COMMUNICATIONS TEST & MEASUREMENT
Flexible Small Channel Count Switch Module
SQ Series
Key Features
• High optical performance
• High repeatability
• Latching or non-latching
• Field configurable default non-latch channel
• Wide choice of configurations
• Off position (optional)
• Status feedback
• Common package size for all configurations
Applications
• Incorporation into customized
switch assemblies for test and
measurement applications
• Network monitoring and testing
• Sensor switching
• Source/detection selection
• Research and development (R&D)
The JDSU SQ series optical switch is a highly flexible module with high optical
performance in latching or non-latching applications. The full feature set and
large number of optical configurations available in a common package and
interface make it ideal for a wide spectrum of applications.
The switch connects one or two channels to one of several (up to eight) channels.
Both single-mode (SM) and multimode (MM) versions are available. This switch
is also available in multi-pack configurations, for example 2 x 4, 2 x 6, 2 x 8 D
configuration (Duplex 1 x 2, 1 x 3, 1 x 4).
While in operation, the switch connects optical channels by using prisms to
redirect the signal from an input port into a selected output port. Using
collimating optics minimizes the insertion loss (IL) and improves the
repeatability and stability of the optical parameters. The switches are optically
passive, and therefore, are transparent to signaling formats.
Configurations can be manufactured for bi-directional performance as a factory option.
Safety Information
• Complies with GR-1073
WEBSITE
:
www.jdsu.com
FLEXIBLE SMALL CHANNEL COUNT SWITCH MODULE
2
D Configuration
(SQ switch shown with OFF position option)
Continued
SQ Series Configurations
R
R
1A
1B
2A
2B
3A
3B
4A
4B
A
B
The common package may be ordered in optical configurations as follows:
• 1 x 3 up to 1 x 8
• 2 x 4, 2 x 6, 2 x 8 D configuration (Duplex 1 x 2, 1 x 3, 1 x 4)
• Dual 1 x 2
• SM or MM fiber
• 900 mm buffered fiber or 3 mm cable
All units are customer-configurable as:
• Latching
• Non-latching
• Default channel for non-latch operation
Electrical interfaces available include:
• 2 x 12 male header on the side
• 2 x 12 male (recessed) on the bottom (for PCB mounting)
The 2 x N configuration allows for mass reconfiguration of optical paths.
It provides simultaneous connections of 2 inputs to a number of outputs.
Dimensions Diagram
(Specifications in mm [inches] unless otherwise noted.)
69.8 (2.750)
6.0 (.235)
17.0 (.670)
12.8 (.502)
6.0 (.235)
57.9 (2.280)
6.4 (.250) TYP
22.1 (.868)
23.8
[.937 ]
57.9 (2.280)
3.5 (.137) TYP
28.0 (1.101)
69.8 (2.750)
3.5 (.136)
11.0 (.435)
Mounting hole
0 4.0 (.159) thru
c 7.1 (.280), 5.4 (.214)
4 PLS
9.0 (.355)
25.4 (1.001)
25.4 (1.001)
4.3 (.168)
2
24
2
24
1
23
SIDE MOUNT
VERSION SHOWN
1
23
BOTTOM MOUNT
VERSION SHOWN
FLEXIBLE SMALL CHANNEL COUNT SWITCH MODULE
3
Specifications
Parameter
Wavelength range
Fiber type
Fiber jacket size
Configuration
Single-mode (SM)
850 to 1350 nm
or 1270 to 1670 nm
9/125 µm
Multimode (MM)
850 to 1350 nm
Optical connectors
Length
Test orientation
Insertion loss (IL)
2
(includes one FC/PC connection)
1 x 3, 1 x 4, Dual 1 x 2, 2 x 4 "D"
1 x 5, 1 x 6, 1 x 7, 1 x 8, 2 x 6 "D", 2 x 8 "D"
Return loss (RL) (excludes connectors)
Selected port SM
Selected port MM
Polarization dependent loss (PDL)
1 x 3, 1 x 4, Dual 1 x 2, 2 x 4 "D"
1 x 5, 1 x 6, 1 x 7, 1 x 8, 2 x 6 "D", 2 x 8 "D"
