TS971, TS972, TS974
Output rail-to-rail very low noise operational amplifier
Datasheet - production data
Features
Rail-to-rail output voltage swing ±2.4 V at
V
CC
= ±2.5 V
Very low noise level: 4 nV/√Hz
Ultra low distortion: 0.003 %
High dynamic features: 12 MHz, 4 V/µs
Operating range: 2.7 to 10 V
ESD protection (2 kV)
Latch-up immunity (class A)
Applications
Portable devices (CD players, PDAs)
Portable communication
(cell phones, pagers)
Instrumentation and sensing technology
Professional audio circuits
Description
The TS97x family of operational amplifiers
operate with voltages as low as ±1.35 V and
feature output rail-to-rail signal swing. The TS97x
devices are particularly well suited for portable
and battery-supplied equipment. Very low noise
and low distortion characteristics make them
ideal for audio pre-amplification.
The TS97x devices are available in a variety of
packages to suit all types of applications. For
applications where space saving is critical, the
SOT23-5 package (2.8 x 2.9 mm) or the DFN8
package (3 x 3 mm) simplify the board design
because they can be placed anywhere on it.
June 2016
DocID6031 Rev 11
1/18
www.st.com
This is information on a product in full production.
Contents
TS971, TS972, TS974
Contents
1
2
3
4
5
Package pin connections................................................................ 3
Absolute maximum ratings and operating conditions ................. 4
Electrical characteristics ................................................................ 6
Electrical characteristic curves ...................................................... 7
Package information ....................................................................... 9
5.1
5.2
5.3
5.4
5.5
5.6
SOT23-5 package information ........................................................ 10
SO8 package information ................................................................ 11
TSSOP8 package information ......................................................... 12
DFN8 3x3 exposed pad package information ................................. 13
SO14 package information .............................................................. 14
TSSOP14 package information ....................................................... 15
6
7
Ordering information..................................................................... 16
Revision history ............................................................................ 17
2/18
DocID6031 Rev 11
TS971, TS972, TS974
Package pin
connections
1
Package pin connections
Figure 1: Package pin connections
1.
The exposed pad of the DFN8 3x3 can be connected to VCC or left floating
DocID6031 Rev 11
3/18
Absolute maximum
ratings and operating
conditions
TS971, TS972, TS974
2
Absolute maximum ratings and operating conditions
Table 1: Absolute maximum ratings (AMR)
Symbol
V
CC
V
id
V
in
T
stg
T
j
Supply voltage
(1)
Differential input voltage
(2)
Input voltage
(3)
Storage temperature range
Maximum junction temperature
SOT23-5
SO8
R
thja
Thermal resistance junction-to-ambient
(4)
TSSOP8
DFN8 3x3
SO14
TSSOP14
SOT23-5
SO8
R
thjc
Thermal resistance junction-to-case
(4)
TSSOP8
DFN8 3x3
SO14
TSSOP14
HBM: human body model
ESD
MM: machine model
(6)
CDM: charged device model
(7) (8)
(5)
Parameter
Value
12
±1
V
DD
- 0.3 to V
CC
+ 0.3
-65 to 150
150
250
125
120
40
105
100
Unit
V
°C
°C/W
81
40
37
5.2
31
32
2
200
1.5
260
kV
V
kV
°C
Lead temperature (soldering, 10 sec.)
Notes:
(1)
All
voltage values, except the differential voltage are with respect to the network ground terminal.
differential voltage is the non-inverting input terminal with respect to the inverting input terminal.
magnitude of input and output voltages must never exceed V
CC
+ 0.3 V.
(2)
The
(3)
The
(4)
Short-circuits can cause excessive heating and destructive dissipation. Values are typical.
(5)
Human
body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5kΩ
resistor between two pins of the device. This is done for all couples of connected pin combinations while the other
pins are floating.
(6)
Machine
model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two
pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected
pin combinations while the other pins are floating.
(7)
(8)
No value specified for CDM on SOT23-5 package.
Charged device model: all pins and package are charged together to the specified voltage and then discharged
directly to ground through only one pin. This is done for all pins.
4/18
DocID6031 Rev 11
TS971, TS972, TS974
Absolute maximum
ratings and operating
conditions
Table 2: Operating conditions
Symbol
V
CC
V
icm
T
oper
Supply voltage
Parameter
Value
2.7 to 10
V
DD
+ 1.15 to V
CC
- 1.15
-40 to 125
Unit
V
°C
Common mode input voltage range
Operating free air temperature range
DocID6031 Rev 11
5/18
stm32/stm8
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
