SN74LS109A
Dual JK Positive
Edge-Triggered Flip-Flop
The SN74LS109A consists of two high speed completely
independent transition clocked JK flip-flops. The clocking operation
is independent of rise and fall times of the clock waveform. The JK
design allows operation as a D flip-flop by simply connecting the J and
K pins together.
http://onsemi.com
MODE SELECT – TRUTH TABLE
INPUTS
OPERATING MODE
S
D
Set
Reset (Clear)
*Undetermined
Load “1” (Set)
Hold
Toggle
Load “0” (Reset)
*
L
H
L
H
H
H
H
C
D
H
L
L
H
H
H
H
J
X
X
X
h
l
h
l
K
X
X
X
h
h
l
l
Q
H
L
H
H
q
q
L
Q
L
H
H
L
q
q
H
OUTPUTS
LOW
POWER
SCHOTTKY
16
1
Both outputs will be HIGH while both S
D
and C
D
are LOW, but the output
states are unpredictable if S
D
and C
D
go HIGH simultaneously.
H, h = HIGH Voltage Level
L, I = LOW Voltage Level
X = Don’t Care
l, h (q) = Lower case letters indicate the state of the referenced input
i, h (q) =
(or output) one set-up time prior to the LOW to HIGH clock transition.
16
PLASTIC
N SUFFIX
CASE 648
1
GUARANTEED OPERATING RANGES
Symbol
V
CC
T
A
I
OH
I
OL
Parameter
Supply Voltage
Operating Ambient
Temperature Range
Output Current – High
Output Current – Low
Min
4.75
0
Typ
5.0
25
Max
5.25
70
– 0.4
8.0
Unit
V
°C
mA
mA
SOIC
D SUFFIX
CASE 751B
ORDERING INFORMATION
Device
SN74LS109AN
SN74LS109AD
Package
16 Pin DIP
16 Pin
Shipping
2000 Units/Box
2500/Tape & Reel
©
Semiconductor Components Industries, LLC, 1999
1
December, 1999 – Rev. 6
Publication Order Number:
SN74LS109A/D
SN74LS109A
PACKAGE DIMENSIONS
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751B–05
ISSUE J
–A–
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
MILLIMETERS
MIN
MAX
9.80
10.00
3.80
4.00
1.35
1.75
0.35
0.49
0.40
1.25
1.27 BSC
0.19
0.25
0.10
0.25
0
_
7
_
5.80
6.20
0.25
0.50
INCHES
MIN
MAX
0.386
0.393
0.150
0.157
0.054
0.068
0.014
0.019
0.016
0.049
0.050 BSC
0.008
0.009
0.004
0.009
0
_
7
_
0.229
0.244
0.010
0.019
16
9
–B–
1
8
P
8 PL
0.25 (0.010)
M
B
S
G
F
K
C
–T–
SEATING
PLANE
R
X 45
_
M
D
16 PL
M
J
0.25 (0.010)
T B
S
A
S
DIM
A
B
C
D
F
G
J
K
M
P
R
ON Semiconductor
and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
North America Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone:
303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax:
303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email:
ONlit@hibbertco.com
N. American Technical Support:
800–282–9855 Toll Free USA/Canada
EUROPE:
LDC for ON Semiconductor – European Support
German Phone:
(+1) 303–308–7140 (M–F 2:30pm to 5:00pm Munich Time)
Email:
ONlit–german@hibbertco.com
French Phone:
(+1) 303–308–7141 (M–F 2:30pm to 5:00pm Toulouse Time)
Email:
ONlit–french@hibbertco.com
English Phone:
(+1) 303–308–7142 (M–F 1:30pm to 5:00pm UK Time)
Email:
ONlit@hibbertco.com
ASIA/PACIFIC:
LDC for ON Semiconductor – Asia Support
Phone:
303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong 800–4422–3781
Email:
ONlit–asia@hibbertco.com
JAPAN:
ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–8549
Phone:
81–3–5487–8345
Email:
r14153@onsemi.com
Fax Response Line:
303–675–2167
800–344–3810 Toll Free USA/Canada
ON Semiconductor Website:
http://onsemi.com
For additional information, please contact your local
Sales Representative.
http://onsemi.com
4
SN74LS109A/D
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
