电子工程世界电子工程世界电子工程世界

关键词

搜索

型号

搜索

21003MSTFD

产品描述SLIDE DIP SWITCH-3SWITCHES, SPST, LATCHED,0.05A, 24VDC, THROUGH HOLE-STRAIGHT, ROHS COMPLIANT
产品类别机电产品    开关   
文件大小208KB,共2页
制造商CTS
标准
下载文档 详细参数 全文预览

21003MSTFD概述

SLIDE DIP SWITCH-3SWITCHES, SPST, LATCHED,0.05A, 24VDC, THROUGH HOLE-STRAIGHT, ROHS COMPLIANT

21003MSTFD规格参数

参数名称属性值
是否无铅不含铅
是否Rohs认证符合
包装说明ROHS COMPLIANT
Reach Compliance Codeunknow
主体宽度6.68 mm
主体高度3.77 mm
主体长度或直径9.09 mm
最大触点电流(直流)0.05 A
触点(直流)最大额定R负载.05A@24VDC
最大触点电压(直流)24 V
电气寿命1000 Cycle(s)
JESD-609代码e4
制造商序列号210
安装特点THROUGH HOLE-STRAIGHT
开关段数量3
最高工作温度85 °C
最低工作温度-40 °C
包装方法TUBE
密封BOTTOM SEALED; TOP TAPE SEALED
表面贴装NO
开关动作LATCHED
开关功能SPST
开关类型SLIDE DIP SWITCH
端子面层GOLD
端接类型SOLDER
Base Number Matches1

文档预览

下载PDF文档
Series 209/210 AUTO-DIP
®
®
AUTO-DIP
®
Switch
Automatically
Insertable, Wave
Solderable, Board
Washable DIP Switch
Features
Optimized Mechanical Features
• Fully sealed to withstand insertion shock,
wave solder temperatures, and board washing
• Positive detent seperated from contactor
• Compatible with Amistar, DynaPert,
Universal, NETCO assembly and other machines
Optimized Contact System
• Redundant, wiping contact
• Contactor does not deflect during actuation
• Available low profile, medium and extended height
actuator
Materials
• Series 209 - gold plated beryllium copper contacts
• Series 210 - gold flash plated beryllium copper contacts
• High housing heat deflection temperature assures
contact and seal integrity after wave soldering
• All plastics rated UL 94 V-0
• RoHS compliant
Series 209 – Premium AUTO-DIP Switches
Series 210 – Economical AUTO-DIP Switches
Switch Function
SPST- 2 through 10 and 12 positions
Switch Contact Resistance
Switch Series
209
210
Initial, max.
25 milliohms
100 milliohms
Electrical and Mechanical Specifications
Allowable Wave Solder Time
Up to 5 seconds with 260°C solder
Vibration
Per MIL-STD-202F, method 204D, condition B
(.06" or 15 G’s between 10 HZ to 2K Hz) with no
contact inconsistencies greater than 1 microsecond.
Shock
Per MIL-STD-202F, method 213B, condition A
(50 G’s) with no contact inconsistencies greater
than 1 microsecond.
Sealing
Standard bottom seal
Optional top tape seal
Operating Temperature
–40°C to +85°C
Packaging
Standard : Anti-Static tube packaging
End of life, max.
50 millohms
500 millohms
Insulation Resistance
1,000 megohms minimum between
insulated terminals
Dielectric Strength
500 VDC minimum for 1 minute between adjacent
switches
Nonswitching Rating
100 mA or 50 VDC maximum
Switch Capacitance
5 pF maximum between adjacent closed switches
Actuation Life
Series 209: 2,000 cycles switching @ 100 mA,
20 VDC or @ .1 mA, 5 VDC (dry circuit)
Series 210: 1,000 cycles switching @ 100 mA,
20 VDC or @ .1 mA, 5 VDC (dry circuit)
1-2
CTS Electronic Components
© 2006 CTS Corporation. All rights reserved. Information subject to change.
6/30/06
www.ctscorp.com
两年后打算换工作,但是却有着深深的恐惧感,求指导?
万能的论坛给予一些善意的答复,谢谢! 先稍微介绍一下楼主的情况:2012年楼主毕业,到现在为止刚好两年。在这里顺便记录自己在公司的发展历程。实习就在目前的公司,从刚 ......
廖欧亚大陆 工作这点儿事
STM32F769建工程模板+流水灯
本帖最后由 ihalin 于 2016-12-10 23:55 编辑 来建个自己喜欢的风格的工程。顺便搞个流水灯检验一下。 271193 271195 点灯代码: void led_init(void) { /* user ......
ihalin stm32/stm8
关于launchpad上p1.3按键
我想用P1.3按键实现中断控制P1.0led的闪烁,也就是按一下P1.3按键P1.0led就闪烁一下,我用的是g2553,下面是我自己的代码,完全不好用, WDTCTL=WDTPW+WDTHOLD;//停止看门狗 P1REN|=BIT3; P1O ......
junggle 微控制器 MCU
如何改变系统默认的声音输出设备?
我的ce下有2个声卡,系统启动后每次默认选择设备1作为waveout,如何改成设备2?...
031005 嵌入式系统
听说铁路上的两条铁轨是用来发送信号的,真的是这样吗?
在此请教诸位,听说铁路上的两条铁轨是用来发送信号的,真的是这样吗? ...
chilezhima 模拟电子
电子设计中的滤波器原理与应用
滤波器作用 1、将有用信号与噪声分离。 2、抑制不关心的频率成分,提高信号的分析精度。 滤波器的分类 根据所通过信号的频段,滤波器可分为低通、高通、带通和带阻滤波器。 1、低通滤波 ......
qwqwqw2088 模拟与混合信号

 
EEWorld订阅号

 
EEWorld服务号

 
汽车开发圈

 
机器人开发圈

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程 索引文件: 1587  2904  615  1621  1023  45  25  22  56  54 

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved