UM10878
PN7120 NFC Controller SBC Kit User Manual
Rev. 1.0 — 19 May 2015
318510
User manual
COMPANY PUBLIC
Document information
Info
Content
Keywords
Abstract
OM5577, PN7120, Demo kit, Raspberry Pi, BeagleBone
This document is the user manual of the PN7120 NFC Controller SBC kit
NXP Semiconductors
UM10878
PN7120 NFC Controller SBC Kit User Manual
Revision history
Rev
Date
1.0
20150519
Description
First release
Contact information
For more information, please visit:
http://www.nxp.com
UM10878
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2015. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.0 — 19 May 2015
318510
2 of 25
NXP Semiconductors
UM10878
PN7120 NFC Controller SBC Kit User Manual
1. Introduction
The present document describes the OM5577/PN7120S demonstration kit, a flexible and
easy-to-use Single Board Computer (SBC) Kit for the PN7120 NFC Controller.
It contains a PN7120 NFC Controller Board, a Raspberry Pi Interface Board, a
BeagleBone Interface Board, as well as an NFC Forum Type 2 Tag in form of a MIFARE
UL Card. It enables the development of an NFC solution based on PN7120 in a Linux or
Android environment.
PN7120 is a full NFC controller solution with integrated firmware and NCI interface
designed for contactless communication at 13.56 MHz.
This document presents first an overview of the kit.
Then, it gives printed circuit boards details.
Finally, it provides information for reuse of the kit in different environments.
UM10878
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2015. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.0 — 19 May 2015
318510
3 of 25
NXP Semiconductors
UM10878
PN7120 NFC Controller SBC Kit User Manual
2. Overview
2.1 Kit description
OM5577/PN7120S kit is a high performance fully NFC compliant expansion board for
both Raspberry Pi (refer to [1] for more details) and BeagleBone (refer to [2] for more
details). It meets compliance with Reader mode, P2P mode and Card emulation mode
standards. The board features an integrated high performance RF antenna to insure high
interoperability level with NFC devices.
2.2 Kit content
The kit is composed of 3 printed circuit boards and a MIFARE Ultralight EV1 card.
UM10878
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2015. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.0 — 19 May 2015
318510
4 of 25
NXP Semiconductors
UM10878
PN7120 NFC Controller SBC Kit User Manual
PN7120 NFC
Controller Board
BeagleBone
Interface Board
Raspberry Pi
Interface Board
Fig 1.
PN7120NFC Controller SBC Kit content
2.2.1 PN7120 NFC Controller Board
The PN7120 NFC Controller Board is the main board of the demonstration kit. It embeds
the PN7120 and all related circuitry.
It also include an on-board RF antenna with related matching circuitry.
This main board has to be used in association with one of the 2 interface boards
depending of the target user environment (Raspberry Pi or BeagleBone).
For this purpose it integrates dedicated connectors allowing boards assembly.
UM10878
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2015. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.0 — 19 May 2015
318510
5 of 25
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
