NETWORK SEARCH ENGINE
64K x 72 Entries
Datasheet
Brief
75P52100
To request the full IDT75P52100 datasheet, please contact your local
IDT Sales Representative or call 1-800-345-7015
Device Description
IDT provides proven, industry-leading network search engines
(NSEs) and a comprehensive suite of software that enable and accelerate
the intelligent processing of network services in communications equip-
ment. As a part of the complete IDT classification subsystem that includes
content inspection engines, the IDT family of NSEs delivers high-
performance, feature-rich, easy-to-use, integrated search accelerators.
The IDT 75P52100 NSE is a high performance pipelined low-power,
synchronous full-ternary 64K x 72 entry device. Each entry location in
the NSE has both a Data entry and an associated Mask entry. The NSE
devices integrate content addressable memory (CAM) technology with
high-performance logic. The device can perform Lookup and Learn NSE
operations plus Read, Write, Burst Write, and Dual Write maintenance
operations.
The IDT 75P52100 NSE device has a bi-directional bus that is a
multiplexed address and data bus that can support 100 million sustained
searches per second. This device provides array segments which can
be configured to enable multiple width lookups from 36 to 576 bits wide.
The IDT 75P52100 requires a 1.8-volt V
DD
supply, a user selectable 1.8
or 2.5-volt V
DDQ
supply, and a 2.5-volt V
BIAS
supply. This NSE device
provides the user with flexibility and control in determining the device
power. Only the array segments that will be used for a specific NSE
operation are powered up while the unused segments are not.
The IDT 75P52100 utilizes IDT’s latest high-performance 1.8V
CMOS processing technology and is packaged in a JEDEC Standard,
thermally enhanced, low profile Ball Grid Array. The options include a
304 BGA, satisfying smaller footprint requirements and a 372 BGA
package that is compatible with IDT's 32K x 72 Entry (75P42100) and
128K x 72 Entry (75P62100) NSE devices.
Block Diagram
LAST NSE
LAST SRAM
Configuration Registers
and
Ram Control Circuits
SRAM CONTROL
ASIC FEEDBACK
CLOCK
PHASE
÷2
CCLK
BURST
Counter
RESET
S
I
Z
E
ARRAY
R/W
Instruction
REQSTB
Command
Bus
NSE
REQUEST
BUS
D
E
L
O
G
I
C
P
R
I
O
R
I
T
Y
E
N
C
O
D
E
R
Index
Bus
NSE
RESPONSE
BUS
Request
Data
Bus
C
Address
O
D
E
Bypass
Comparand Registers
MMOUT
Global Mask Registers
DATA
Result Register
MATCHOUT
5333 drw 01
System Configurations
The IDT NSEs are designed to fulfill the needs of various types of
networking systems. In solutions requiring data searching such as
routers, a system configuration as shown in Figure 1.0 may be realized.
Maximum flexibility is provided by allowing one board design to be
populated today using either the IDT 75P42100 or 75P52100 NSEs and
later upgraded to use IDT’s 75K62100 NSE. Applications note AN-279
discusses how to accommodate one board design for any of these NSEs.
In this compatible configuration, the NSE interfaces directly to an
ASIC/ FPGA for lookups and routes an Index to an associated SRAM
device, which supplies the next hop address via an SRAM Data Bus to
the ASIC. The NSE provides the required control signals to directly
hookup to ZBT™ or Synchronous Pipeline Burst SRAM. Lookup results
can also be fed directly back to the ASIC/ FPGA without the use of external
SRAM. Control of the associated handshake signals is provided by all
NSEs to adapt to either configuration.
1
2003 Integrated Device Technology, Inc.
All rights reserved.
Product specifications subject to change without notice.
