Philips Semiconductors
Product specification
I-CODE Long range reader
module hardware
CONTENTS
1
2
3
4
5
6
6.1
6.2
6.3
6.4
6.5
7
7.1
7.1.1
7.1.2
7.1.3
7.1.4
7.1.5
7.2
7.3
7.3.1
7.3.1.1
7.3.1.2
7.3.1.3
7.3.1.4
7.3.1.5
7.3.1.6
7.3.2
7.3.2.1
7.3.2.2
7.4
7.5
7.6
7.6.1
7.6.2
FEATURES
APPLICATIONS
GENERAL DESCRIPTION
ORDERING INFORMATION
BLOCK DIAGRAM
PINNING
Antenna connector
Serial interface connector
Power supply connector
Switches
PCB connector
FUNCTIONAL DESCRIPTION
System overview
I-CODE labels
Host
I/O ports
Antenna
Power supply
Reader software
Reader hardware
RF board
Voltage regulation
Clock generator
Modulator and transmitter amplifier
Modulation index and RF power regulation
Receiver, filter, demodulator, and ADC
Opto-couplers
Microcontroller board
Microcontroller
RS232 interface
Printed circuit boards
EMC and EMI
Safety and reliability considerations
Antenna rupture and antenna short-circuit
Supply voltage
8
9
10
11
11.1
11.2
12
13
14
15
LIMITING VALUES
SLRM900
ELECTRICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
APPLICATION INFORMATION
Jumper settings
Hints for system integration
REFERENCE DOCUMENTS
DATA SHEET STATUS
DEFINITIONS
DISCLAIMERS
2002 May 24
2
Philips Semiconductors
Product specification
I-CODE Long range reader
module hardware
1
FEATURES
SLRM900
•
24 V DC power supply
•
13.56 MHz carrier frequency
•
RS232 serial interface, 115.2 or 57.6 kbaud data rate
•
Regulated RF output power, software adjustable from
2 up to 10 W at 50
Ω
•
Software adjustable modulation index from 10% to 20%
•
Firmware upgradable via RS232 interface
•
Programmable input and output ports (optional)
•
Electronic Article Surveillance (EAS) stand-alone mode
(EAS output signal optional)
•
Anticollision capability
•
Support of both standard and fast mode
•
BundesAmt fuer Post und Telekommunikation (BAPT)
and Federal Communications Commission (FCC)
approval
•
CE compliant.
2
APPLICATIONS
Optional input and output ports, and an RS232 interface
offer the possibility to connect the unit to a microcontroller
or PC.
The SLRM900 is designed to access all types of labels and
transponders that are based on the I-CODE1 label IC.
Read and write functionality is included, as well as
sophisticated ways to use the anticollision capability of
I-CODE.
High emphasis is put on long range functionality, which
makes the SLRM900 suitable for gate antennas and
tunnel reader applications. In order to provide the
appropriate output power level for various types of
connected antennas, the output power may be adjusted,
using simple software configuration commands.
Many reference installations with high demands on
anticollision, reading range, and data reliability in noisy
environments, have proven the capability of both the
reader module and the I-CODE1 label IC.
This document describes the reader hardware, interface,
and connection of the antenna.
•
Long range reading appliances in I-CODE
(1)
systems.
3
GENERAL DESCRIPTION
Generally, the SLRM900 can communicate with smart
labels based on Philips I-CODE1 label IC SL1ICS3001.
It consists of a 2-way communication transmitter and
receiver, for generating, transmitting, receiving, and
processing identification signals.
(1) I-CODE - is a trademark of Koninklijke Philips Electronics N.V.
4
ORDERING INFORMATION
PART NUMBER
NAME
I-CODE Long range reader module
ORDERING CODE (12NC)
9352 623 27122
SLRM900/AFB
2002 May 24
3
Philips Semiconductors
Product specification
I-CODE Long range reader
module hardware
6
PINNING
6.3
Power supply connector
See Fig.4 for front view of connector
SYMBOL
+24VDC
GND
SLRM900
The locations of the connectors and switches are shown
in Fig.9.
6.1
Antenna connector
ST3 in Fig.8.
SYMBOL
ANT
GND
DESCRIPTION
antenna input and output; BNC female
antenna ground
DESCRIPTION
power supply voltage; DC-jack (∅ 2.1 mm)
power supply ground
handbook, halfpage
GND
handbook, halfpage
GND
+
24VDC
MGW309
ANT
MGW308
Fig.4 Power supply connector.
Fig.2 Antenna connector.
6.4
Switches
See Fig.5 for front view of switches.
SYMBOL
RST
DESCRIPTION
Resets the SLRM900. By resetting the
SLRM900, all programmable parameters
will be preset to their default values
described in data sheet:
"SLRM900 I-CODE
Long Range Reader Module, protocol
Reader-Host",
except for stored RF output
power and modulation index. The SLRM900
will restart with the mode selected by jumper
JP3 (see Table 3).
Non Maskable Interrupt. To change from the
default start-up mode to the alternative
mode (see setting of jumper JP3 in Table 3).
For switching back to default start-up mode,
press switch RST (SW1).
6.2
Serial interface connector
ST2 in Fig.8; see Fig.3 for front view of connector.
SYMBOL
I/O
TxD
RxD
I/O
GND
I/O
I/O
I/O
RFU
PIN
1
2
3
4
5
6
7
8
9
output
input
internally connected for DCE
ground
internally connected for DCE
internally connected for DCE
internally connected for DCE
ready for use
DESCRIPTION
internally connected for DCE
NMI
handbook, halfpage
5
1
handbook, halfpage
SW1 (RST)
SW2 (NMI)
9
6
MGW310
MGW311
Fig.3 RS232 connector D-sub.
Fig.5 Switches SW1 and SW2.
2002 May 24
5
电子竞赛
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
