V-430 P
Vishay Sprague
Metallized Polyester Film Capacitors, Wrap-and-Fill
FEATURES
•
•
•
•
•
Economical
Extensive standard ratings
Rugged construction
Small size
Compliant to RoHS directive 2002/95/EC
PERFORMANCE CHARACTERISTICS
Operating Temperature:
- 55 °C to + 85 °C
Capacitance Range:
0.0047 µF to 10.0 µF
Capactiance Tolerance:
± 20 %, ± 10 %, ± 5 %
DC Voltage Rating:
50 WVDC to 600 WVDC
Dissipation Factor:
1.0 % maximum
Voltage Test:
200 % of rated voltage for 2 min
Insulation Resistance:
At + 25 °C: 25 000 MΩ/µF or 50 000 MΩ minimum
At + 85 °C: 1000 MΩ/µF or 2500 MΩ minimum
Vibration Test (Condition B):
No mechanical damage, short, open or intermittent circuits.
DC Life Test:
125 % of rated voltage for 250 h at + 85 °C.
No open or short circuits. No visible damage.
Maximum
Δ
CAP = ± 10 %
Minimum IR = 50 % of initial limit
Maximum DF = 1.25 %
Humidity Test:
95 % relative humidity at + 40 °C for 250 h.
No visible damage.
Maximum
Δ
CAP ± 10 %
Minimum IR = 20 % of initial limit
Maximum DF = 2.0 %
PHYSICAL CHARACTERISTICS
Lead Pull:
5 lb (2.3 kg) for one min. No physical damage.
Lead Bend:
After three complete consecutive bends, no
damage.
Marking:
Sprague
®
trademark, type or part number,
capacitance and voltage.
DIMENSIONS
in inches (millimeters)
1.750 [44.45]
Min.
L
+ 0.062 [1.57]
- 0.031 [0.79]
1.750 [44.45]
Min.
D
Max.
Solid Tinned
Wire
(1)
Note
(1)
Lead size: D Max. < 0.270 [6.86] 0.025 [0.64] (No. 22 AWG). D Max
≥
0.270 [6.86] 0.032 [0.81] (No. 20 AWG).
Leads to be within ± 0.062" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge.
STANDARD RATINGS
in inches [millimeters]
CAPACITANCE
(µF)
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
PART NUMBER
± 10 % TOLERANCE ± 5 % TOLERANCE
50 WVDC
V-430P124X9050
V-430P124X5050
V-430P154X9050
V-430P154X5050
V-430P184X9050
V-430P184X5050
V-430P224X9050
V-430P224X5050
V-430P274X9050
V-430P274X5050
V-430P334X9050
V-430P334X5050
V-430P394X9050
V-430P394X5050
V-430P474X9050
V-430P474X5050
V-430P564X9050
V-430P564X5050
V-430P684X9050
V-430P684X5050
V-430P824X9050
V-430P824X5050
CASE SIZE
D
0.196 [4.98]
0.210 [5.33]
0.223 [5.66]
0.240 [6.10]
0.258 [6.55]
0.279 [7.09]
0.250 [6.35]
0.269 [6.83]
0.288 [7.32]
0.311 [7.90]
0.270 [6.86]
L
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.750 [19.05]
0.750 [19.05]
0.750 [19.05]
0.750 [19.05]
1.000 [25.40]
LEAD
AWG NO.
