2000 MODULAR CONSOLE - SERIES
ASSEMBLY INSTRUCTIONS FOR
DESK UNIT TO BASE UNIT
BUL10068
REV.
A
PAGE 1 OF 1
PRE - ASSEMBLY INSTRUCTIONS:
Caution:
Check gasket on top of base unit
for damage before assembly. If
cut or torn, contact Hammond
Manufacturing for immediate
replacement.
Note:
When assembling total modular
system build from the floor up for
assembly ease. Plinth > Base Unit
> Desk Unit > Turret
1
A
GASKET
SURFACE
B
3
2
4
ASSEMBLY INSTRUCTIONS:
DETAIL A
SEE
STEP D
FOR
INSTRUCTIONS
A) Open doors or remove doors for ease of assmebly. This will
allow for visual alignment of mating parts. Avoid handling or
hitting gasket on objects.
DETAIL B
B) Align desk (item 1) over top opening in base unit (item 2). Side
edges of desk and base are to be flush.
C) Front and rear slots in desk bottom are to be aligned with
mounting slots on base top.
PARTS LIST
ITEM No.
DESCRIPTION
DESK UNIT
1
BASE UNIT
2
1/4-20 X 3/4 HEX CAP SCREW
3
1/4-20 KEP NUT
4
TOOL BOX
3/8, 7/16" Socket
Wrench
QTY
1
1
4, 6, or 8
4, 6, or 8
D) Once the desk is seated properly on the base assemble using
1/4-20 x .75 HEX HD. screws and 1/4-20 KEP nuts (item 3 & 4 )
provided. Torque screws and nuts to 115 in/lbs.
3/8, 7/16 Open
Wrench
HAMMOND
MANUFACTURING
ELECTRONICS GROUP
TM
visit our website @
www.hammondmfg.com
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
