SMT Ultra-Miniature Coaxial Connectors - Mating Heights Owing to the Lowest Profile and the Lightest
U.FL Series
Meets up to 6 GHz Requirement
Figure 1. Mating Height Comparison
(with Hirose Electric Products)
2.4(2.5Max)
U.FL
E.FL
sFeatures
1. Mating Heights Owing to Lowest Profile
Height from the printed circuit board when mates a receptacle with
a (right-angle) plug is 2.5 mm maximum. This low Profile is at the
world’s shortest level.
qSpace
Factor of Mated Connector
Figure 2. U.FL-LP-040 and U.FL-R-SMT
2. Extremely Small Board Occupation Area
Dia.0.81
U.FL-R-SMT
U.FL-LP-066
Dia.1.13
Dia.1.32
3. World’s Lightest
These are the world’s lightest coaxial connectors.
Receptacle: 15.7 mg
Right-angle plugs
For
Ø
0.81 mm cable: 53.7 mg
For
Ø 1.13 &
1.32 mm cable: 59.1 mg
4. Can Be Used Up to a Frequency of 6 GHz
To meet the frequency requirements of a wide variety of miniature
equipment, these connectors offer high frequency performance
from DC to 6 GHz.
Figure 3. U.FL-LP-066and U.FL-R-SMT
5. Can Be Used with Automatic Mounting
The embossed tape packaging specification of the receptacles
permits automatic mounting.
6. Use of Ultra-Fine Teflon Cable
From among the types of suitable cable,
Ø
0.8 mm (single shield)
outside diameter ultra-fine Teflon coaxial cable has been made a
standard specification in consideration of improving the
construction qualities and construction area.
An external diameter
Ø1.32
mm (double shield) &
Ø1.13mm (single
shield)
ultra-fine Teflon coaxial cable specification is also available.
2.5Max
7. Simple Removal of Connectors
The extraction jig permits simple removal of connectors.
8. Mating Checks Are Easy
Subminiature size notwithstanding, the lock sensation permits a
check of sure mating.
sApplications
Mobile phones, wireless communications
equipment, electronic measuring instruments,
GPS, wireless LAN, Bluetooth etc.
2002.3
2.5Max
In comparison with our E.FL Series of SMT coaxial connectors, the
receptacles offer a reduction of approximately 18% of the board
occupation area resulting in an area of just 7.7 mm
2
.
U.FL-R-SMT
U.FL-LP-040
3.2Max
1
s
Product Specifications
Ratings
Nominal characteristic impedance
Rated voltage
Rated frequency
50
ø
60 V AC (rms)
DC to 6 GHz
Operating temperature range
Operating humidity
-40˚C to +90˚C
90% max.
Item
1. Contact resistance
2. Insulation resistance
3. Withstand voltage
4. V.S.W.R.*
Dia.0.81Cable
Dia.1.13Cable
Dia.1.32Cable
5. Female contact holding force 0.15 N min.
6. Repetitive operation
Contact resistance
Specification
Center: 20 m
ø
max.
Outside: 10 m
ø
max.
500 M
ø
min.
No line or insulation breakdown
1.3 max.
1.35
1.4
1.5
3 to 6 GHz
Conditions
Measured at 10 mA max.
Measured at 100 V DC
200 V AC for 1 minute
DC to 3 GHz
Measured with a
Ø
0.475 pin gauge
25 m
ø
max. (Center)
15 m
ø
max. (Outside)
30 cycles of insertion and disengagement
Frequency of 10 to 100 Hz, single amplitude of 1.5 mm,
acceleration of 59 m/s
2
, for 5 cyles in the direction of each of the 3 axes
Acceleration of 735 m/s
2
, 11 ms duration, sine half-wave
waveform, for 6 cycles in the direction of each of the 3 axes
Temperature of 40˚C, humidity of 95%,
let stand for 96 hours
Temperature: +40˚C
/
5 to 35˚C
/
+90˚C
/
5 to 35˚C
Time:
30 min.
/
Within 5 min.
/
30 min.
/
Within 5 min.
Cycles: 5
48 hours continuous exposure to 5% salt water
7. Vibration
No momentary disconnections of 1 µs min.
No damage, cracks, or parts looseness min.
No momentary disconnections of 1 µs min.
No damage, cracks, or parts looseness
No damage, cracks, or parts looseness
Insulation resistance 100 M
ø
min.(High temperature)
Insulation resistance 500 M
ø
min.(Pry)
No damage, cracks, or parts looseness
Contact resistance 25 m
ø
max. (Center)
15 m
ø
max. (Outside)
No excessive corrosion
8. Shock
9. Humidity resistance
9.
(Steady state)
10. Temperature cycle
11. Salt spray test
*V.S.W.R. Measurement System
The above V.S.W.R. standard values were measured using the measurement system of the diagram below.
NOTE 1: Cable type connectors were measured with SMA conversion adapters
attached to both ends of the harness product of a suitable 100cm cable.
