NOMC
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor,
Narrow Body, Surface Mount Network
FEATURES
• Standard 14 pins and 16 pins counts
(0.150" narrow body) JEDEC MS-012
variation AB and AC
• Rugged molded case construction
• Excellent long term ratio stability
(R ± 0.015 %)
• Low TCR tracking ± 5 ppm/°C
• Isolated and bussed schematics
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
Available
Available
Actual Size
The NOMC series features a standard 14 pins and 16 pins
narrow body (0.150") small outline surface mount style. It
can accommodate resistor networks to your particular
application requirements. The networks can be constructed
with passivated nichrome (standard), or tantalum nitride
(1)
resistor films to optimize performance.
Note
(1)
Available
upon request. Resistance value range and
performance differs from passivated nichrome standard
electrical specifications on datasheet, consult factory
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
25
ABSOLUTE
0.10
TRACKING
5
RATIO
0.05
SCHEMATICS
NOMC1401 or NOMCT1401
NOMC1601 or NOMCT1601
NOMC1403 or NOMCT1403
NOMC1603 or NOMCT1603
The 01 circuit provides a choice of 13 or 15 equal value
resistors each connected between a common lead (14 or
16). Custom schematics available.
The 03 circuit provides a choice of 7 or 8 equal value
resistors (14 or 16). Custom schematics available.
STANDARD RESISTANCE OFFERING
(Equal Value Resistors)
ISOLATED (03) SCHEMATIC
1 k
2 k
5 k
10 k
20 k
25 k
50 k
100 k
Note
• Consult factory for additional values
Revision: 25-Apr-17
Document Number: 60007
1
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
BUSSED (01) SCHEMATIC
1 k
5 k
10 k
20 k
NOMC
www.vishay.com
Vishay Dale Thin Film
SPECIFICATIONS
Passivated nichrome (standard)
Tantalum nitride (available upon request)
14, 16
100
to 50 k each resistor (bussed (01) schematic)
CONDITIONS
-
-
-
-
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
-
P
x
R
-
-
-
-
-
1 year at + 25 °C
1 year at + 25 °C
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
100
to 100 k each resistor (isolated (03) schematic)
± 25 ppm/°C (standard)
± 5 ppm/°C (typical)
± 0.10 % to ± 1 %
± 0.025 % to ± 0.1 %
100 mW ((typical) (03) schematic)
50 mW ((01) schematic)
400 mW/500 mW
R
± 0.05 %
R
± 0.015 %
< 0.1 ppm/V
100 V max. not to exceed
- 55 °C to + 125 °C
- 55 °C to + 150 °C
- 30 dB
0.08 μV/°C
R
± 0.01 %
R
± 0.002 %
DIMENSIONS AND IMPRINTING
in inches and millimeters
DIMENSION
H
H E
Index Area
PIN 1 Locator
14
INCHES
0.235
0.154
0.340
0.063
0.050
0.015
0.008
0.025
0.006
0.015
MILLIMETERS
5.969
3.911
8.363
1.60
1.270
0.381
0.203
0.635
0.152
0.381
INCHES
0.235
0.154
0.390
0.063
0.050
0.015
0.008
0.025
0.006
0.015
16
MILLIMETERS
5.969
3.91
9.906
1.60
1.270
0.381
0.203
0.635
0.152
0.381
E
O
A
e
O
C
e
B
L
A
1
h x 45°
A
B
C
L
A1
h
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Body
Terminals
Lead (Pb)-free Option
Tin Lead Option
Tin Lead and Lead (Pb)-free Finish
Passivated nichrome
Silicon
Molded epoxy
Copper alloy
100 % matte tin
Sn90
Plated
Note
• Available upon request. Resistance value range and performance differs from passivated nichrome standard electrical specifications on
datasheet, consult factory
Revision: 25-Apr-17
Document Number: 60007
2
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
NOMC
www.vishay.com
Vishay Dale Thin Film
ORDERING INFORMATION CHECK LIST
(Customs)
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Reference by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
MECHANICAL
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: NOMC16031002BUF
N
N
O
O
M
M
C
C
T
1
1
6
4
0
0
3
3
1
1
0
0
0
0
2
3
B
Z
U
T
F
1
GLOBAL MODEL
(4 or 5 digits)
NOMC
(Tin Lead)
NOMCT
(Lead (Pb)-free)
(e3)
PINS
14
16
SCHEMATIC
01
= 13 or 15
bussed
equal value
resistors
03
= 7 or 8
isolated
equal value
resistors
RESISTANCE
First 3 digits are
significant figures
and the last digit
specifies the number
of zeros to follow.
Example:
1002 = 10K
1003 = 100K
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
A
= 0.1 %
(1)
B
= 0.1 %
C
= 0.25 %
D
= 0.5 %
F
= 1 %
Z
= 0.1 %
(1)
Ratio
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
0.025 %
PACKAGING
TAPE AND REEL
T0
= 100 min., 100 mult
T1
= 1000 min., 1000 mult
(2)
T3
= 300 min., 300 mult
T5
= 500 min., 500 mult
TF
= Full reel 2500
TS
= 100 min., 1 mult
UF
= TUBED
Historical Part Number example: NOMC16031002Z (for reference purposes only)
NOMC
SERIES
Notes
(1)
Tolerance available 1K and up
(2)
Preferred packaging code
16
PINS
03
SCHEMATIC
1002
RESISTANCE
Z
TOLERANCE AND
RATIO TOLERANCE
Revision: 25-Apr-17
Document Number: 60007
3
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
实时操作系统RTOS
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
