equipment and other gain / level control circuits.
The MAATSS0018 is a GaAs MMIC using a mature
1-micron process. The process features full chip
passivation for increased performance and reliability.
RF2
V1
Pin Configuration
Pin No.
1
2
3
4
Function
RF1
GND
RF2
V1
V2
Description
RF In/Out
RF Ground
RF In/Out
Control Voltage
Control Voltage
Ordering Information
Part Number
MAATSS0018
MAATSS0018TR
MAATSS0018SMB
1,2
5
Package
Bulk Packaging
1000 piece reel
Sample Board
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macomtech.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAATSS0018
Digital Attenuator, 10 dB, 1-Bit
DC - 2.0 GHz
Electrical Specifications: T
A
= +25°C, V
C
= 0 V / -3 V, Z
0
= 50 Ω
Parameter
Insertion Loss
Attenuation
VSWR
IP
3
P1dB
T
RISE
, T
FALL
T
ON
, T
OFF
Transients
Control Current
Test Conditions
0 - 1 GHz
1 - 2 GHz
DC - 2 GHz
0 - 2 GHz
2 Tone @ 0 dBm, 5 MHz spacing
1 GHz
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
In Band
│V
C
│ = 3 V
Units
dB
dB
Ratio
dBm
dBm
ns
ns
mV
µA
Min.
—
9.5
—
—
—
—
—
—
—
Typ.
0.3
0.5
10
1.4:1
50
28
5
10
6
25
Max.
0.45
0.7
10.5
—
—
—
—
—
—
—
Rev. V2
Absolute Maximum Ratings
3,4
Parameter
Input Power
50 MHz
500 - 2000 MHz
Control Voltage
Operating Temperature
Storing Temperature
Absolute Maximum
+27 dBm
+34 dBm
-8.5 V < V
C
< +8 V
-40°C to +85°C
-65°C to +150°C
Truth Table
5,6,7
V1
0
1
V2
1
0
Attenuation State
10 dB
Insertion Loss
5. For positive voltage control, external DC blocking capacitors
are required on all RF ports (pins 1, 2 and 3)
6. Differential voltage, V(state 1) - V(state 0), must be +2.8 V
minimum and less than 8 V.
7. 0 = -8 V to 0.2 V, 1 = -0.2 V to 8 V
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. MACOM does not recommend sustained operation near these
survivability limits.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macomtech.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAATSS0018
Digital Attenuator, 10 dB, 1-Bit
DC - 2.0 GHz
Typical Performance Curves (39 pF capacitors used for positive voltage control)
Insertion Loss (Positive Control)
1.0
+25°C
-40°C
+85°C
Rev. V2
Insertion Loss (Negative Control)
1.0
0.8
0.8
+25°C
-40°C
+85°C
0.6
0.6
0.4
0.4
0.2
0.2
0.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
Relative Attenuation (Positive Control)
11.0
+25°C
-40°C
+85°C
Relative Attenuation (Negative Control)
11.0
+25°C
-40°C
+85°C
10.5
10.5
10.0
10.0
9.5
9.5
9.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
9.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
Return Loss (Reference State)
40
Positive Control
Negative Control
Return Loss (10 dB State)
40
Positive Control
Negative Control
30
30
20
20
10
10
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3
Frequency (GHz)
Frequency (GHz)
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macomtech.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAATSS0018
Digital Attenuator, 10 dB, 1-Bit
DC - 2.0 GHz
Lead-Free
SOT-25
†
Rev. V2
† Reference Application Note M538 for lead-free solder reflow recommendations.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macomtech.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAATSS0018
Digital Attenuator, 10 dB, 1-Bit
DC - 2.0 GHz
Rev. V2
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macomtech.com
for additional data sheets and product information.
据外媒报道,萨里大学(University of Surrey)的研究人员开发出一种无需依赖GPS即可在人口密集的城市地区精确定位设备位置的人工智能系统。该系统可将定位误差从734米缩小到22米以内,这对于自动驾驶汽车和救援车辆等技术的发展意义重大。 图片来源: 萨里大学 在发表于《IEEE Robotics and Automation Letters》的论文中,研究人员介绍了PEn...[详细]