199D
www.vishay.com
Vishay Sprague
Solid-Electrolyte T
ANTALEX
™ Capacitors,
Resin-Coated, Radial-Lead
FEATURES
• Terminations: tin / lead (SnPb), 100 % tin (Sn)
• Economy and high performance are combined
Available
in
these
radial-lead,
solid-electrolyte
T
ANTALEX
™ capacitors
Available
• Rugged, reliable capacitors featuring low
leakage current and low dissipation factor
• Six miniature case sizes and five lead styles. All case sizes
are available in standard tape and reel packaging per
EIA-468
• Standard ratings include replacements for type 196D
capacitors
• Lead (Pb)-free capacitors have “L” in body marking
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
APPLICATIONS
Suitable for a broad range of consumer, commercial and
industrial equipment
PERFORMANCE CHARACTERISTICS
Operating Temperature:
-55 °C to +85 °C
(to +125 °C with voltage derating)
Capacitance Tolerance:
at 120 Hz, +25 °C, ± 20 %,
± 10 % standard. ± 5 % available as special
Dissipation Factor:
at 120 Hz, +25 °C. Dissipation factor,
shall not exceed the values listed in the Standard Ratings
tables.
DC Leakage Current (DCL Max.):
at +25 °C:
leakage current shall not exceed the values listed
in the Standard Ratings tables.
at +85 °C:
leakage current shall not exceed 10 times the
values listed in the Standard Ratings tables.
at +125 °C:
leakage shall not exceed 15 times the values
listed in the Standard Ratings tables.
Life Test:
capacitors shall withstand rated DC voltage
applied at +85 °C for 1000 h with a circuit resistance not
greater than 3
.
Following the life test:
1. DCL shall not exceed 125 % of the initial requirements
2. Dissipation factor shall meet the initial requirement
3. Change in capacitance shall not exceed ± 10 %
ORDERING INFORMATION
199D
MODEL
475
CAPACITANCE
X9
CAPACITANCE
TOLERANCE
X0 = ± 20 %
X9 = ± 10 %
** X5 = ± 5 %
** Special Order
003
DC VOLTAGE RATING
AT +85 °C
This is expressed in V.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V).
A
CASE
CODE
See
Ratings
and
Case
Codes
table.
1
(1)
LEAD
STYLE
V1
PACKAGING
E3
RoHS
COMPLIANT
E3 = 100 %
tin termination
(RoHS compliant)
Blank = Tin / lead
termination
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
number of zeros to
follow.
Note
(1)
See lead styles table
V1 = Bulk
B1 = Tape and reel
A1 = Ammo
Revision: 14-Aug-2018
Document Number: 40020
1
For technical questions, contact:
tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
LEAD STYLE CONFIGURATIONS AND DIMENSIONS**
(LL = Lead Length)
EVEN LL
2, 4 and 5
D
+
+
“LONG/SHORT” LL
1, 3 and Y
D
H
3±1
H
L
P
“OUTSIDE HOCKEYSTICK”
6 and 7
D
“SNAP- IN”
9
D
“HAIRPIN” X, Z
6.35 max.
D
+
+
+
+
H
1
L
1.1 ± 0.05
P
+
+
H
L
H
L
P
H
1
L
P
P
(1) - WIRE DIAMETER (NOMINAL) 0.020" [0.51 mm]
AVAILABLE LEAD STYLES AND PACKAGING TYPES PER CASE SIZE
LEAD STYLE / CASE
A
B
C
D
E
F
Bulk
V1
1
2
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
Bulk / Reel
Ammo
3
4
5
Bulk
V1
Reel
B1
Ammo
A1
6
7
Bulk
V1
Reel
B1
Ammo
A1
9
Bulk
V1
Reel
B1
Ammo
A1
X
Bulk
V1
Reel
B1
Ammo
A1
Y
Z
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
DIMENSIONS
in inches [millimeters]
LEAD STYLE
CASE
D
max.
0.173
[4.40]
0.197
[5.00]
0.217
[5.50]
0.236
[6.00]
0.339
[8.60]
0.378
[9.60]
1, 2, 3, 4
P
± 0.024
[0.60]
H
max.
0.280
[7.11]
0.300
[7.62]
0.360
[9.14]
0.400
[10.16]
0.492
[12.50]
0.650
[16.50]
1, 3
L
min.
2, 4
L
± 0.118
[3.0]
P
± 0.03
[0.76]
5, Y
L
± 0.118
[3.0]
P
± 0.024
[0.60]
H
1
max.
