MN34130
1/ 3.06” 13.4M pixel CMOS Image Sensor
MN34130
SmartFSI
®
Photos courtesy of Myomanji-temple, Kyoto
* This picture is SAMPLE picture.
What’s
SmartFSI
®
?
T
his photograph shows the ambience of a traditional Japanese tea room with its scarlet red carpet and
outside is the beautiful green garden of Kyoto.
SmartFSI
®
captures the moment with exceptional
clarity, displaying natural colors under different lighting conditions. Just like human eye would see...
SmartFSI
®
delivers comparable picture quality to that of a DSC. Can take the same picture quality as
your digital still camera?
Features
•
SmartFSI
®
superior to BSI evolves mobile devices.
• High picture quality equal to DSC, allowing you to take a night view
photo beautifully and vividly in detail
• Multi-fab supply for high-performance chip
• High CRA of up to 35~40 degrees, allowing a low-profile module
Chip Image
Camera Module Image
* “SmartFSI” is a registered trademark or trademark of Panasonic Corporation.
Publication date: June 2014
Page 1 of 2
MN34130
Specifications
Parameter
Scan mode
Optical size
Number of effective pixels
Number of active pixels
Total number of pixels
Pixel size
Actual imaging area dimensions
(active pixel area）
Color filter arrangement
Power supply voltage
Master clock
Bit number of internal ADC
Output signal type
Register I/F
Progressive scan
1/3.06 type 4:3aspect
4224 (H) x 3168 (V) = 13,381,632 (pixel)
4208 (H) x 3152 (V) = 13,263,616 (pixel)
4280 (H) x 3312 (V) = 14,175,360 (pixel)
1.12 (H) um x 1.12 (V) um
4712.96 (H) um x 3530.24 (V) um
R,G,B Bayer Pattern
2.8V / 1.8V / 1.2V
6MHz ~ 60MHz TYP 18MHz Jitter200ps
10bit
MIPI DDR method 648 Mbps
CSI-2 (I2C I/F)
Full scan mode
MIPI 4Lane 10bit format : 15.0 fps
Full HD mode (V2/2mix_cH2/2mix Mode)
MIPI 4Lane 10bit format : 60.0 fps
Full scan mode (15.0 fps)
1 / 15.02 s
1 / 52174 s (1/52174 step)
Analog gain 0dB ~+24dB 0.09375dB/step
Digital gain 0dB ~ +18dB 0.09375dB/step
Full scan mode H/V cropping
Preview
H: 1/2 ~ n/7 sub-sampled, weight considered mix mode
V: 1/2 ~ n/7 sub-sampled, weight considered mix mode
Functions
HD movie mode
1080/60p (V2/2mix_cH2mix_H/V cropping mode)
1080/30p (V2/2mix_cH2mix_V cropping mode)
720/60p (V3/3mix_cH3mix_V cropping mode)
Vertical and horizontal flip mode, Xenon/LED Flash control,
Support Mechanical shutter, OTP 512Byte, Power on Reset
Content
Output frame rate per second
Electronic shutter (Full scan)
Variable gain
Block Diagram
SCL
SDA
I2C
IF
Power
TG
MCLK
(6½60MHz)
Pixel Area
Digital
Circuit
External Supply
1.2v
1.8v
2.8v
PLL
MIPI
TX
IF
(648Mbps)
MIPI
RX
Parallel A/D Converter of Row
Page 2 of 2
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)
If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for general applications (such as office equipment, communications
equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.
Consult our sales staff in advance for information on the following applications:
–
Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment,
life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of
the products may directly jeopardize life or harm the human body.
It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with
your using the products described in this book for any special application, unless our company agrees to your using the products in
this book for any special application.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20100202
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
