F1510A
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 1000V Forward Current 1.5A
Features
•
•
•
•
•
•
•
•
Glass passivated Standard Rectifiers
Very low profile - typical height of 1.0 mm
Low forward voltage drop
Low leakage current
Moisture sensitivity: level 1, per J-STD-020
AEC-Q101 qualified
High temperature soldering guaranteed: 260℃/10 seconds
Halogen-free according to IEC 61249-2-21 definition
eSGA
(SOD‐123FL)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings
M i
R ti
Parameter
(TA = 25 °C unless otherwise noted)
Symbol
VRRM
VRMS
VDC
IF(AV)
IFSM
TJ, TSTG
F1510A
1000
700
1000
1.5
52
- 55 to + 150
Unit
V
V
V
A
A
°C
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
g
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
Operating junction and storage temperature
range
Electrical Characteristics
Parameter
Test Conditions
Maximum instantaneous
1.5A ,TA=25℃
forward voltage
Maximum DC reverse current
TA=25℃
at rated DC blocking voltage
TA=125℃
I
F
=0.5A,I
R
=1.0A,
Typical reverse recovery time
I
rr
=0.25A
Typical junction capacitance 4.0 V, 1 MHz
Typical thermal resistance
1)
juntion to ambient
juntion to case
juntion to mount
(TA = 25 °C unless otherwise noted)
F1510A
1.1
5
50
1.8
6
70
35
14
℃/W
Unit
Volts
µA
uS
pF
Symbol
V
F
I
R
t
rr
C
J
R
θJA
R
θJC
R
θJM
Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
www.goodark.com
1/4
2014.02-Rev.A
F1510A
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 1000V Forward Current 1.5A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 1.Forward Current Derating Curve
Figure 2.Maximum Non‐Repetitive Peak
g
Forward Surge Current
Figure 3. Typical Instantaneous Forward Characteristics
Figure 4. Typical Reverse Characteristics
www.goodark.com
2/4
2014.02-Rev.A
F1510A
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 1000V Forward Current 1.5A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the
Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any
license under any intellectual property rights, or any other rights belonging to Suzhou Good Ark
rights
rights,
Good-Ark
Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or
infringement of any third-party ’ s rights, originating in the use of any product data, diagrams,
charts, programs, algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs
and algorithms represents information on products at the time of publication of these materials,
and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to
product improvements or other reasons. It is therefore recommended that customers contact
Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd.
for the latest product information before purchasing a product listed herein. The information
described here may contain technical inacc racies or t pographical errors S ho Good Ark
ma
inaccuracies
typographical errors. Suzhou Good-Ark
Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from
these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-
Ark Electronics Co., Ltd. by various means, including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total
system before making a final decision on the applicability of the information and products.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or
other loss resulting from the information contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or
reproduce in whole or in part these materials.
d
i
h l
i
t th
t i l
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further
details on these materials or the products contained herein.
www.goodark.com
4/4
2014.02-Rev.A
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