NOTE 2: Board type connectors were mounted to a 50Ω glass epoxy board and
measurements were conducted with SMA conversion adapters attached.
sMaterials
Part
Shell
Male center contact
Female center contact
Insulator
Plug
Receptacle
Material
Phosphor bronze
Brass
Phosphor bronze
PBT
LCP
Finish
Silver plating
Gold plating
Gold plating
Black
Beige
Remarks
—————
—————
—————
UL94V-0
UL94V-0
2
sPlugs
U.FL-LP-040
Form of Plug After Cable Wiring
U.FL-LP-066
Item
HRS No.
Part No.
Form of Plug After Cable Wiring
Applicable Cable
RF-MF5010 Manufactured by Nissei Electric Co., Ltd.
J12B0964 Manufactured by Junkosha Co., Ltd.
CO-6F-SB-CX50 Manufactured by Hitachi Cable, Ltd.
RF-MF5016 Manufactured by Nissei Electric Co., Ltd.
J12B1054 Manufactured by Junkosha Co., Ltd.
CL331-0452-5
U.FL-LP-066
A12B0733 Manufactured by Junkosha Co., Ltd.
CO-6F-DSB-CX-50 Manufactured by Hitachi Cable, Ltd.
59.1/unit
Weight (mg)
Right-angle plug shell
(for
Ø
0.81 cable)
CL331-0451-2
U.FL-LP-040
53.7/unit
Right-angle plug shell
(for
Ø
1.13 cable)
Right-angle plug shell
(for
Ø
1.32 cable)
Please order plugs with the cable assembly specifications.
sCable
Assembly
Dimension of U.FL Series assembly products should be made as indicated below.
Single-Ended Cable Assembly
Double-Ended Cable Assembly
qOrdering
Information
qCable
Assembly Overall Length Standard Tolerance
3
4
Overall Length L (mm)
0035<
L<
0200
= =
0200<L<
=0500
<
0500<L=1000
1000<L<
=1000
Note: Shortest length L is 35 mm.
Standard Tolerance (mm)
±04
±08
±12
±1.5%
U.FL - [] LP - [] - A - (L)
1
1
Series name
2
Assembly type
3
Cable type
4
Overall length (mm)
2
U.FL
Blank: Single ended
2: Double ended
04 : For use with
Ø
0.81 cable
5016 : For use with
Ø
1.13 cable
066 : For use with
Ø
1.32 cable
Length L is expressed in mm units.
Part No. of Cable Assembly
U.FL-2LP-04-A-(L)
U.FL-LP-04-A-(L)
U.FL-2LP-5016-A-(L)
U.FL-LP-5016-A-(L)
U.FL-2LP-066-A-(L)
U.FL-LP-066-A-(L)
CL No.
321-1937-2-
**
321-1998-7-
**
321-2493-6-
**
321-2492-3-
**
321-2170-7-
**
321-2573-3-
Description
Dia. 0.81mm Double Ended Cable Assembly
Dia. 0.81mm Single Ended Cable Assembly
Dia. 1.13mm Double Ended Cable Assembly
Dia. 1.13mm Single Ended Cable Assembly
Dia. 1.32mm Double Ended Cable Assembly
Dia. 1.32mm Single Ended Cable Assembly
Please contact Hirose Sales Representative about cable length and cable end treatment.
**
3
sReceptacles
NOTE 1: Receptacles of the (01) specification are sold by
the pack with 100 pieces per pack. Please order
in pack units.
NOTE 2: Receptacles of the (10) specification are sold by
the reel (which contains 2,500 pieces). Please
order in reel units.
NOTE 3: Permissible value for mold resin which gets onto
the center contact.
HRS No.
CL331-0471-0-01
CL331-0471-0-10
Part No.
U.FL-R-SMT(01)
U.FL-R-SMT(10)
Sales Quantity
Pack sales (100 pieces per pack)
Reel sales (2,500 pieces per reel)
(Note 3)
Recommended PCB Footprints
Weight (mg)
15.7/unit
qPackaging
Specifications
Embossed Carrier Tape Dimensions
Unreeling direction
Reel Dimensions
4
sConversion
Adapter
qSMA
Conversion Adapter
(Coupling portion: U.FL side jack - SMA side plug)
NOTE: The U.FL side coupling portion has a weaker lock than
the regular product and, therefore, cannot be used for
purposes other than performance measurements.
HRS No.
CL311-0300-2
Product No.
HRMP-U.FLJ
qSMA
Conversion Adapter
(Coupling portion: U.FL side plug - SMA side jack)
NOTE: The U.FL side coupling portion has a weaker lock than
the regular product and, therefore, cannot be used for
purposes other than performance measurements.
HRS No.
CL311-0301-5
Product No.
HRMJ-U.FLP
sInspection
Receptacle
This receptacle is used for inspecting the continuity,
withstand voltage, and other aspects of the harness
product.
NOTE: The U.FL side coupling portion does not have a lock
and, therefore, cannot be used for purposes other than
continuity and withstand voltage inspections.
HRS No.
CL331-0466-0
Product No.
U.FL-R-1
sExtraction
Jig
This jig is used for extraction from a coupled condition.
90
50
U.FL
Ø15
5
2.1
U.FL-LP-N-2
HRS No.
CL331-0494-5
CL331-0441-9
Product No.
U.FL-LP-N-2
E.FL-LP-N-2
5
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
