LPC11U3x
32-bit ARM Cortex-M0 microcontroller; up to 128 kB flash; up
to 12 kB SRAM and 4 kB EEPROM; USB device; USART
Rev. 2 — 25 November 2013
Product data sheet
1. General description
The LPC11U3x are an ARM Cortex-M0 based, low-cost 32-bit MCU family, designed for
8/16-bit microcontroller applications, offering performance, low power, simple instruction
set and memory addressing together with reduced code size compared to existing 8/16-bit
architectures.
The LPC11U3x operate at CPU frequencies of up to 50 MHz.
Equipped with a highly flexible and configurable full-speed USB 2.0 device controller, the
LPC11U3x brings unparalleled design flexibility and seamless integration to today’s
demanding connectivity solutions.
The peripheral complement of the LPC11U3x includes up to 128 kB of flash memory, up
to 12 kB of SRAM data memory and 4 kB EEPROM, one Fast-mode Plus I
2
C-bus
interface, one RS-485/EIA-485 USART with support for synchronous mode and smart
card interface, two SSP interfaces, four general purpose counter/timers, a 10-bit ADC,
and up to 54 general purpose I/O pins.
The I/O Handler is a software library-supported hardware engine that can be used to add
performance, connectivity and flexibility to system designs. It is available on the
LPC11U37HFBD64/401. The I/O Handler can emulate serial interfaces such as UART,
I
2
C, and I
2
S with no or very low additional CPU load and can off-load the CPU by
performing processing-intensive functions like DMA transfers in hardware. Software
libraries for multiple I/O Handler applications are available on
http://www.LPCware.com.
2. Features and benefits
System:
ARM Cortex-M0 processor, running at frequencies of up to 50 MHz.
ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC).
Non-Maskable Interrupt (NMI) input selectable from several input sources.
System tick timer.
Memory:
Up to 128 kB on-chip flash program memory with sector (4 kB) and page erase
(256 byte) access.
4 kB on-chip EEPROM data memory; byte erasable and byte programmable;
on-chip API support.
Up to 12 kB SRAM data memory.
16 kB boot ROM.
NXP Semiconductors
LPC11U3x
32-bit ARM Cortex-M0 microcontroller
In-System Programming (ISP) and In-Application Programming (IAP) via on-chip
bootloader software.
ROM-based USB drivers. Flash updates via USB supported.
ROM-based 32-bit integer division routines.
Debug options:
Standard JTAG (Joint Test Action Group) test interface for BSDL (Boundary Scan
Description Language).
Serial Wire Debug.
Digital peripherals:
Up to 54 General Purpose I/O (GPIO) pins with configurable pull-up/pull-down
resistors, repeater mode, and open-drain mode.
Up to 8 GPIO pins can be selected as edge and level sensitive interrupt sources.
Two GPIO grouped interrupt modules enable an interrupt based on a
programmable pattern of input states of a group of GPIO pins.
High-current source output driver (20 mA) on one pin.
High-current sink driver (20 mA) on true open-drain pins.
Four general purpose counter/timers with a total of up to 8 capture inputs and 13
match outputs.
Programmable Windowed WatchDog Timer (WWDT) with a dedicated, internal
low-power WatchDog Oscillator (WDO).
Analog peripherals:
10-bit ADC with input multiplexing among eight pins.
Serial interfaces:
USB 2.0 full-speed device controller.
USART with fractional baud rate generation, internal FIFO, a full modem control
handshake interface, and support for RS-485/9-bit mode and synchronous mode.
USART supports an asynchronous smart card interface (ISO 7816-3).
Two SSP controllers with FIFO and multi-protocol capabilities.
I
2
C-bus interface supporting the full I
2
C-bus specification and Fast-mode Plus with
a data rate of up to 1 Mbit/s with multiple address recognition and monitor mode.
I/O Handler for hardware emulation of serial interfaces and DMA; supported through
software libraries. (LPC11U37HFBD64/401 only.)
Clock generation:
Crystal Oscillator with an operating range of 1 MHz to 25 MHz (system oscillator).
12 MHz high-frequency Internal RC oscillator (IRC) that can optionally be used as
a system clock.