0.378
[9.61]
0.398
[10.12]
0.458
[11.64]
0.498
[12.66]
0.591
[15.00]
0.748
[19.00]
6
L
A
B
C
D
E
F
0.100
[2.54]
0.125
[3.18]
0.591
[15.0]
0.748
[19.0]
0.748
[19.0]
0.200
[5.08]
0.240 ± 0.030
[6.1 ± 0.76]
-
-
-
-
0.200
[5.08]
1 ± 0.122
[25.4 ± 3.1]
Revision: 14-Aug-2018
Document Number: 40020
2
For technical questions, contact:
tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
DIMENSIONS
in inches [millimeters]
LEAD
STYLE
CASE
A
B
C
D
7, 9
D
max.
0.173
[4.40]
0.197
[5.00]
0.217
[5.50]
0.236
[6.00]
0.25
[6.35]
P
± 0.024
[0.60]
7
H
1
max.
0.378
[9.61]
0.398
[10.12]
0.458
[11.64]
0.498
[12.66]
0.240
[6.10]
0.200
[5.08]
L
± 0.03
[0.76]
P
± 0.024
[0.60]
9
H
1
max.
0.398
[10.11]
0.418
[10.62]
0.478
[12.14]
0.518
[13.16]
0.240
[6.10]
L
± 0.03
[0.76]
D
max.
0.173
[4.40]
0.197
[5.00]
0.217
[5.50]
0.236
[6.00]
H
max.
0.280
[7.11]
0.300
[7.62]
0.360
[9.14]
0.400
[10.16]
X, Z
H
1
max.
0.340
[8.64]
0.360
[9.14]
0.420
[10.67]
0.460
[11.68]
0.750
[19.05]
0.100
[2.54]
0.125
[3.175]
L
± 0.125
X
P
± 0.024
Z
P
± 0.024
Note
• Lead space measured within 0.05" [1.27 mm] of the body of the capacitor or from the bottom of the crimp
199D OBSOLETE VS. CURRENT ORDERING CROSS REFERENCE
OBSOLETE
A1
A1
A1
A6
A6
A1
A6
A6
A2
A7
A7
A2
B1
B6
B6
B2
B7
B7
E2
E7
E7
E3
E8
E8
E4
G2
G7
G7
9V1
9B1
9A1
NEW
1V1
3V1
2V1
2B1
2A1
4V1
4B1
4A1
5V1
5B1
5A1
YV1
XV1
XB1
XA1
ZV1
ZB1
ZA1
6V1
6B1
6A1
7V1
7B1
7A1
DESCRIPTION
0.100 SP, UNEVEN STRAIGHT LL, BULK CASES A - D
0.200 SP, UNEVEN STRAIGHT LL, BULK, CASES E, F
0.100 SP, EVEN STRAIGHT LL, BULK, CASES A - D
0.100 SP, EVEN STRAIGHT LL, REEL POSITIVE LEADER, CASES A - D
0.100 SP, EVEN STRAIGHT LL, AMMO, CASES A - D
0.200 SP, EVEN STRAIGHT LL, BULK, CASES E, F
0.200 SP, EVEN STRAIGHT LL, REEL POSITIVE LEADER, CASES E, F
0.200 SP, EVEN STRAIGHT LL, AMMO, CASES E, F
0.125 SP, EVEN STRAIGHT LL, BULK, CASES A - D
0.125 SP, EVEN STRAIGHT LL, REEL POSITIVE LEADER, CASES A - D
0.125 SP, EVEN STRAIGHT LL, AMMO, CASES A - D
0.125 SP, UNEVEN STRAIGHT LL, BULK, CASES A - D
0.100 SP, HAIRPIN LL, BULK CASES A - D
0.100 SP, HAIRPIN LL, REEL POSITIVE LEADER, CASES A - D
0.100 SP, HAIRPIN LL, AMMO, CASES A - D
0.125 SP, HAIRPIN LL, BULK, CASES A - D
0.125 SP, HAIRPIN LL, REEL POSITIVE LEADER, CASES A - D
0.125 SP, HAIRPIN LL, AMMO, CASES A - D
0.200 SP, HOCKEY STICK LL, BULK, CASES A - F
0.200 SP, HOCKEY STICK LL, REEL POSITIVE LEADER, CASES A - F
0.200 SP, HOCKEY STICK LL, AMMO, CASES A - F
0.250 SP, HOCKEY STICK LL, BULK, CASES A - D
0.250 SP, HOCKEY STICK LL, REEL POSITIVE LEADER, CASES A - D
0.250 SP, HOCKEY STICK LL, AMMO, CASES A - D
OBSOLETE
0.200 SP, SNAP-IN LL, BULK, CASES A - D
