TRC-100 Series–Fixed Output and Dimmable
100W Switch Mode Constant Current LED Drivers,
Damp & Wet Location Rated
Electrical Specifications
Input Voltage Range:
Frequency:
Power Factor:
Input Current:
Inrush Current:
Maximum Power:
THD:
Line Regulation:
Load Regulation:
Leakage Current:
Typical Efficiency:
Turn-on Time Delay:
Protection:
100-277 Nom. Vac (90-305 V Min/Max)
50/60 Hz Nom. (47-63 Hz Min/Max)
>0.90 @ 75-100% load, 100-277V
1.30 A @ 100 Vac
65 A @ 230Vac 25º Cold Start
100W
< 20% @ 75-100% load, 100-277V
_
± 1%
± 3%
1 mA @ 277Vac
90-91% typical @ maximum load
2.0S max @ 120V, 1.2S max @ 220V
Over-Voltage, Over-Current, Over-Temperature (100ºC),
Output Short Circuit Protection with Self Recovery
Environmental Specifications
Minimum Starting Temp:
Maximum Case Temp.
Storage Temperature:
Humidity:
Cooling:
Sound Rating:
MTBF:
Lifetime:
Weight:
-35ºC
ST: 90°C, DT: 89.5°C
-40ºC to +85ºC
10% to 100%
Convection
Class A
250,000 Hours @ 120Vac, 80% load, 25ºCambient,
per MIL-HDBK-217F
75,000 Hours @ 220Vac, 80% load, 25ºC
2.20 lbs (1000g)
• Total Power: 100 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP67
• Ultra-high Efficiency
• High Power Factor with Active Correction
• Output and Lightning Protection
Constant Current - Product Specifications
Model Number
TRC-100S035ST
TRC-100S045ST
TRC-100S070ST
TRC-100S105ST
TRC-100S140ST
TRC-100S175ST
TRC-100S210ST
TRC-100S245ST
TRC-100S280ST
TRC-100S315ST
TRC-100S357ST
TRC-100S420ST
Output Current
(mA ±5%)
350
450
700
1050
1400
1750
2100
2450
2800
3150
3570
4200
Output Voltage
Range
(Vdc)
172-286
132-222
86-143
57-95
43-71
34-57
29-48
25-41
22-36
19-32
17-28
14-24
Max. Output
Power
(W)
100
100
100
100
100
100
100
100
100
100
100
100
Typical
Efficiency
92%
92%
91%
91%
91%
91%
91%
91%
90%
90%
90%
90%
Output current is adjustable at the factory from 50-100%
Dimming - Product Specifications
Model Number
TRC-100S035DT
TRC-100S045DT
TRC-100S070DT
TRC-100S105DT
TRC-100S140DT
TRC-100S175DT
TRC-100S210DT
Output Current
(mA ±5%)
350
450
700
1050
1400
1750
2100
2450
2800
3150
3570
4200
Output Voltage
Range
(Vdc)
172-286
132-222
86-143
57-95
43-71
34-57
29-48
25-41
22-36
19-32
17-28
14-24
Max. Output
Power
(W)
100
100
100
100
100
100
100
100
100
100
100
100
Typical
Efficiency
91%
91%
90.5%
90.5%
90.5%
90.5%
90.5%
90.5%
90%
90%
90%
90%
E332160
TRC-100S245DT
TRC-100S280DT
TRC-100S315DT
TRC-100S357DT
TRC-100S420DT
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 9-1-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
TRC-100 Series
SSL Solutions Faster Than The Speed Of Light
®
Pg 2 of 3
Dimming:
Input
Black (L)
White (N)
Green (GND)
50±5
15±2
650±20
Ø7.8±0.2
221
194
190
210±20
45±5
35±5
25±5
50±5
Red (+)
Black (-)
5±1
Dimming
36.5
Yellow (10V)
Purple (0-10V)
Green (GND)
67.5
15±2
36.5
67.5
Output
230±20
36.5
10.5
5
8
50
34
5
208
205
Ø8.9±0.2
WIRE SPECS:
AC Input:
UL SJTW, 18AWG
DC Output:
UL STW, 18AWG
Dimming Control:
UL2464, 22AWG
Ø4.2±0.2
Fixed:
Input
Black (L)
White (N)
Green (GND)
50±5
15±2
650±20
Ø7.8±0.2
221
194
190
Output
Ø8.9±0.2
Red (+)
Black (-)
230±20
