Si4010-DK
Si4010 D
EVELOPMENT
K
I T
U
SER
’
S
G
UIDE
1. Key Fob Development Platform
The Si4010 key fob development platform is a flexible platform for comfortably developing software and testing the
whole system using the Silicon Laboratories software development IDE. The platform also allows programming of
the NVM on chip. The kit has three versions: one for the 434 MHz band (P/N 4010-KFOBDEV-434), one for the
868 MHz band (P/N 4010- KFOBDEV-868) and one for the 915 MHz band (P/N 4010-KFOBDEV-915).
1.1. Kit Content
Table 1. Kit Content
Qty
Part Number
4010-KFOBDEV-434
2
1
3
1
1
1
1
1
1
1
1
1
2
2
AAA
CRD2032
4010-KFOBDEV-868
2
1
3
1
1
4010-KFOB-868-NF
MSC-DKPE1
Si4010-C2-GS
4010-DKPB868-BM
4355-LED-868-SRX
4010-KFOB-434-NF
MSC-DKPE1
Si4010-C2-GS
4010-DKPB434-BM
4355-LED-434-SRX
MSC-PLPB_1
MSC-BA5
MSC-BA4
EC3
Toolstick_BA
MSC-DKCS5
Description
Si4010 Key Fob Development Kit 434 MHz
Si4010 key fob demo board 434 MHz w/o IC
SOIC/MSOP socketed development board
Si4010-C2-GS transmitter IC, SOIC Package
Si4010 MSOP key fob development board 434 MHz, SMA
Si4355 RFStick 434 MHz receiver board
Key Fob Plastic Case (translucent grey)
Programming interface board
Burning adapter board
USB Debug Adapter
Toolstick Base Adapter
USB Cable
USB extender cable (USBA-USBA)
AAA battery
CR2032 3 V coin battery
Si4010 Key Fob Development Kit 868 MHz
Si4010 key fob demo board 868 MHz w/o IC
SOIC/MSOP socketed development board
Si4010-C2-GS transmitter IC, SOIC Package
Si4010 MSOP key fob development board 868 MHz, SMA
Si4355 RFStick 868 MHz receiver board
Rev. 0.1 6/12
Copyright © 2012 by Silicon Laboratories
Si4010-DK
Si4010-DK
Table 1. Kit Content (Continued)
1
1
1
1
1
1
1
2
2
AAA
CRD2032
4010-KFOBDEV-915
2
1
3
1
1
1
1
1
1
1
1
1
2
2
AAA
CRD2032
4010-KFOB-915-NF
MSC-DKPE1
Si4010-C2-GS
4010-DKPB915-BM
4355-LED-915-SRX
MSC-PLPB_1
MSC-BA5
MSC-BA4
EC3
Toolstick_BA
MSC-DKCS5
MSC-PLPB_1
MSC-BA5
MSC-BA4
EC3
Toolstick_BA
MSC-DKCS5
Key Fob Plastic Case (translucent grey)
Programming interface board
Burning adapter board
USB Debug Adapter
Toolstick Base Adapter
USB Cable
USB extender cable (USBA-USBA)
AAA battery
CR2032 3 V coin battery
Si4010 Key Fob Development Kit 915 MHz
Si4010 key fob demo board 915 MHz w/o IC
SOIC/MSOP socketed development board
Si4010-C2-GS transmitter IC, SOIC Package
Si4010 MSOP key fob development board 915 MHz, SMA
Si4355 RFStick 915MHz receiver board
Key Fob Plastic Case (translucent grey)
Programming interface board
Burning adapter board
USB Debug Adapter
Toolstick Base Adapter
USB Cable
USB extender cable (USBA-USBA)
AAA battery
CR2032 3 V coin battery
2
Rev. 0.1
Si4010-DK
1.1.1. Burning Adapter (P/N MSC-BA4)
The programming interface board serves as an interface in between the debug adapter and the Socketed Key Fob
Development Board or the Development Key Fob. It provides 6.5 V for NVM programming. The power source is
activated by a sliding switch on the board. It is required when the user wants to program the internal NVM memory
on the chip.
The programming interface board contains an 8-pin header, to which GPIO0 to GPIO5, along with power and
ground, are connected from the development boards. Therefore, the user can tap to that header to control or
monitor the chip pins.
1.1.2. Si4010 Socketed Key Fob Development Board (P/N MSC-DKPE1)
Socketed (both SOIC and MSOP) key fob board with SMA connector.
Rev. 0.1
3
Si4010-DK
1.1.3. Si4010 MSOP Key Fob Development Board 434 MHz, SMA (P/N 4010-DKPB434-BM)
This development board has an unburned soldered Si4010, five push buttons, matched 50
SMA RF output,
battery clip, and battery switch. This board allows running user application from RAM during program development
even while board is disconnected and powered by the battery. The SMA output connector allows wired
measurements of the RF output signal.
Note:
Instead of this board, some 434 MHz development kits may contain the pcb antenna version of this board, described in
"1.2.2. Si4010 Key Fob Development Board 434 MHz" on page 7.
1.1.4. Si4355 RFStick 434MHz receiver board (P/N 4355-LED-434-SRX)
Receiver board factory programmed with the simple receiver program srx_demo. Can be used for link testing with
Si4010 programmed with the rke_demo.
1.1.5. Programming Interface Board (P/N MSC-BA5)
Adapter board for interfacing customer PCB to the debug adapter.
4
Rev. 0.1
Si4010-DK
1.1.6. 4010 Key Fob Demo Board 434 MHz without IC (P/N 4010-KFOB-434-NF)
1.1.7. Key Fob Plastic Case (translucent grey) (P/N MSC-PLPB_1)
1.1.8. Toolstick Base Adapter (P/N Toolstick_BA)
Debugging adapter compatible with Si4355 RFstick receiver board and the Si4010 development boards.
1.1.9. Si4010 sample, SOIC package (P/N Si4010-C2-GS)
1.1.10. USB Cable (P/N MSC-DKCS5)
Cable to connect EC3 Debug Adapter to PC.
Rev. 0.1
5
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