22
22
22
22
22
20
22
22
20
20
20
www.vishay.com
25
Document Number: 42091
Revision: 12-Mar-09
For technical questions, contact:
spresale@vishay.com
V-430 P
Metallized Polyester Film Capacitors, Wrap-and-Fill
Vishay Sprague
STANDARD RATINGS
in inches [millimeters]
CAPACITANCE
(µF)
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.5
2.0
0.0047
0.0056
0.0068
0.0082
0.01
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
PART NUMBER
± 10 % TOLERANCE ± 5 % TOLERANCE
400 WVDC
V-430P153X9400
V-430P153X5400
V-430P183X9400
V-430P183X5400
V-430P223X9400
V-430P223X5400
V-430P273X9400
V-430P273X5400
V-430P333X9400
V-430P333X5400
V-430P393X9400
V-430P393X5400
V-430P473X9400
V-430P473X5400
V-430P563X9400
V-430P563X5400
V-430P683X9400
V-430P683X5400
V-430P823X9400
V-430P823X5400
V-430P104X9400
V-430P104X5400
V-430P124X9400
V-430P124X5400
V-430P154X9400
V-430P154X5400
V-430P184X9400
V-430P184X5400
V-430P224X9400
V-430P224X5400
V-430P274X9400
V-430P274X5400
V-430P334X9400
V-430P334X5400
V-430P394X9400
V-430P394X5400
V-430P474X9400
V-430P474X5400
V-430P564X9400
V-430P564X5400
V-430P684X9400
V-430P684X5400
V-430P824X9400
V-430P824X5400
V-430P105X9400
V-430P105X5400
V-430P155X9400
V-430P155X5400
V-430P205X9400
V-430P205X5400
600 WVDC
V-430P472X9600
V-430P472X5600
V-430P562X9600
V-430P562X5600
V-430P682X9600
V-430P682X5600
V-430P822X9600
V-430P822X5600
V-430P103X9600
V-430P103X5600
V-430P123X9600
V-430P123X5600
V-430P153X9600
V-430P153X5600
V-430P183X9600
V-430P183X5600
V-430P223X9600
V-430P223X5600
V-430P273X9600
V-430P273X5600
V-430P333X9600
V-430P333X5600
V-430P393X9600
V-430P393X5600
V-430P473X9600
V-430P473X5600
V-430P563X9600
V-430P563X5600
V-430P683X9600
V-430P683X5600
V-430P823X9600
V-430P823X5600
V-430P104X9600
V-430P104X5600
V-430P124X9600
V-430P124X5600
V-430P154X9600
V-430P154X5600
V-430P184X9600
V-430P184X5600
V-430P224X9600
V-430P224X5600
V-430P274X9600
V-430P274X5600
V-430P334X9600
V-430P334X5600
V-430P394X9600
V-430P394X5600
V-430P474X9600
V-430P474X5600
V-430P564X9600
V-430P564X5600
V-430P684X9600
V-430P684X5600
CASE SIZE
D
0.186 [4.72]
0.197 [5.00]
0.210 [5.33]
0.224 [5.69]
0.241 [6.12]
0.256 [6.50]
0.275 [6.99]
0.248 [6.30]
0.266 [6.76]
0.286 [7.26]
0.310 [7.87]
0.268 [6.81]
0.293 [7.44]
0.315 [8.00]
0.342 [8.69]
0.322 [8.18]
0.350 [8.89]
0.337 [8.56]
0.364 [9.25]
0.393 [9.98]
0.402 [10.21]
0.434 [11.02]
0.472 [11.99]
0.563 [14.30]
0.640 [16.26]
0.187 [4.75]
0.197 [5.00]
0.209 [5.31]
0.223 [5.66]
0.239 [6.07]
0.255 [6.48]
0.224 [5.69]
0.239 [6.07]
0.257 [6.53]
0.278 [7.06]
0.300 [7.62]
0.251 [6.38]
0.269 [6.83]
0.288 [7.32]
0.311 [7.90]
0.336 [8.53]
0.365 [9.27]
0.335 [8.51]
0.368 [9.35]
0.354 [8.99]
0.385 [9.78]
0.421 [10.69]
0.428 [10.87]
0.459 [11.66]
0.497 [12.62]
0.537 [13.64]
0.585 [14.86]
L
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.750 [19.05]
0.750 [19.05]
0.750 [19.05]
0.750 [19.05]
1.000 [25.40]
1.000 [25.40]
1.000 [25.40]
1.000 [25.40]
1.250 [31.75]
1.250 [31.75]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.750 [19.05]
0.750 [19.05]
0.750 [19.05]
0.750 [19.05]
0.750 [19.05]
1.000 [25.40]
1.000 [25.40]
1.000 [25.40]
1.000 [25.40]
1.000 [25.40]
1.000 [25.40]
1.250 [31.75]
1.250 [31.75]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
LEAD
AWG NO.
22
22
22
22
22
22
20
22
22
20
20
22
20
20
20
20
20
20
20
20
20
20
20
20
20
22
22
22
22
22
22
22
22
22
20
20
22
22
20
20
20
20
20
20
20
20
20
20
20
20
20
20
Note
• Other capacitance values and voltage ratings are available upon request
ORDERING INFORMATION
V-430P
TYPE
124
CAPACITANCE
This is expressed in picofarads. The first two digits
are the significant figures. The third is the number of
zeros to follow. Values must conform to the decade
rating for the tolerance specified.
Document Number: 42091
Revision: 12-Mar-09
X9
CAPACITANCE TOLERANCE
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
050
DC VOLTAGE RATING
This is expressed in volts. To complete
the three-digit block, zeros precede the
voltage rating.
For technical questions, contact:
spresale@vishay.com
www.vishay.com
27
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
