PLUG
CABLE
47 ~ 63Hz
82.5%
0.65A / 115VAC
40A / 115VAC
0.25mA / 240VAC
85.5%
300ms, 60ms, 18ms/115VAC at full load
86.5%
87%
87%
87.5%
87.5%
89%
0.25A / 230VAC
60A / 230VAC
150 ~ 250% rated output power
120 ~ 180% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
110 ~ 140% rated output voltage
Protection type : Clamp by zener diode, output short
-20 ~ +60
℃
(Refer to "Derating Curve")
20% ~ 90% RH non-condensing
-20 ~ +85
℃
, 10 ~ 95% RH
±
0.03% /
℃
(0 ~ 40
℃
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
TUV EN60950-1 approved
I/P-O/P:4242VDC
I/P-O/P:100M Ohms / 500VDC / 25
℃
/ 70% RH
Compliance to EN55022 class B, EN61000-3-2,3
Compliance to EN61000-4,-2,3,4,5,6,8,11,
light industry level, criteria A
3 years : 100% load 40
℃
, 8hours / day
450Khrs min. MIL-HDBK-217F(25
℃
)
75.5*32*47.5mm (L*W*H)
158g ; 60pcs / 10.5kg / CARTON
See page 3 ; Other type available by customer requested
See page 3 ; Other type available by customer requested
CONNECTOR
NOTE
1.All parameters are specified at 230VAC input, rated load, 25
℃
70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 10% to 100% rated load
7.Derating may be needed under low input voltages. Please check the static characteristics for more details.
8.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
File Name:SGA25E-SPEC 2015-10-02
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