Internal low-power, low-frequency WatchDog Oscillator (WDO) with programmable
frequency output.
PLL allows CPU operation up to the maximum CPU rate with the system oscillator
or the IRC as clock sources.
A second, dedicated PLL is provided for USB.
Clock output function with divider that can reflect the crystal oscillator, the main
clock, the IRC, or the watchdog oscillator.
Power control:
Integrated PMU (Power Management Unit) to minimize power consumption during
Sleep, Deep-sleep, Power-down, and Deep power-down modes.
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
LPC11U3X
Product data sheet
Rev. 2 — 25 November 2013
2 of 76
NXP Semiconductors
LPC11U3x
32-bit ARM Cortex-M0 microcontroller
Power profiles residing in boot ROM provide optimized performance and minimized
power consumption for any given application through one simple function call.
Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep
power-down.
Processor wake-up from Deep-sleep and Power-down modes via reset, selectable
GPIO pins, watchdog interrupt, or USB port activity.
Processor wake-up from Deep power-down mode using one special function pin.
Power-On Reset (POR).
Brownout detect with up to four separate thresholds for interrupt and forced reset.
Unique device serial number for identification.
Single 3.3 V power supply (1.8 V to 3.6 V).
Temperature range
40 C
to +85
C.
Available as LQFP64, LQFP48, TFBGA48, and HVQFN33 packages.
3. Applications
Consumer peripherals
Medical
Industrial control
Handheld scanners
USB audio devices
4. Ordering information
Table 1.
Ordering information
Package
Name
LPC11U34FHN33/311
LPC11U34FBD48/311
LPC11U34FHN33/421
LPC11U34FBD48/421
LPC11U35FHN33/401
LPC11U35FBD48/401
LPC11U35FBD64/401
LPC11U35FHI33/501
LPC11U35FET48/501
LPC11U36FBD48/401
LPC11U36FBD64/401
LPC11U37FBD48/401
LPC11U37HFBD64/401
LPC11U37FBD64/501
HVQFN33
LQFP48
HVQFN33
LQFP48
HVQFN33
LQFP48
LQFP64
HVQFN33
TFBGA48
LQFP48
LQFP64
LQFP48
LQFP64
LQFP64
Description
plastic thermal enhanced very thin quad flat package; no leads; 33
terminals; body 7
7
0.85 mm
plastic low profile quad flat package; 48 leads; body 7
7
1.4 mm
plastic thermal enhanced very thin quad flat package; no leads; 33
terminals; body 7
7
0.85 mm
plastic low profile quad flat package; 48 leads; body 7
7
1.4 mm
plastic thermal enhanced very thin quad flat package; no leads; 33
terminals; body 7
7
0.85 mm
plastic low profile quad flat package; 48 leads; body 7
7
1.4 mm
plastic thermal enhanced very thin quad flat package; no leads; 33
terminals; body 5
5
0.85 mm
Version
n/a
SOT313-2
n/a
SOT313-2
n/a
SOT313-2
n/a
Type number
plastic low profile quad flat package; 64 leads; body 10
10
1.4 mm SOT314-2
plastic thin fine-pitch ball grid array package; 48 balls; body 4.5
4.5 SOT1155-2
0.7 mm
plastic low profile quad flat package; 48 leads; body 7
7
1.4 mm
plastic low profile quad flat package; 48 leads; body 7
7
1.4 mm
SOT313-2
SOT313-2
plastic low profile quad flat package; 64 leads; body 10
10
1.4 mm SOT314-2
plastic low profile quad flat package; 64 leads; body 10
10
1.4 mm SOT314-2
plastic low profile quad flat package; 64 leads; body 10
10
1.4 mm SOT314-2
LPC11U3X
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 2 — 25 November 2013
3 of 76
NXP Semiconductors
LPC11U3x
32-bit ARM Cortex-M0 microcontroller
4.1 Ordering options
Table 2.
