SPECIFICATION CONTROL DRAWING
TITLE
55A0112
Date
WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,
LIGHTWEIGHT, GENERAL PURPOSE, 600 VOLT
4-28-08
Revision
R
This specification sheet forms a part of the latest issue of Raychem Specification 55A.
CONDUCTOR - SILVER-COATED COPPER
INSULATION - RADIATION-CROSSLINKED,
MODIFIED ETFE
TABLE I. CONSTRUCTION DETAILS
PART NUMBER
1/
WIRE
SIZE
(AWG)
30
28
26
24
22
20
18
16
14
12
10
8
CONDUCTOR
STRANDING
(number x AWG)
7 x 38
7 x 36
19 x 38
19 x 36
19 x 34
19 x 32
19 x 30
19 x 29
19 x 27
37 x 28
37 x 26
133 x 29
DIAMETER OF
STRANDED
CONDUCTOR
(in.)
MINIMUM
55A0112-30-*
55A0112-28-*
55A0112-26-*
55A0112-24-*
55A0112-22-*
55A0112-20-*
55A0112-18-*
55A0112-16-*
55A0112-14-*
55A0112-12-*
55A0112-10-*
55A0112- 8-*
.011
.014
.018
.023
.029
.037
.046
.052
.065
.084
.106
.158
MAXIMUM
.012
.015
.019
.025
.030
.039
.048
.054
.068
.087
.112
.169
FINISHED WIRE
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft)
100.7
63.8
38.4
24.3
15.1
9.19
5.79
4.52
2.88
1.90
1.19
.658
DIAMETER
(in.)
.024 ± .002
.027 ± .002
.032 ± .002
.037 ± .002
.043 ± .002
.050 ± .002
.060 ± .002
.068 ± .002
.085 ± .003
.103 ± .003
.128 ± .006
.188 ± .008
MAXIMUM
WEIGHT
(lbs/1000 ft.)
.66
.91
1.4
2.0
2.8
4.3
6.5
8.3
13.0
19.7
32.3
60.5
TABLE II. PERFORMANCE DETAILS
BEND TESTING
PART NUMBER
1/
MANDREL DIAMETER
(inch) (± 3%)
IMMERSION,
LIFE CYCLE AND
ACCELERATED AGING
.250
.250
.375
.375
.500
.500
.500
.750
1.00
1.50
2.00
3.00
COLD
BEND
.375
.375
.500
.500
.750
.750
1.00
1.00
1.50
2.00
3.00
4.00
WEIGHT
(lb) (± 3%)
IMMERSION,
LIFE CYCLE AND
ACCELERATED AGING
.125
.125
.125
.250
.375
.500
.500
.750
1.00
1.50
1.50
4.00
COLD
BEND
.500
.500
.500
1.00
1.00
1.00
1.00
1.00
3.00
3.00
3.00
6.00
55A0112-30-*
55A0112-28-*
55A0112-26-*
55A0112-24-*
55A0112-22-*
55A0112-20-*
55A0112-18-*
55A0112-16-*
55A0112-14-*
55A0112-12-*
55A0112-10-*
55A0112- 8-*
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/
COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER. AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
The TE logo, Tyco Electronics and Raychem are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Fax: 1-650-361-6297
© 2008 Tyco Electronics Corporation. All rights reserved.
Page 1 of 2
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
SPECIFICATION CONTROL DRAWING
Page 2 of 2
Revision
R
SCD Number
55A0112
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
ACCELERATED AGING (CROSSLINKING PROOF): 300 ± 3°C for 7 hours
BLOCKING: 230 ± 3°C for 24 hours
COLOR: white preferred
CONCENTRICITY: 70% (minimum)
FLAMMABILITY: Procedure1, 3 seconds (maximum); 3 in. (maximum); no flaming of facial tissue
HUMIDITY RESISTANCE: Insulation Resistance,
5000 megohms for 1000 ft. (minimum) for AWG 30 - 10
3000 megohms for 1000 ft. (minimum) for AWG 8
IDENTIFICATION, COLOR STRIPING AND BAND DURABILITY:
125 cycles (250 strokes) (minimum), 500 g weight
IMMERSION: Diameter increase 5% (maximum); no cracking, no dielectric breakdown
INSULATION ELONGATION AND TENSILE STRENGTH:
Elongation, 75% (minimum)
Tensile Strength, 5000 lbf/in
2
(minimum)
INSULATION FLAWS:
Spark Test, 5.7 kV (rms) at 3 kHz
Impulse DielectricTest, 8.0 kV (peak)
INSULATION RESISTANCE:
5000 megohms for 1000 ft. (minimum) fro AWG 30 - 10
3000 megohms for 1000 ft. (minimum) fro AWG 8
INSULATION THICKNESS: 0.005 in. (minimum)
LIFE CYCLE: 230 ± 3°C for 500 hours
LOW TEMPERATURE-COLD BEND: -65 ± 3°C for 4 hours
SHRINKAGE: 230 ± 3°C for 6 hours, 0.125 in. (maximum) in 12 in.
SOLDERABILITY: Per MIL-STD-202, Method 208, without steam aging, N/A for AWG 10 and 8
SMOKE TEST: 250 ± 5°C. No visible smoke
SURFACE RESISTANCE: 500 megohms-in. (minimum), both readings
THERMAL SHOCK RESISTANCE: 200 ± 3°C,
0.060 in. (maximum) for AWG 30 - 12
0.100 in. (maximum) for AWG 10 - 8
VOLTAGE WITHSTAND TEST (Post Environmental): 2500 volts (rms), 60 Hz
WRAP TEST: 313 ± 3°C for 2 hours
PART NUMBER:
The "*" in the part numbers on page 1 shall be replaced by a color code designator.
1/
Example: AWG 22, white: 55A0112-22-9
AWG 22, white with black stripe: 55A0112-22-90
1/
See footer section on page 1
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
