SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights nor the rights of others. SONIX products are not designed, intended, or authorized for us as components in systems intended, for surgical
implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SONIX product
could create a situation where personal injury or death may occur. Should Buyer purchase or use SONIX products for any such unintended or
unauthorized application. Buyer shall indemnify and hold SONIX and its officers, employees, subsidiaries, affiliates and distributors harmless against
all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use even if such claim alleges that SONIX was negligent regarding the design or manufacture of
the part.
SONiX TECHNOLOGY CO., LTD
Revision 1.94
SN8P1600
8-bit micro-controller
AMENDENT HISTORY
Version
VER 1.90
VER 1.91
VER 1.92
Date
Sep. 2002
Sep. 2002
Oct. 2002
Description
V1.9 first issue
Correct some V1.9 typing errors
1. Correct some template code errors
2. Modify description of code option
3. Modify approval form section
4. Modify description of TC1 timer and add more explanation about PWM function
VER 1.93
Feb. 2003
1. Extend chip operating temperature from “0°C ~ +70°C” to “-20°C ~ +70°C”.
2. Change the description of ADD M,A instruction from “M
M+A” to “M
A+M”
3. Change “ACC can’t be access by “B0MOV” instruction” to “ACC can’t be access by
“B0MOV” instruction during the instant addressing mode”.
4. Correct the description of STKn.
5. Correct the bit definition of INTEN register.
6. Correct the description of “TC1 CLOCK FREQUENCY OUTPUT” section.
7. Correct an error of template code: “b0bclr FWDRST”
8. Add a notice about OSCM register access cycle.
9. Correct the table of “STANDARD ELECTRICAL CHARACTERISTICS”.
VER 1.94
Sep. 2003
1. Add new section about checksum calculate must avoid 04H~07H
2. Reserved Last 16 word ROM addresses
3. Remove register bit description
4. Modify TC0M description.
5. Modify TC1M description.
6. Modify PWM description
7. Modify slow mode current.
8. Change code option to chapter2
9. Adjust Electrical characteristic page
10. Remove approval sheet.
11. Remove PCB layout notice section.
12. Modify the description of INTRQ register.
“b0bset FWDRST”.
SONiX TECHNOLOGY CO., LTD
Revision 1.94
SN8P1600
8-bit micro-controller
Table of Content
AMENDENT HISTORY ............................................................................................................................... 2
FEATURES .................................................................................................................................................... 9
SYSTEM BLOCK DIAGRAM.................................................................................................................... 10
WORKING REGISTERS............................................................................................................................. 25
Y, Z REGISTERS....................................................................................................................................... 25
R REGISTERS........................................................................................................................................... 26
PROGRAM FLAG ....................................................................................................................................... 27
SONiX TECHNOLOGY CO., LTD
Page 3
Revision 1.94
SN8P1600
8-bit micro-controller
CARRY FLAG ........................................................................................................................................... 27
ZERO FLAG ............................................................................................................................................. 27
POWER DOWN MODE ........................................................................................................................... 47
SYSTEM MODE CONTROL...................................................................................................................... 48
SYSTEM MODE SWITCHING ................................................................................................................. 49
WAKEUP TIME .......................................................................................................................................... 50
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