0.200 SP, SNAP-IN LL, REEL POSITIVE LEADER, CASES A - D
0.200 SP, SNAP-IN LL, AMMO, CASES A - D
Revision: 14-Aug-2018
Document Number: 40020
3
For technical questions, contact:
tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
120 Hz (%)
6
6
8
8
8
8
8
8
10
10
10
10
10
10
6
6
8
8
8
8
8
8
10
10
10
10
6
6
6
8
8
8
8
8
8
8
10
10
10
6
6
6
6
8
8
8
8
8
8
10
10
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
PART NUMBER
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
4.7
6.8
10
15
22
33
47
68
100
150
220
330
3.3
4.7
6.8
10
15
22
33
39
47
68
100
150
220
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
A
A
A
A
B
B
C
C
D
D
E
E
F
F
A
A
B
B
C
C
D
D
D
E
E
F
A
A
B
B
C
C
D
D
D
D
E
E
F
A
A
B
B
C
C
D
D
E
E
F
F
3 V
DC
AT +85 °C, SURGE = 3.6 V; 2 V
DC
AT +125 °C, SURGE = 2.4 V
199D475(1)003A(2)(3)
0.5
199D685(1)003A(2)(3)
0.5
199D106(1)003A(2)(3)
0.5
199D156(1)003A(2)(3)
0.5
199D226(1)003B(2)(3)
0.6
199D336(1)003B(2)(3)
1.0
199D476(1)003C(2)(3)
1.4
199D686(1)003C(2)(3)
2.0
199D107(1)003D(2)(3)
3.0
199D157(1)003D(2)(3)
4.0
199D227(1)003E(2)(3)
5.0
199D337(1)003E(2)(3)
6.0
199D477(1)003F(2)(3)
8.0
199D687(1)003F(2)(3)
10.0
6.3 V
DC
AT +85 °C, SURGE = 8 V; 4 V
DC
AT +125 °C, SURGE = 5 V
199D475(1)6R3A(2)(3)
0.5
199D685(1)6R3A(2)(3)
0.5
199D106(1)6R3B(2)(3)
0.6
199D156(1)6R3B(2)(3)
0.9
199D226(1)6R3C(2)(3)
1.3
199D336(1)6R3C(2)(3)
2.0
199D476(1)6R3D(2)(3)
2.9
199D686(1)6R3D(2)(3)
4.0
199D107(1)6R3D(2)(3)
5.0
199D157(1)6R3E(2)(3)
6.0
199D227(1)6R3E(2)(3)
7.0
199D337(1)6R3F(2)(3)
8.0
10 V
DC
AT +85 °C, SURGE = 13 V; 7 V
DC
AT +125 °C, SURGE = 9 V
199D335(1)010A(2)(3)
0.5
199D475(1)010A(2)(3)
0.5
199D685(1)010B(2)(3)
0.6
199D106(1)010B(2)(3)
1.0
199D156(1)010C(2)(3)
1.5
199D226(1)010C(2)(3)
2.0
199D336(1)010D(2)(3)
3.0
199D396(1)010D(2)(3)
3.9
199D476(1)010D(2)(3)
4.0
199D686(1)010D(2)(3)
5.0
199D107(1)010E(2)(3)
6.0
199D157(1)010E(2)(3)
7.0
199D227(1)010F(2)(3)
8.0
16 V
DC
AT +85 °C, SURGE = 20 V; 10 V
DC
AT +125 °C, SURGE = 12 V
199D225(1)016A(2)(3)
0.5
199D335(1)016A(2)(3)
0.5
199D475(1)016B(2)(3)
0.7
199D685(1)016B(2)(3)
1.0
199D106(1)016C(2)(3)
1.5
199D156(1)016C(2)(3)
2.4
199D226(1)016D(2)(3)
3.5
199D336(1)016D(2)(3)
4.0
199D476(1)016E(2)(3)
5.0
199D686(1)016E(2)(3)
6.0
199D107(1)016F(2)(3)
7.0
199D157(1)016F(2)(3)
8.0
Note
• Part number definitions:
(1) For capacitance tolerance: X0 = ± 20 %, X9 = ± 10 % or X5 = 5 %
(2) To specify lead style / spacing / packaging insert the last three characters in the part number. Use the appropriate code shown in the
Current Ordering Cross Reference table and explained in the Ordering Information and Lead Styles table
(3) E3 = RoHS-compliant 100 % tin leads. Blank or no suffix = standard tin / lead termination
