ARINC 600
BKAD/E/F
BKAD/E/F
Low insertion force contacts.
Both environmental and non- environmental
versions.
Polarizing posts that are removable from the
mating face.
Field replaceable inserts for size 22 and
power contacts.
Up to 800 size 22 contacts in one connector.
Crimp, coax, power, printed circuit and wire
wrappable post style contacts.
Uses standard DPX crimp, insertion/extraction
tooling.
Waveguide connections available.
BKAD/E
Rear Release/Rear Removable
Size 12, 16, 20, 22 Crimp Contacts
BKAF
Front Release/Front Removable
Size 22 Solder Tail and Wrap Post Contacts
BKAD/E connectors represent the standard
for new avionic systems developed to support
the air transportation market. Several important
design concerns have been addressed and
solved in this new series. High mating
forces of pluggable modules in a rack have been
reduced by approximately two-thirds.
The low insertion force contacts are also inter-
changeable with the contacts used in the DPX
series and permit retrofit of existing equipment.
This new connector is totally intermateable and
intermountable with ARINC 600 connectors now in
the field.
The BKAF permits the user to easily replace a
contact in case of problems, rather than disas-
semble the entire connector--it is available with
size 22 contacts in wrap post or solder-tail ver-
sions. The system maintains the advantages of low
insertion force technology incorporated in all ARINC
600 connectors.
Pos-Aline Connector Construction Feature
In the ARINC 600 connector series, Size 22 con-
tacts are the only size that utilize this design
feature. The hooded socket extends from its in-
sulator while the pin contacts are shrouded by its
front insulator.
All other contacts used in this series employ stan-
dard contact design.
The result is that the complement of contacts for
the plug connectors will consist of pin contacts for
size 22 and socket contacts for all others. The
receptacle contacts will be just the reverse, socket
contact for size 22 and pin contacts for the
balance.
Material Specifications
BKAD
Material
Shell & Waveguide
Finish
Insulator
Material
Material
Contacts
Finish
Termination
Grommets/Seals
O-Ring
Material
Material
Aluminum alloy
Alodine
1200
Thermoset
Copper alloy
Gold over Nickel
Crimp
N/A
N/A
BKAE
Aluminum alloy
Alodine
1200
Thermoset
Copper alloy
Gold over Nickel
Crimp
Silicone-based Elastomer
Silicone-based Elastomer
BKAF
Aluminum alloy
Alodine
1200
Thermoset
Copper alloy
Gold over Nickel
P.C./Wrap Post
N/A
N/A
Specifications
QQ A-591/A380
MIL-C-5541
N/A
QQ-C-533
MIL-G-45204
N/A
N/A
N/A
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
4
ARINC 600
How to Order
BKA
CONNECTOR SERIES
RoHS
CLASS
SHELL SIZE
CONNECTOR LAYOUT DESCRIPTION
SIZE 1 COAX INSERT MODIFIER
R
D
2
A234
M
3
00
01 *
BKAD/E/F
F0
SHELL STYLE
CONNECTOR MOUNTING MODIFIER
POLARIZING POSITION
MODIFIER (Contact, Finish, Material)
* = For Polarizing Position greater then 99, add third digit.
CONNECTOR SERIES
SHELL STYLE
BKA (Per ARINC 600)
RoHS version
3 -
Plug (rack side)
4 -
Receptacle (box side)
CONNECTOR MOUNTING MODIFIER
R
CLASS
-
RoHS compatible
-
Non-environmental (rear release, crimp
contacts)
-
Environmental (rear release, crimp contacts)
D
E
F
00 -
01 -
Standard design, .148 dia. holes
With #6-32 ESNA (#12 NCFMA2-62) clinch
nuts (see chart)
Connector
Size
1
2
3
Number of Clinch Nuts
Plug
4
4
8
Receptacle
4
6
10
-
Non-environmental (front release, solder
and wrap post
#22
contact, rear release
all others)
C
T
-
Same as E, except uses
BKAD shells and
Less
0
rings on plug side.