DSC-5333/03
Figure 1.0 ASIC / Compatible NSE / SRAM configuration
IDT
75P42100
or
75P52100
or
75K62100
Network Search Engine
5333 drw02
Optional
ZBT
or
Sync SRAM
Network Interface
ASIC
or
FPGA
JUNE 2003
Network Search Engine 64K x 72 Entries
Datasheet Brief 75P52100
■
SRAM No Wait Read
Features
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Full Ternary 64K x 72 bit content addressable memory
Upgradeable to 128K x 72 NSE
Power Management
Global Mask Registers
Segments individually configurable
36/72/144/288/576 multiple width lookups
100M sustained lookups per second at 72 and 144 width lookups
Burst write for high speed table updates
Multi-match
Learn new entries
Dual bus interface
Cascadable to 8 devices with no glue logic or latency penalty
Glueless interface to standard ZBT™ or
Synchronous Pipelined Burst SRAMs
Boundary Scan JTAG Interface (IEEE 1149.1compliant)
1.8V core power supply
2.5V V
BIAS
power supply
User selectable 2.5V or 1.8V I/O supply
An SRAM No Wait Read is a Read instruction to an external SRAM that
can be pipelined within a series of operations and does not require the user
to wait for the Read to complete before loading the next instruction.
■
Dual Write
In addition to individual writes, the NSE has the ability to perform
simultaneous writes to a Data entry and a respective external SRAM
location.
■
Lookup
A lookup can be requested in 72-bit, 144-bit, 288-bit or 576-bit widths.
A 36-bit lookup can be accomplished by using two Global Mask Registers.
■
Learn
The NSE implements a fully autonomous Learn Instruction, which
provides a mechanism for the user to write a lookup entry into an unused
location in the NSE and the associated data in external SRAM. This allows
the user to update an entry into the NSE which had not previously been
stored. The Learn writes the new entry, making it available for future
lookups.
SRAM Interface
The NSE provides all required address and control signals for a
glueless SRAM interface. The NSE provides a pipelined bypass path for
reads or writes to the external SRAM. The ASIC/FPGA handles the
pipelining of the data to and from the SRAM.
Registers
There are four basic types of registers supported:
■
Configuration Registers are used at initialization to define the
segmentation of the entries, timing of outputs and the SRAM interface.
■
Global Mask Registers are provided to support Lookup
instructions by masking individual bits during a search.
■
Comparand Registers assist in the Learn Instruction.
■
Result Registers are used to store the resulting index of a search
from a Lookup or Learn operation.
Synchronous Burst Write
The burst write feature has no limit on the number of continuous write
accesses and supports initialization of the NSE.
Width Segmentation Capability
The NSEs are capable of performing lookups for comparisons on data
structures of 72 bits, 144 bits, 288 bits and 576 bits. These devices has
can be configured to meet various system requirements.
■
Single Width Array
■
Multiple Width Arrays within a Single Device
Multi Match
The Multi-Match feature signals to the user that more than one match
has resulted. The result of the lookup, which defines the highest priority
match, is sent along with the Multi-Match signal.
Power Savings and Classification Features
See the full IDT75P52100 Datasheet for more information.
Functional Highlights
Data and Mask Array
The NSE has Data cell entries and associ-
ated Mask cell entries as shown in Fig. 1.1. This
combination of Data and Mask cell entries en-
ables the NSE to store 0, 1 or X, making it a full
ternary Network Search Engine. During a
lookup operation, both arrays are used along
with a Global Mask Register to find a match to a
requested data word.
Figure 1.1
Mask
Da t a
A5333 drw 03
Bus Interface
The NSE utilizes a dual bus interface consisting of the NSE Request
Bus and the NSE Response Bus.
The NSE Request Bus is comprised of the Command Bus and the
Request Data Bus. The Command Bus handles the instruction to the NSE
while the Request Data Bus is the main data path to the NSE.
The 72 bit bi-directional Request Data Bus functions as a multiplexed
address and data bus, which performs the writing and reading of NSE
entries, as well as presenting lookup data to the device.
The NSE Response Bus is comprised of an independent unidirec-
tional Index Bus which drives the result of the lookup (or index) to either
an SRAM device or an ASIC. In addition to driving the Index, the NSE
Response Bus also drives the associated SRAM control signals (CE/OE,
and
WE)
for either ZBT™ or Synchronous Pipeline Burst SRAM devices.