36.5
10.5
5
8
50
34
5
208
205
WIRE SPECS:
AC Input:
UL SJTW, 18AWG
DC Output:
UL STW, 18AWG
Safety and EMC Compliance
CUL
CE
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61547
UL 8750, UL1012, CSA-C22.2 No. 107.1
EN 61347-1, EN61347-2-13
Conducted emission
Harmonic current emissions
Voltage fluctuations and flicker
Electrostatic discharge
RFE Field Susceptibility test
Electrical Fast Transient
Surge Immunity Test, AC Power Line:
line to line 4 kV; line to earth 6 kV
Conducted Radio Frequency
Power Frequency Magnetic Field Test
Electromagnetic Immunity
20
0
100
80
Derating Curve
15±2
50±5
150
135
120
105
90
75
60
45
30
15
0
Lifetime / Case Temperature
60
40
90
120
150
Input Voltage
(V)
180
210
240
270
300
330
Lifetime
(kHrs)
Load
(%)
30
40
Case Temperature
(°C)
50
60
70
80
90
EN 61000-4-11 Voltage Dips
1.00
0.95
0.90
Power Factor / Output Voltage
25%
20%
15%
10%
THD / Output Voltage
120Vac
220Vac
277Vac
PF
0.80
0.75
0.70
0.65
0.60
60%
70%
80%
120Vac
220Vac
277Vac
90%
100%
PF
0.85
5%
70%
Normalized Output Current
60%
Normalized Output Current
70%
80%
90%
100%
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
TRC-100 Series
SSL Solutions Faster Than The Speed Of Light
®
Pg 3 of 3
Dimming Control Details
Vcc
10V output source current
Absolute maximum voltage on the 0-10V input pin
Source current on 0-10V input pin
Value of Rin (the resistor inside the LED driver which
locate between the 1-10V input and 10V output pin)
Parameters
Minimum
9.5 V
0 mA
-2 V
0 mA
Typical
10 V
—
—
—
Maximum
10.5 V
10 mA
12 V
0.5 mA
20.2 K
19.8 K
20 K
Option 1 - DC Input
Rin
Output Current / Dimming Voltage
Normalized Output Current
10V Output (Yellow)
100%
Vcc
1-10V Input (Purple)
1-10Vdc V
Dim (Green)
80%
60%
40%
20%
0%
TRC-100SxxxxDT
0
2
4
Vdim
(V)
6
8
10
Option 2 - External Resistor
Vcc
Rin
10V Output (Yellow)
Normalized Output Current
(Vcc=12V)
Output Current
/ Rx
100%
80%
60%
40%
20%
0%
1-10V Input (Purple)
Rx
Dim (Green)
TRC-100SxxxxDT
0
10
20
Rx
(kΩ)
30
40
50
Option 3 - External Resistor
Vcc
Rin
10V Output (Yellow)
Normalized Output Current
(Vcc=15V)
Output Current
/ Rx
100%
80%
60%
40%
20%
0%
1-10V Input (Purple)
Rx
Dim (Green)
TRC-100SxxxxDT
0
6
12
Rx
(kΩ)
18
24
30
Notes:
1. If the dimming function is not used, the dimming leads should be floated.
2. Io is actual output current and Ir is rated current without dimming control.
3. For the driver to operate properly, the load voltage must be maintained above the minimum voltage threshold
(approx. 60% of the max. output voltage for any given model).
4. If the output voltage is maintained above 60% of the maximum output voltage, the dimming control may
be operated over the entire 1-10V range with output current varying from 100% down to practically 10%.
5. The dimming signal is allowed to be less than 1V; however, for 0-1V, the output current can maintain about 10% Ir.
For 8.5-10V, the output current can maintain about 100%Ir.
6. Do not connect the dimming GND to the output; otherwise, the LED driver cannot work normally.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
