2000 MODULAR CONSOLE- SERIES
ASSEMBLY INSTRUCTIONS FOR
BASE COVER TO BASE UNIT
BUL10071
REV.
A
PAGE 1 OF 1
PRE - ASSEMBLY INSTRUCTIONS:
1
Caution:
Check gasket on top of base unit for
damage before assembly. If cut or torn,
contact Hammond Manufacturing for
immediate replacement.
Note:
When assembling total modular system
build from the floor up for assembly ease.
Plinth > Base Unit > Desk Unit > Turret
3
SEE
STEP D
FOR
INSTRUCTIONS
GASKET
SURFACE
4
2
ASSEMBLY INSTRUCTIONS:
A) Open or remove doors for ease of assembly. This will allow for
visual alignment of mating parts. Avoid handling or hitting
gasket on objects.
B) Align base cover (item 1) over top opening in base unit (item 2).
Side edges of cover and base unit are to be flush.
PARTS LIST
ITEM No.
DESCRIPTION
BASE COVER
1
BASE UNIT
2
1/4-20 X 3/4 HEX CAP SCREW
3
1/4-20 KEP NUT
4
TOOL BOX
3/8, 7/16" Socket
Wrench
C) Front and rear holes in base cover bottom are to be aligned with
mounting slots on base top
QTY
1
1
4, 6, or 8
4, 6, or 8
D) Once the base cover is seated properly on the base, assemble
using 1/4-20 x .75 hex hd. screws and 1/4-20 nuts (item 3 & 4)
provided. Torque screws and nuts to 115 in/lbs.
3/8, 7/16 Open
Wrench
HAMMOND
MANUFACTURING
ELECTRONICS GROUP
TM
visit our website @
www.hammondmfg.com
FPGA/CPLD
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
