HBL1009
Advance Information
1-Channel ESD Protector
Product Description
The HBL1009 provides robust ESD protection for sensitive parts
that may be subjected to electrostatic discharge (ESD). The tiny form
factor means it can be used in very confined spaces. The electrical
‘back−to−back Zener’ configuration provides symmetrical ESD
protection in cases where nodes with AC signals are present. This
device is designed and characterized to safely dissipate ESD strikes of
at least
±3
kV, according to the MIL−STD−883 (Method 3015)
specification for Human Body Model (HBM) ESD.
Features
http://onsemi.com
ELECTRICAL SCHEMATIC
AuSn (Gold−Tin)
on Topside
(Signal Node)
AuSn (Gold−Tin)
on Topside
(Reference Node)
•
Compact Die Protects from ESD Discharges
•
Almost no Conduction at Signal Amplitudes less than
±4
V
•
ESD Protection to over
±8
V Contact Discharge per
MIL_STD_883 International ESD Standard
•
These Devices are Pb−Free and are RoHS Compliant
Applications
•
LED Lighting
•
Modules
•
Interface Circuits
Silicon Substrate on Backside
Table 1. ORDERING INFORMATION
†
Part Numbering Information
Ordering Part Number
HBL1009−RP
Topside Metal
Gold−Tin (AuSn)
Back Metal
None (Si Substrate)
BG Thickness
4 mils
Inking?
No
Shipping Method
Die on tape in ring−pack
NOTE: Contact your sales representative for other ordering options.
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
©
Semiconductor Components Industries, LLC, 2013
June, 2013
−
Rev. P1
1
Publication Order Number:
HBL1009/D
HBL1009
SPECIFICATIONS
Table 2. OPERATING CONDITIONS
Parameter
Operating Temperature Range
Storage Temperature Range
Rating
−40
to +130
−55
to +130
Units
°C
°C
Table 3. ELECTRICAL OPERATING CHARACTERISTICS
Symbol
I
LEAK
V
BD
V
ESD
Leakage Current
Parameter
Conditions
V =
±4
V, T = 25°C
V =
±7
V, T = 25°C
Breakdown Voltage
ESD Voltage Rating
Contact Discharge per Human Body Model,
MIL−STD−883 (Method 3015)
Capacitance
Temp Coefficient of BV
1. Per the standard, 3 positive and 3 negative strikes are applied, one second apart.
20 mA
T = 25°C
at
±20.0
mA
(Note 1)
±7.3
±8
Min
Typ
±0.1
±10
±8
Max
±1
±100
±8.9
Units
mA
mA
V
kV
C
T
50
1.0
pF
mV/K
MECHANICAL DETAILS
Table 4. MECHANICAL SPECIFICATIONS
(Note 2)
Symbol
Composition
Length (Sawn)
Width (Sawn)
Thickness
Top Pad Length
Top Pad Width
Top Pad Spacing
Top Pad Composition
Top Pad Thickness
Back Metal (Underside)
Value
Silicon Wafer,
P+ doped
466
446
4
350
111
109
AuSn (gold−tin)
24
±
10
None (silicon
substrate)
mm
mm
mm
mils
mm
mm
mm
Unit
2. Dimensions are typical values if tolerances are not specified.
http://onsemi.com
2
HBL1009
ON Semiconductor
and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone:
303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax:
303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email:
orderlit@onsemi.com
N. American Technical Support:
800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature:
http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
http://onsemi.com
3
HBL1009/D
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
