695 series
features
• Ø12.7mm mounting
• Low profile, smoked lens styling
• Sunlight readable LEDs
• Sealed to IP67
• Flying lead terminations available
• Internal reverse protection diode fitted as standard
• Pack Quantity = 10 Pieces
• Natural anodised aluminium
specifications
Typical characteristics (Ta = 25°C)
Part
Number
695-501-21
695-521-21
695-930-21
695-501-23
695-521-23
695-532-23
695-997-23
Colour
Red
Yellow
Blue
Red
Yellow
Green
White
Voltage
Vac/dc
12 Vdc
12 Vdc
12 Vdc
24-28 Vdc
24-28 Vdc
24-28 Vdc
24-28 Vdc
Current
DC
(mA)
20
20
20
20
20
20
20
Luminous
Intensity
(mcd)
600
600
9870
600
600
800
27000
Wave
Length
(nm)
630
585
465
630
585
515
* See below
Operating
Temp.
(°C)
-40 - +80
-40 - +80
-30 - +85
-40 - +80
-40 - +80
-40 - +80
-30 - +85
Storage
Temp.
(°C)
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
De-rating
Graphs
D
D
U
D
D
F
I
997F-C
x
y
*Typical emission colour White
0.31
0.32
-
-
-
-
-
-
^ = Voltage for 20mA product is Vf at 20mA, not Vopr
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 3.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
- Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch
to order
to order please contact us on: t:
+44 (0)1229 582 430
f:
+44 (0)1229 585 155
e:
sales@marl.co.uk
w:
www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 695 - version 2013-12-03-173622
page 1 of 5
high performance panel lamps
695 series
technical data
Header
3
29
6
+ On rear of
header denotes
anode
+0.1
12.7 0
17
2.80
Mounting Hole
Dimensions in mm (typical)
Not to scale
Anode termination denoted by red indicator
Mounting hole to be clean and burr free
housing material
Body
Nut
Panel Seal
Fresnel Lens
Encapsulation
Lock Washer
Termination
Header
push on connectors
Natural Anodised Aluminium
Natural Anodised Aluminium
Viton
Polycarbonate
PC5430 Resin
Spring Steel
925-000-00 is brass tin plated - for use
with 695 series lamps
Brass to BS2874 CZ108 Copper Flash Base, Silver Flash Finish
Dimensions in mm (typical). Not to scale.
Nylon 6 A82
technical characteristics
Series
695
Max. Power
Dissipation
825
Max. Reverse
Voltage
1000^
Panel Cutout
12.7
Nut Mounting
Torque
1.0
Min. Mounting
Centres
19.5
Max. Panel
Thickness
2.0 - 10.0
units
mW
Vdc
mm
Nm
mm
mm
* = Current Version
^ = Voltage Version
optional flying lead terminations
Order Code
Suffix
19
Supply
Voltage
DC products
Wire
Colour
Red-anode/ Black-cathode
Wire
Length
1000mm
No/Diameter
of Conductor
19/0.15mm
Diameter
Insulation
1.2mm
Comments
Customised
lengths
available
to order
to order please contact us on: t:
+44 (0)1229 582 430
f:
+44 (0)1229 585 155
e:
sales@marl.co.uk
w:
www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 695 - version 2013-12-03-173622
page 2 of 5
695 series
de-rating information
Derating Graph D
55
50
45
40
35
55
50
Derating Graph F
55
50
45
40
35
Derating Graph I
Forward Current IF (mA)
Forward Current IF (mA)
40
35
30
25
20
15
10
5
0
0.0
20.0
40.0
60.0
80.0
100.0
Forward Current IF (mA)
45
30
25
20
15
10
5
0
0.0
20.0
40.0
60.0
80.0
100.0
30
25
20
15
10
5
0
0.0
20.0
40.0
60.0
80.0
8.5
100.0
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
Derating Graph U
55
50
45
40
35
Forward Current IF (mA)
30
25
20
15
10
5
0
0.0
20.0
40.0
60.0
80.0
100.0
8.5
Ambient Temperature Ta (°C)
also available
Part numbers also available in the 695 series:
Part
Colour
Number
695-501-20-15
695-501-21-52
695-501-22-50
695-501-22-52
695-501-25-50
695-501-25-52
695-501-25-54
695-501-75
695-501-76
695-509-22
695-509-75
695-521-22-51
695-521-23-50
695-521-25-50
695-521-25-52
695-521-25-53
Red
Red
Red
Red
Red
Red
Red
Red
Red
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Vopr
5/6 Vdc
12 Vdc
24 Vdc
24 Vdc
110 Vdc
110 Vdc
110 Vdc
110 Vac 50 Hz
230 Vac 50 Hz
24 Vdc
110 Vac 50 Hz
24 Vdc
28 Vdc
110 Vdc
110 Vdc
110 Vdc
Number
695-521-58
695-521-58-19
695-521-72
695-521-74
695-521-75
695-521-76
695-532-21-50
695-532-22-50
695-532-25-50
695-532-25-52
695-532-41-50
695-532-52-50
695-532-58
695-532-58-19
695-532-75
695-532-76
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Voltage
Part
Colour
Vopr
70 Vdc
70 Vdc
24 Vac 50 Hz
48 Vac 50 Hz
110 Vac 50 Hz
230 Vac 50 Hz
12 Vdc
24 Vdc
110 Vdc
110 Vdc
8 Vdc
5 Vdc
70 Vdc
70 Vdc
110 Vac 50 Hz
230 Vac 50 Hz
Number
695-906-75
695-930-21-50
695-930-22-50
695-930-23
Yellow
Blue
Blue
Blue
Voltage
Part
Colour
Vopr
110 Vac 50 Hz
12 Vdc
24 Vdc
28 Vdc
Voltage
The products listed here illustrate all of
the options available to order. These
products may have custom modifications
that alter their operation beyond the
generic information contained within this
datasheet. Please contact sales for
further information.
* = These products do not contain
integral resistors
to order
to order please contact us on: t:
+44 (0)1229 582 430
f:
+44 (0)1229 585 155
e:
sales@marl.co.uk
w:
www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 695 - version 2013-12-03-173622
page 3 of 5
695 series
also available continued
Part
Colour
Number
695-930-25
695-930-25-50
695-930-41-50
695-930-52-50
695-997-72
695-997-74
695-997-76
Blue
Blue
Blue
Blue
White
White
White
Vopr
110 Vdc
110 Vdc
8 Vdc
5 Vdc
24 Vac 50 Hz
48 Vac 50 Hz
230 Vac 50 Hz
Voltage
to order
to order please contact us on: t:
+44 (0)1229 582 430
f:
+44 (0)1229 585 155
e:
sales@marl.co.uk
w:
www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 695 - version 2013-12-03-173622
page 4 of 5
695 series
design considerations
Electro-Static Discharge (ESD)
Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of
possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual
situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood
that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and
assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing
technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have
changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and
despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015.
Power De-Rating
The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is
operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the
ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address
these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be
specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, please refer
to the de-rating graphs for correct operation. Marl accept no liability for any product that is operated higher than the stated
voltage.
to order
to order please contact us on: t:
+44 (0)1229 582 430
f:
+44 (0)1229 585 155
e:
sales@marl.co.uk
w:
www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 695 - version 2013-12-03-173622
page 5 of 5
瑞萨MCU/MPU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