Ordering options
USB SRAM in kB
EEPROM in kB
ADC channels
Total
SRAM in kB
[1]
Type number
SRAM0 in kB
Flash in kB
SRAM1 in kB
I
2
C-bus FM+
USB device
I/O Handler
LPC11U34FHN33/311
LPC11U34FBD48/311
LPC11U34FHN33/421
LPC11U34FBD48/421
LPC11U35FHN33/401
LPC11U35FBD48/401
LPC11U35FBD64/401
LPC11U35FHI33/501
LPC11U35FET48/501
LPC11U36FBD48/401
LPC11U36FBD64/401
LPC11U37FBD48/401
LPC11U37HFBD64/401
LPC11U37FBD64/501
[1]
[2]
40
40
48
48
64
64
64
64
64
96
96
128
128
128
4
4
4
4
4
4
4
4
4
4
4
4
4
4
8
8
8
8
8
8
8
8
8
8
8
8
8
8
-
-
2
2
2
2
2
2
2
2
2
2
2
2
-
-
-
-
-
-
-
2
[1]
2
[1]
-
-
-
2
[2]
2
[1]
8
8
10
10
10
10
10
12
12
10
10
10
10
12
no
no
no
no
no
no
no
no
no
no
no
no
yes
no
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8
8
8
8
8
8
8
8
8
8
8
8
8
8
26
40
26
40
26
40
54
26
40
40
54
40
54
54
For general-purpose use.
For I/O Handler use only.
LPC11U3X
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 2 — 25 November 2013
4 of 76
GPIO pins
USART
SSP
NXP Semiconductors
LPC11U3x
32-bit ARM Cortex-M0 microcontroller
5. Block diagram
SWD, JTAG
XTALIN XTALOUT
RESET
LPC11U3x
TEST/DEBUG
INTERFACE
SYSTEM OSCILLATOR
IRC, WDO
BOD
POR
PLL0
USB PLL
CLOCK
GENERATION,
POWER CONTROL,
SYSTEM
FUNCTIONS
CLKOUT
ARM
CORTEX-M0
system bus
slave
EEPROM
4 kB
FLASH
40/48/64/96/128 kB
slave
SRAM
8/10/12 kB
slave
ROM
16 kB
slave
master
slave
USB DEVICE
CONTROLLER
USB_DP
USB_DM
USB_VBUS
USB_FTOGGLE,
USB_CONNECT
GPIO ports 0/1
HIGH-SPEED
GPIO
IOH_[20:0]
I/O
HANDLER
(3)
master
AHB-LITE BUS
slave
AHB TO APB
BRIDGE
USART/
SMARTCARD INTERFACE
10-bit ADC
I
2
C-BUS
16-bit COUNTER/TIMER 0
SSP0
16-bit COUNTER/TIMER 1
32-bit COUNTER/TIMER 0
32-bit COUNTER/TIMER 1
SYSTEM CONTROL
WINDOWED WATCHDOG
TIMER
PMU
SSP1
IOCON
SCK0, SSEL0,
MISO0, MOSI0
SCK1, SSEL1,
MISO1, MOSI1
AD[7:0]
SCL, SDA
RXD
TXD
DCD, DSR
(1)
, RI
(1)
CTS, RTS, DTR
SCLK
CT16B0_MAT[2:0]
CT16B0_CAP[1:0]
(2)
CT16B1_MAT[1:0]
CT16B1_CAP[1:0]
(2)
CT32B0_MAT[3:0]
CT32B0_CAP[1:0]
(2)
CT32B1_MAT[3:0]
CT32B1_CAP[1:0]
(2)
GPIO pins
GPIO pins
GPIO pins
GPIO INTERRUPTS
GPIO GROUP0 INTERRUPTS
GPIO GROUP1 INTERRUPTS
002aag345
(1) Not available on HVQFN33 packages.
(2) CT16B0_CAP1, CT16B1_CAP1 available on LQFP64 packages only; CT32B0_CAP1 available on TFBGA48, LQFP48, and
LQFP64 packages only; CT32B1_CAP1 available in TFBGA48/LQFP64 packages only.
(3) LPC11U37HFBD64/401 only.
Fig 1.
Block diagram
LPC11U3X
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 2 — 25 November 2013
5 of 76
瑞萨MCU/MPU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
