PEG SERIES
PAGE ONE OF THREE
3,1675,3+($'(5
FEATURES
MATE-RITE TIP prevents scraping of mating socket
Insulator standoffs reduce rework due to flux residue
High profile for easy mating access
Rounded tails improve solder action
Mates with Crane’s ATP, ATS Sockets; JUN jumpers
SINGLE ROW (1 to 40 Positions)
STANDARD PART DIMENSIONS
MATING
P
POST “A”
SINGLE ROW
0.295" / 7,49mm
DUAL ROW
0.295" / 7,49mm
INSULATOR BODY
W
H
S
WIDTH
HEIGHT
STANDOFF
SINGLE ROW
0.096" / 2,44mm
0.098" / 2,49mm
0.015" / 0,38mm
DUAL ROW
0.198" / 5,03mm
0.098" / 2,49mm
0.015" / 0,38mm
DUAL ROW (2 to 80 Positions)
PC TAIL
L
LENGTH
SINGLE ROW
0.125" / 3,18mm
DUAL ROW
0.125" / 3,18mm
For other lengths, see Selected Options (next page)
POST CENTERLINE HEIGHT (Above PC Board)
SINGLE ROW
C
CENTERLINE
0.235" / 5,97mm
DUAL ROW
0.235" / 5,97mm
MATERIALS
INSULATOR BODY
POST
Glass Filled Polyester (UL94V-O)
Phosphor Bronze
OPTIONAL HOLD-DOWN PEGS
Crane’s Patented hold-down pegs (top and bottom entry available) secure the
part to the PC board preventing misalignment during handling or soldering.
See section on HOLD-DOWN PEGS for more information. NOTE: Hold-
down peg not available on triple row parts.
'(6&$SSURYHG3URGXFWV
(Defense Electronics Supply Center)
See SPECIFICATIONS and PERFORMANCE DATA for more detail
SAMPLE HOTLINE: 1-800-676-7644
CRANE CONNECTORS
• 4700 Smith Road • Cincinnati, Ohio 45212 USA • E-mail Address: info@craneconnectors.com
Phone: (513) 631-4700 • Fax (513) 631-5700 • Toll Free US (800) 676-7644 • Canada (800) 420-7310
PEG SERIES
0.100" (2,54mm) Centers
To Mate With 0.025" (0,64mm)
Square Mating Posts
PAGE TWO OF THREE
HOW TO ORDER CRANE’S PEG SERIES
STANDARD PART NUMBER
--
OPTIONAL
PRODUCT SERIES
See page below for insulator options
TOTAL NUMBER OF POSITIONS
PEG
SINGLE
DUAL
01-40
02-80
NUMBER OF ROWS
SINGLE
DUAL
S
D
Contact factory for information on triple row version.
TYPE OF HEADER
RIGHT ANGLE
R
PLATING (See Specs At Bottom Of Page)
G,T or M, H, L, F
NOTE: Some platings may be subject to minimums
MATING POST DATA
Mating Post Length
0.295" / 7,49mm
Minimum Gold Plated
Area
0.200" / 5,08mm
M
TAIL (O.125" / 3,18mm STANDARD)
COINED
KINKED
FINE LINE*
SQUARE
0.028" / 0,71mm Diagonal
0.028" / 0,71mm Diagonal
0.018" / 0,46mm Diagonal
0.025" / 0,64mm SQ
R
K
F
Q
* The FINE LINE option is not available in all pin lengths.
SELECTED OPTIONS
INSULATOR OPTIONS:
The standard color of our PEG SERIES insulator is white. For a black insulator, add a “B”
(EX: BPEG) to the beginning of the standard part number. For HIGH TEMP plastic (only
available in black), add a “G” (EX: GPEG) to the standard part number.
POST
0.295"
M
0.295"
TAIL
0.185"
0.325"
T
T
1
3
8
2
5
5
DESIGN NOTE
Crane’s FINE LINE PC tail option answers demands for economies of space in PCB design. By choosing our
FINE LINE tail option, the hole size for the header can be reduced allowing more traces between the pins. This
eases the routing of traces and often eliminates the need for additional layers.
FINE LINE INFO
Mating Post
Fine Line Tail
Recommended Hole Size
0.025" Square
0.018" Diameter
0.025" ± 0.003"
NOTE:
A Crane FINE LINE tail may be just the solution when a PC board comes in out-of-spec.
SAMPLE HOTLINE: 1-800-676-7644
CRANECONNECTORS
• 4700 Smith Road • Cincinnati, Ohio 45212 USA • E-mail Address: info@craneconnectors.com
Phone: (513) 631-4700 • Fax (513) 631-5700 • Toll Free US (800) 676-7644 • Canada (800) 420-7310
CRANE CONNECTORS - PLATING SPECIFICATIONS
PLATING OPTIONS
CONTACT AREA
Inches (Millimeters)
15
” (0,00038) Gold
100
” (0,00254) Tin / Lead
50
” (0,00127) Gold
30
” (0,00076) Gold
10
” (0,00025) Gold
3
” (0,00008) Gold
PC TAIL
Inches (Millimeters)
100
” (0,00254) Tin/Lead - Min
100
” (0,00254) Tin/Lead - Min
100
” (0,00254) Tin/Lead - Min
100
” (0,00254) Tin/Lead - Min
100
” (0,00254) Tin/Lead - Min
100
” (0,00254) Tin/Lead - Min
UNDERPLATE
Inches (Millimeters)
50
” (0,00127) Nickel - Min.
50
” (0,00127) Nickel - Min.
50
” (0,00127) Nickel - Min.
50
” (0,00127) Nickel - Min.
50
” (0,00127) Nickel - Min.
50
” (0,00127) Nickel - Min.
G
T
M
H
L
F
Selective
Tin / Lead
Selective
Selective
Selective
Selective
STANDARD TAIL OPTIONS ON 0.100" (2,54mm) PIN STRIP HEADERS
STANDARDS
ISO9001
“R”
COINED
The standard “R”
option provides a
coined tail improving
solder action while
ma k i n g i n s e r tio n
easier.
“K”
KINKED
The “K” option
provides a kinked tail,
reducing unwanted
movement on the PC
board.
“F”
FINE
The “F” option
combines an 0.018"
rounded tail with an
0.025" square post.
This fine line feature
allows more traces
between holes.
“Q”
SQUARE
The “Q” option
provides an 0.025"
square tail for use in
w i r e
w r a p
applications.
UL File No. E120111 (N)
Crane Connectors
File No. A-3620
Recognized to U.S. and
Canadian requirements
under the Component
Recognition Program of
Underwriters Laboratories
Inc.
Registered by UL to ISO9001
under UL’s accreditation by
Raad voor de Certificatie
(RvC), the Dutch Council for
Certification.
ENGINEERING NOTE: The information presented in this catalog page is accurate to the best of our knowledge. Due to ongoing efforts to advance
design and material performance, the information is subject to change without notice.
SAMPLE HOTLINE: 1-800-676-7644
CRANE CONNECTORS
• 4700 Smith Road • Cincinnati, Ohio 45212 USA • E-mail Address: info@craneconnectors.com
Phone: (513) 631-4700 • Fax (513) 631-5700 • Toll Free US (800) 676-7644 • Canada (800) 420-7310
ARM技术
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