Command Bus
The Command Bus loads the specific instructions into the NSE. These
include:
■
Read or Write
A Read or Write instruction operates on a specified data entry, mask
entry, or register.
2
Network Search Engine 64K x 72 Entries
Datasheet Brief 75P52100
Signal Descriptions
Pin Function
NSE Request Bus:
Request Strobe
Instruction
Lookup Type
Command
Bus
Global Mask
Register Select
Comparand and
Result Register
Select
Request Data Bus
NSE Response Bus:
Address
Index Bus
Device ID
Lookup Type
Chip Enable/ Output Enable
Write Enable
Read Acknowledge
Match Acknowledge
Valid
Lookup Bit
Multi Match
Output
Depth Expansion:
Device Address
Match
Input
Match
Output
Clock and Initialization:
Clock Input
Clock Phase Enable
Reset
Advance Burst Address
Last NSE
Last SRAM
Input
Input
Input
Input
Input
Input
All inputs and outputs are referenced to the positive edge of this clock.
This signal is used to generate an internal clock at ½ the freque ncy of the input clock.
This pin will force all outputs to a high impedence condition, as well as clearing the NSE enable bit.
This signal will advance an internal address counter to allow for burst writes when writing to the Data/Mask
memory in the NSE. This provides a mechanism to conveniently initialize the NSE memory.
This pin defines which NSE device will drive the ASIC Feedback signals to the ASIC/FPGA.
This pin defines which NSE device will drive the SRAM control signals
CE/OE
and
WE.
It also defaults
this device to driving the Index Bus when there is no ongoing operation preventing the bus from floating.
Input
Input
Output
These three DC pins are used to define the Device Address for each of the eight possible depth
expanded NSE devices in an NSE system.
The Match Input signal is driven by all upstream Match Output signals. This indicates to all down stream
NSEs that a hit in a higher priority NSE has occurred.
The Match Output signal signifies that a match has occurred in the NSE. The signal is fed into a Match
Input line of all lower priority NSE(s).
This bus is used to drive the address of an external SRAM, or feedback Lookup result information
Output
directly to the NSE's ASIC/FPGA. The Index Bus contain the encoded location at which the compare was
Three State
found, the address of the NSE which found the result and the Lookup type.
Output
Three State
This signal is driven along with the Index Bus. It is connected to the
CE
input pin of a ZBT SRAM or to the
OE
pin of a PBSRAM.
Input
Input
Input
Input
This input signifies a valid input request and signals the start of an NSE operation cycle.
These two fields of the Command bus define the instruction to be performed by the NSE and the lookup
type. The lookup type is selected only for operational type commands (Lookups, Learns) and is a "don't
care" for maintenance typ e commands (all Reads and Writes).
This field is within the Command bus. During Lookup or Write operations, this field defines which of the
Global Mask Register groups are b eing accessed. This field is a "don't care" for Read, SRAM No Wait
Read, and Learn Operations.
This is a multiplexed field within the Command Bus that specifies both the Result Register to store the
Index into, and the Comparand Reg ister to use. This field is sampled every input clock cycle. The first
cycle decodes the selected Comparand Register and the second decodes the selected Result Register.
I/O
Description
Input
Input/Output The Request Data Bus is a multiplexed address/data bus used to perform reads (and writes) from (to) the
Three State NSE, and to present search data for lookups.
This signal is driven along with the Index bus. It is used to assert the
WE
pin of an external SRAM. It is
Output
Three State active for both SRAM write operations and the Learn command.
Output
Output
Output
This signal is sent back when the data is read from the NSE on the Request Data Bus, or when the data
being read from the associated external SRAM.
This is signal is sent with the Index. It will be driven low if there was no match, high if a match was found.
This signal is sent with the Index. It will be driven high upon the completion of a lookup, even if the
lookup did not result in a hit.
This signal is sent with the Index. It shall go active when a) multiple hits occur in one segment; or, b) one
Output
or mo re hits occur in two (or more) segments; or, c) one or more hits occur in multiple devices that are
(Open Drain)
depth cascaded.
6.42
3
5333 tbl 01
51单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