IL stability
3
1 hour
24 hours
Repeatability
4,5
1 x 3, 1 x 4, Dual 1 x 2, 2 x 4 "D"
1 x 5, 1 x 6, 1 x 7, 1 x 8, 2 x 6 "D", 2 x 8 "D"
Crosstalk/isolation
Selected port to other ports
Bi-directional - non-selected to other non-selected
Optical input power
Lifetime
Switching time
Control interface
Operating voltage (DC)
2,6
Qualification testing
Operating temperature
Storage temperature
Humidity (relative, non-condensing)
Operating
Storage
Dimensions (W x H x D)
Weight
50/125 µm, 62.5/125 µm
900 µm fiber, 3.0 mm cable
1 x 3 to 1 x 8
Dual 1 x 2 (2 independent 1 x 2's)
Duplex 1 x 2 (2 x 4 "D")
Duplex 1 x 3 (2 x 6 "D")
Duplex 1 x 4 (2 x 8 "D")
FC/PC, FC/APC, SC/PC, SC/APC, LC/PC, no connector
0.3 to 9.9 m (± 5 cm for lengths under 1 m, ± 5% for lengths 1 m or greater)
Standard, bi-directional
< 1.0 dB
< 1.15 dB
> 55 dB
> 30 dB
-
-
± 0.02 dB
± 0.05 dB
(± 0.005 dB)
(± 0.01 dB)
< 1.1 dB
< 1.25 dB
> 55 dB
> 30 dB
< 0.08 dB
< 0.10 dB
± 0.02 dB
± 0.05 dB
< 0.01 dB (p-p)
< 0.02 dB (p-p)
< -60 dB
< -50 dB
< -50 dB
< -40 dB
300 mW max
> 10 million cycles
< 20 ms
Configurable TTL
5.0 V DC ± 10 % at 100 mA (300 mA max during switching)
GR1073 for Central Office
182 g (1 x 8, 1.5 meters of 900 µm fiber, FC/PC connectors)
0 to 60 °C
-40 to 85 °C
< 90 % at 23 °C, < 20 % at 60 °C
< 90 % at 60 °C, < 40 % at 85 °C
70 x 17 x 70 mm
119 g (1 x 8, 1.5 meters of 900 µm fiber, no connectors)
1. Unless otherwise specified, all specifications at start of life at 23 °C ± 3 °C and 45 % RH ± 5 %.
2. At 23 °C ± 3 °C at specified test wavelengths (850/1310 MM or 1310/1550 SM) and optical input power of -25 to 0 dBm.
3. Drift of any channel at ± 3 °C deviation of ambient temperature without changing channels (excludes repeatability).
4. Repeatability as per Telcordia GR-1073-CORE (100 cycles, max-min/peak-to-peak).
5. Measured between two consecutive readings over 100 cycles.
6. At 23°C. Over full temperature range: 5.0 V ± 5%.
FLEXIBLE SMALL CHANNEL COUNT SWITCH MODULE
Ordering Information
Sample: SQ141N+137FFPL1.0
SQ
+1
Code
0.3
1.0
1.5
3.0
9.0
.
Pigtail Length
Minimum length
1.0 meter
1.5 meters (std)
3.0 meters
9.0 meters
Code
13
14
15
16
17
18
D4
D6
D8
22
Optical Configurations
1x3
1x4
1x5
1x6
1x7
1x8
Duplex 1 x 2 (2 x 4 D
config.)
Duplex 1 x 3 (2 x 6 D
config.)
Duplex 1 x 4 (2 x 8 D
config.)
Dual 1 x 2 (2 of 1 x 2)
Code
Y
N
Option
Off position
Standard channel config.
Code
F
Q
Wavelength (nm)
1270
to
1670
850
to
1350 (MM only)
Code
3
4
Control Interface
2 x 12
side
header
2 x 12 bottom header
Code
1
3
Test Configuration
Forward
Bidirectional
Code
7
1
2
Fiber Type (µm)
9/125
50/125
62.5/125
Code
FP
FA
SC
SU
NC
Connector Type
FC/PC
FC/APC
SC/PC
SC/APC
No
connector
Code
L
E
Pigtail Type
3.0 mm jacketed
cable
900 µm
tight
buffer fiber
If the configurations available do not meet your performance
requirements, please contact our global sales and customer
service team to discuss the potential for specialized solutions.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including
withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase
Corporation. All rights reserved. 21042187 Rev. 005 05/06 FSCCSM.DS.TM.AE
Test & Measurement Regional Sales
NORTH AMERICA
TEL
:
1 866 228 3762
FAX
:
+1 301 353 9216
LATIN AMERICA
TEL
:
+55 11 5503 3800
FAX
:
+55 11 5505 1598
ASIA PACIFIC
TEL
:
+852 2892 0990
FAX
:
+852 2892 0770
EMEA
TEL
:
+49 7121 86 2222
FAX
:
+49 7121 86 1222
WEBSITE
:
www.jdsu.com
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