-
Non-environmental connector using filtered
contacts
02 -
03 -
08 -
SHELL SIZE
1
2
3
-
Max. contact capacity -
125
-
Max. contact capacity -
400
-
Max. contact capacity -
800
CONNECTOR LAYOUT DESCRIPTION
09 -
(See page 8)
SIZE 1 COAX INSERT MODIFIER
22 -
M
-
Connector contains modified 71W1 or
2W2
insert (four
MTG
screw hole
locations and coaxial contact used in this
insert are interchangeable between
different manufacturers
Size 1 receptacle only - less 3 printed circuit
board mounting lugs
With #4-40 ESNA (#22 NCFMA2-40) clinch
nuts (see chart)
Size 2 and 3 plug and receptacle only - with
#4-40 ESNA (#22 NCFMA2-40) clinch nuts
(all mounting holes)
Size 2 and 3 plug and receptacle only - with
#6-32 ESNA (#12 NCFMA2-62) clinch nuts
(all mounting holes)
Same as - 00 mounting modification except
with nickel finished shells .0008 - .0012 thick
with EMI grounding spring for plug shells and
supplied with non-environmental inserts.
With floating eyelets (.048 min. radial float)
4 corner holes per connector.
23 -
NOTE: A dash must be inserted whenever code does not apply.
Consult Customer Service if other modifications are required
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
5
ARINC 600
How to Order (continued)
CONNECTOR LAYOUT DESCRIPTION
Note: All layouts with "OPEN' insert cavity are not supplied with an insulator. If a Blank insert is required please consult factory.
Three Digit Number Contained within the Shell Layout Indicates Total Number of Contacts Available (including Waveguide)
Connector
Layout
-005
-060
A060
-065
A065
-120
-125
-013
-017
-071
A071
-085
A085
86M
-093
-100
-137
-T141
-142
-155
155M
V155M
158M
-A158M
-163
A163
-164
A164
165M
-A165M
-167
173M
Shell
Size
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Shell Cavity Identification
A
OPEN
OPEN
60
OPEN
60
60
60
OPEN
2W2
OPEN
71W1
Waveguide
71W1
2W2
4W4
OPEN
121
120T2
71W1
71W1
71W1A
71W1B
2W2
2W2
OPEN
150
150
Waveguide
150
2W2
4W4
2W2
B
OPEN
60
OPEN
60
Open
60
60
OPEN
2W2
71W1
OPEN
71W1
Waveguide
71W1A
4W4
OPEN
10T10
10T10
71W1
71W1
71W1A
71W1A
71W1A
71W1B
150
OPEN
Waveguide
150
2W2
150
150
71W1B
C
5W2
OPEN
OPEN
5W2
5W2
OPEN
5W2
13W2
13W2
OPEN
OPEN
13W2
13W2
13W2
85
100
6T6
13W2
OPEN
13W2
13W2
13W2
85
85
13W2
13W2
13W2
13W2
13W2
13W2
13W2
100
708
D
E
F
Ref. ARINC
Characteristic
Connector
Layout
-T173
234
A234
-246
-248
250
250A
-251
-300
-306
-313
-370
-400
-021
-026
-113
-A113
-114
-284
-310
-330M
-A330M
-496
-600
-626
-713
A713
-734
-764
-800
-269M
271C
271M
-326
Shell
Size
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
BKAD/E/F
Shell Cavity Identification
A
150
150