Revision: 14-Aug-2018
Document Number: 40020
4
For technical questions, contact:
tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
120 Hz (%)
4
6
6
6
8
8
8
8
8
8
10
4
6
6
6
6
6
8
8
8
8
8
8
4
4
4
4
4
4
4
6
6
6
6
6
6
6
8
8
8
8
8
4
4
4
4
4
4
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
PART NUMBER
1.0
3.3
4.7
6.8
10
15
22
33
47
68
100
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
1.8
2.2
3.3
4.7
5.6
6.8
10
15
22
33
47
0.10
0.15
0.22
0.33
0.47
0.68
A
B
B
C
C
D
D
E
E
F
F
A
A
A
B
B
C
C
D
D
E
E
F
A
A
A
A
A
A
A
A
B
B
B
C
D
D
D
E
E
F
F
A
A
A
A
A
A
20 V
DC
AT +85 °C, SURGE = 26 V; 13 V
DC
AT +125 °C, SURGE = 16 V
199D105(1)020A(2)(3)
0.5
199D335(1)020B(2)(3)
0.8
199D475(1)020B(2)(3)
1.0
199D685(1)020C(2)(3)
1.5
199D106(1)020C(2)(3)
2.0
199D156(1)020D(2)(3)
2.5
199D226(1)020D(2)(3)
3.0
199D336(1)020E(2)(3)
4.0
199D476(1)020E(2)(3)
5.0
199D686(1)020F(2)(3)
6.0
199D107(1)020F(2)(3)
7.0
25 V
DC
AT +85 °C, SURGE = 33 V; 17 V
DC
AT +125 °C, SURGE = 21 V
199D105(1)025A(2)(3)
0.5
199D155(1)025A(2)(3)
0.5
199D225(1)025A(2)(3)
0.5
199D335(1)025B(2)(3)
0.8
199D475(1)025B(2)(3)
1.0
199D685(1)025C(2)(3)
1.5
199D106(1)025C(2)(3)
2.5
199D156(1)025D(2)(3)
3.0
199D226(1)025D(2)(3)
4.0
199D336(1)025E(2)(3)
5.0
199D476(1)025E(2)(3)
6.0
199D686(1)025F(2)(3)
7.0
35 V
DC
AT +85 °C, SURGE = 46 V; 23 V
DC
AT +125 °C, SURGE = 28 V
199D104(1)035A(2)(3)
0.5
199D154(1)035A(2)(3)
0.5
199D224(1)035A(2)(3)
0.5
199D334(1)035A(2)(3)
0.5
199D474(1)035A(2)(3)
0.5
199D684(1)035A(2)(3)
0.5
199D105(1)035A(2)(3)
0.5
199D155(1)035A(2)(3)
0.5
199D185(1)035B(2)(3)
0.7
199D225(1)035B(2)(3)
0.7
199D335(1)035B(2)(3)
1.0
199D475(1)035C(2)(3)
1.5
199D565(1)035D(2)(3)
1.9
199D685(1)035D(2)(3)
2.3
199D106(1)035D(2)(3)
3.5
199D156(1)035E(2)(3)
4.0
199D226(1)035E(2)(3)
5.0
199D336(1)035F(2)(3)
6.0
199D476(1)035F(2)(3)
7.0
50 V
DC
AT +85 °C, SURGE = 65 V; 33 V
DC
AT +125 °C, SURGE = 40 V
199D104(1)050A(2)(3)
0.5
199D154(1)050A(2)(3)
0.5
199D224(1)050A(2)(3)
0.5
199D334(1)050A(2)(3)
0.5
199D474(1)050A(2)(3)
0.5
199D684(1)050A(2)(3)
0.5
Note
• Part number definitions:
(1) For capacitance tolerance: X0 = ± 20 %, X9 = ± 10 % or X5 = 5 %
(2) To specify lead style / spacing / packaging insert the last three characters in the part number. Use the appropriate code shown in the
Current Ordering Cross Reference table and explained in the Ordering Information and Lead Styles table
(3) E3 = RoHS-compliant 100 % tin leads. Blank or no suffix = standard tin / lead termination
Revision: 14-Aug-2018
Document Number: 40020
5
For technical questions, contact:
tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