71W1
120T2
121
OPEN
150
Waveguide
150
150
150
150
150
4W4
OPEN
OPEN
OPEN
4W4
71W1
71W1
2W1
150
121
150
150
150
150
150
150
150
2W2
4W4
2W2
OPEN
B
10T10
71W1
150
120T2
121
150
BLANK
150
150
150
150
120T2
150
4W4
OPEN
OPEN
OPEN
4W4
71W1
71W1
2W2
150
121
150
150
150
150
150
150
150
2W2
4W4
2W2
150
C
13W2
13W2
13W2
6T6
6T6
100
100
100
OPEN
6T6
13W2
100
100
13W2
13W2
100
13W2
13W2
OPEN
13W2
13W2
13W2
6T6
OPEN
13W2
100
13W2
100
64
100
13W2
13W2
13W2
13W2
BLANK
OPEN
OPEN
OPEN
4W4
71W1
71W1
150
2W2
121
150
150
150
150
150
150
150
2W2
BLANK
4W4
OPEN
OPEN
OPEN
OPEN
OPEN
4W4
71W1
71W1
150
2W2
121
150
150
150
150
150
150
150
150
150
150
150
OPEN
13W2
13W2
100
85
OPEN
13W2
13W2
13W2
6T6
OPEN
13W2
13W2
100
3W
100
100
100
100
100
13W2
D
E
F
Ref. ARINC
Characteristic
709
727
732
NOTE. ANY OTHER COMBINATION OF INSERTS WITHIN A SPECIFIC SHELL IS AVAILABLE UPON REQUEST
Layout included in the following
ARINC
configurations
702, 710, 711, 712, 714, 715, 716, 723.
Layout included in the following
ARINC
configurations
707, 718 & 730.
Layout included in the following
ARINC
configurations
701, 702, 703, 704, 705, 706, 724, 725.
Layout included in the following
ARINC
configurations
701, 717, 726, 729.
POLARIZING POSITION
01 thru 216 (per ARINC 600)
Blank-Polarizing posts or keys not installed but
supplied with connector
MODIFIER (Contact, Finish, Material)
Blank - Rear release, crimp, signal and power
contacts supplied with connector
(when applicable)
FO -
Contacts not supplied with connector
(FO not stamped on connector)
FOO - Less contacts and waveguide (FOO not
stamped on connector)
SA -
Front release .025(0.63) D. x .150
(3.81) solder post and crimp, rear re-
lease power contacts (when applica-
ble) supplied with connector
SB -
Front release .025(0.63) D. x .250
(6.35) solder post and crimp, rear re-
lease power contacts (when applica-
ble) supplied with connector
SC -
Front release .025(0.63) D. x .375
(9.53) solder post and crimp, rear re-
lease power contacts (when applica-
ble) supplied with connector
Front release .025(0.63) D. x .500
(12.7) solder post and crimp, rear re-
lease power contacts (when applica-
ble) supplied with connector
Front release .025(0.63) Sq. x .250
(6.35) (1 wrap) wrap post and crimp,
rear release power contacts (when ap-
plicable) supplied with connector
Front release .025(0.63 Sq. x .375
(9.53) (2 wraps) wrap post and crimp,
rear relase power contacts (when ap-
plicable) supplied with connector
WC -
Front release .025(0.63) Sq. x 500
(12.7) (3 wraps) wrap post and crimp,
rear release power contacts (when ap-
plicable) supplied with connector
Front release .025 (0.64) Sq. x 641
(16.28) (3 wraps) wrap post and
crimp, rear release power contacts
(when applicable) supplied with con-
nector
SD -
WD -
WA -
NOTE: COAXIAL CONTACTS TO BE ORDERED SEPARATELY
WB -
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
6
ARINC 600
Shell Dimensions - Size 1
Plug
BKAD/E/F
.205 (5.21)
*
.195 (4.95)
BKAE SERIES
1.402 (35.61)MAX
.130 (3.30)
.120 (3.05)
.385 (9.78) MAX
BKAD SERIES
1.102 (27.99) MAX
1.195 (30.35)MAX
1.110 (28.19)
1.090 (27.69)
.655 (16.64)
.645 (16.38)
.148 + .003 (3.76 + 0.08)DIA
_
_
4 PLCS MTG HOLES
1.150(29.21)MIN
.653 (16.59)
.647 (16.43)
.5.465 (138.81)
5.455 (138.56)
.125 (3.18)
*
.105 (2.67)
A
.180 (4.57)
.166 (4.22) D
4 PL
A
6.995 MAX
(177.67)
B
B
6.500 MAX
(165.10)
2.059 (52.30)
2.049 (52.04)
1.313 (33.35)
1.303 (33.10)
C
.620MIN
(15.75)
.479 (12.17)
.469 (11.91)
C
6.355 (161.42)
6.345 (161.16)
6.890
(175.01)
MIN
3.825 (97.16)
3.815 (96.90)
.135 (3.43)
*
.115 (2.92)
6.645 (168.78)
6.629 (168.38)
.030 R MAX
(.76)
4 PL
.120 R MAX
(3.05)
4 PL
6.353
(161.37)
6.347
(161.21)
.6.515 MIN
(165.48)
.030 (.76)R
MAX 4 PL
.250
(6.35)
MAX
.608 MAX
(15.44)
.830 (21.08)
.820 (20.83)
.135 (3.43)
.125 (3.18)
.575 (14.60)
.565 (14.35)
.705 (17.91)
.695 (17.65)
BKAD SERIES
1.198 (30.43) MAX
BKAE SERIES
1.550 (39.37) MAX
.188 (4.78)
.184 (4.67)
3.85 (9.78)
3.75 (9.52)
.191 (4.85)
189 (4.80)
3 PL
Retainer Plate
Size 1 Plug
Panel Cutout
* This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.
For further information, refer to ARINC 600 specification or consult factory.
Receptacle
BKAE SERIES
1.531 (38.89) MAX
.205 (5.21)
*
.195 (4.95)
BKAD/BKAF SERIES
1.221 (31.01) MAX
.130 (3.30)
.120 (3.05)
.125 (3.18)
*
.105 (2.67)
1.010 (25.65)
.990 (25.15)
.655 (16.64)
.645 (16.38)
.148 + .003 (3.76 + 0.08)DIA
_
_
4 PLCS MTG HOLES
.240 (6.10)MAX
.191 (4.85) 2 PL
.189 (4.80)
.030 R
(.76)
MAX
2 PL
5.465 (138.81)
5.455 (138.56)
A
A
.135 (3.43)
*
.115 (2.92)
3.825 (97.16)
3.815 (96.90)
B
7.455 MAX
(189.36)
6.355 (161.42)
6.345 (161.16)
6.870
(174.50)
MIN
6.353
(161.37)
6.347
(161.21)
.287 R (7.29)
MAX 4 PL
6.627 (168.33)
6.607 (167.82)
B
2.059 (52.30)
2.049 (52.04)
1.313 (33.35)
1.303 (33.10)
C
.240
(6.10)
MAX
C
.120 R (3.05)
MAX 4 PL
.810 (20.57)
.800 (20.32)
.135 (3.43)
.125 (3.18)
.575 (14.60)
.565 (14.35)
.705 (17.91)
.695 (17.65)
.180 (4.57)
.166 (4.22) D
4 PL
3.65 (9.27)
3.55 (9.02)
.930 (23.62) MIN
.653
(16.59)
.647
(16.43)
BKAD/BKAF SERIES
1.317 (33.45) MAX
BKAE SERIES
1.670 (42.42)
.188 (4.78)
.184 (4.67)
Retainer Plate
Size 1 Receptacle
Panel Cutout
*This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.
For further information, refer to ARINC 600 specification or consult factory.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
7
ARINC 600
Shell Dimensions- Size 2
Plug
1.810 (45.97)
1.790 (45.47)
1.431 (36.35)
1.421 (36.09)
.655 (16.64)
.645 (16.38)
.148 + 003 (3.76 + 0.08) DIA
_
_
10 PLCS MTG HOLES
BKAD/E/F
BKAE SERIES
1.402 (35.61) MAX
.130 (3.30)
.120 (3.05)
1.195 MAX
(30.35)
BKAD SERIES
1.102 (27.99) MAX
260 (6 60)*
250 (6 35)
.070 (1.78)*
.050 (1.27)
191 (4.85)
189 (4.80)
3PL
653 (16.59)
647 (16.43)
030 (.76) R
MAX 4 PL
A
5.355 (136.02)
5.345 (135.76)
A
030 R
(.76)
MAX
4 PL
6.353
(161.37)
6.347
161.21
120 R
(3.05)
MAX
4 PL
C
.620 MIN
(15.75)
2.135 (54.23)
2.125 (53.98)
C
.180
(4.57)
166 D
(4.22)
8 PL
6.515 MIN
(165.48)
6.890
(175.01)
MIN
135 (3.43)*
115 (2.92)
3 770 (95.76)
3 760 (95.50)
B
B
6 995 MAX
(177.67)
6.500 MAX
(165.10)
6.360 (161.54)
6.340 (161.04)
6.645 (168.78)
6.629 (168.38)
2 004 (50.90)
1 994 (50.65)
1 258 (31.95)
1 248 (31.70)
.608 MAX
(15.44)
.865 (21.97)
.855 (21.72)
168 (4.27)
158 (4.01)
1 415 (35.94)
1 405 (35.69)
BKAD SERIES
1.198 (30.43) MAX
BKAE SERIES
11550 (39.37) MAX
188(4.78)
184(4.67)
385
(9.78)
375
(9.52)
1.429
(36.30)
1.423
(36.14)
1.850 MIN
(46.99)
250 MAX
(6.35)
Retainer Plate
Size 2 Plug
Panel Cutout
* This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.
For further information, refer to ARINC 600 specification or consult factory.
Receptacle
BKAE SERIES
1.531 (38.89) MAX
BKAD/BKAF SERIES
1.221 (31.01)MAX
130 (3.30
.120 (3.05)
260 (6.60)*
250 (6.35)
.070 (1.78)*
.050 (1.27)
1.810 (45.97)
1.790 (45.47)
1.431 (36.35)
1.421 (36.09)
.655 (16.64)
.645 (16.38)
.148 .003 (3.76 + 0.08) DIA.
_
10 PLCS MTG HOLES
191 (4.85)
189 (4.80)
2 PL
1.530
(38.86)
MIN
240
(6.10)
MAX
A
A
6.353
(161.37)
6.347
(161.21)
1.429
(36.30)
1.423
(36.14)
3 PL
5.335 (136.02)
5.345 (135.76)
030 R
(76)
MAX
2 PL
.180
(4.57)
.166 D
(4.22)
10 PL
.260
(6.60)
.230
(5.84)
2 PL
.120 R
(3.05)
MAX
4 PL
.135 (3.43)*
.115 (2.92)
3.770 (95.76)
3.760 (95.50)
6.975 MAX
(177.16)
B
B
6.360 (161.54
6.340 (161.04
6.870
(174.50)
MIN
6.627 (168.33)
6.607 (167.82)
2.004 (50.90)
1.994 (50.65)
1.258 (31.95)
1.248 (31.70)
C
C
2.135 (54.23)
2.125 (53.98)
2.780
(70.61)
MAX
2.133
(54.18)
2.127
(54.03)
2.200
(55.88)
MIN
.865 (21.97)
.855 (21.72)
.168 (4.27)
.158 (4.01)
1.415 (35.94)
1.405 (35.69)
BKAD/BKAF SERIES
1.317 (33.45)
BKAE SERIES
1.670 (42.42)
.188 (4.78)
.184 (4.67)
.365 (9.27)
.355 (9.02)
.240 MAX
(6.10)
.287 R
(7.29)
MAX
8 PL
.653 (16.59)
.647 (16.43)
2 PLC
Retainer Plate
Size 2 Receptacle
Panel Cutout
*This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.
For further information, refer to ARINC 600 specification or consult factory.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
8
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
