F-203-1
.100"
(2,54mm)
IDC CABLE
SPECIFICATIONS
Mates with:
TSW, MTSW, TSM, EJH
IDMS, IDMD, IDSS
& IDSD SERIES
END
ASSEMBLY
Single
IDSS, IDSD
TYPE
STRIP
ROW
OPTION
NO. PINS
PER ROW
For complete specifications
see www.samtec.com?IDSS
or www.samtec.com?IDSD
Insulator Material:
Black Glass Filled
Polyester
Temperature Range:
-20°C to +105°C
(Rainbow Cable)
-40°C to +105°C
(Gray Cable)
Contact:
BeCu
Plating:
Au over 50µ" (1,27µm) Ni or
Sn over 100µ" (2,54µm) Cu or
50µ" (1,27µm) Ni
Current Rating:
1A
Contact Resistance:
10 mΩ max
Lead Size Range:
(0,56mm) .022" SQ to
(0,71mm) .028" SQ
Lead Insertion Depth:
(5,59mm) .220" to (6,22mm)
.245"
Insertion Force:
4oz avg
((0,64mm) .025" SQ probe)
Withdrawal Force:
3oz avg
((0,64mm) .025" SQ probe)
Wire:
28 AWG 7/36 stranded
Tinned Copper
S
IDM
= Standard Tail Male Plug
= Single
D
= Double
(Color coded
cable
N/A for 31
thru 36 pins/
row. See –G
option.)
S
D
–S
= End
IDS
= Socket
Socket or Male Plug
on one end
–D
= Double
End
–02 thru –32
DOUBLE
Full size (64 positions):
(82,55) 3.250
Less than 64 positions:
No. Positions/row X (2,54) .100 + (1,68) .066
SINGLE
Full size (32 positions):
(81,53) 3.210
Less than 32 positions:
No. Positions/row X (2,54) .100 + (0,71) .028
IDMS
(Single)
(2,54)
.100
IDMD
(Double)
Socket or Male Plug
on each end
(5,08)
.200
(6,10)
.240
MAX
–T
= Transfer
End
(2,54)
.100
SPECIFICATIONS
(0,48)
.019
(0,46)
.018
x
(0,48)
.019
(2,54)
.100
(3,18)
.125
IDMS, IDMD
For complete specifications
see www.samtec.com?IDMS
or www.samtec.com?IDMD
Insulator Material:
Black Glass Filled
Polyester
Temperature Range:
-20°C to +105°C
(Rainbow Cable)
-40°C to +105°C
(Gray Cable)
Terminal:
Phosphor Bronze
Plating:
Au over 50µ" (1,27µm) Ni or
Sn over 100µ" (2,54µm) Cu
or 50µ" (1,27µm) Ni
Current Rating:
1A
Wire:
28 AWG 7/36 stranded
Tinned Copper
(For square or long tail see HCMX Series)
Male Plug on one end with
socket on other.
Begin part
number with IDM.
–02 thru –36
DOUBLE
Full size (72 positions):
(91,71) 3.650
Less than 72 positions:
No. Positions/row X (2,54) .100 + (1,50) .059
SINGLE
Full size (32 positions):
(91,69) 3.610
Less than 36 positions:
No. Positions/row X (2,54) .100 + (0,48) .019
ALSO AVAILABLE
IDSS
(Single)
IDSD
(Double)
(5,08)
.200
Flex Test Links
• Test PCBs that are normally
stacked and mated parallel
• Unmate boards and reconnect
with Test Link to expose
components on boards
• Signals routed outside row to
outside row and inside row to
inside row (pin 1 to pin 2, pin 2
to pin 1, etc.)
• Standard 12" length flex circuit
• Mates with TSW/SSW
connector sets
• For specifications see
www.samtec.com?HTL
(9,27)
.365
REF
(2,54)
.100
Note:
This Series is non-standard,
non-returnable.
(0,76)
.030
SQ
(2,54)
.100
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
SAMTEC USA
• Tel: 1-800-SAMTEC-9 or 812-944-6733 • Fax: 812-948-5047
SAMTEC UK
• Tel: 01236 739292 • Fax: 01236 727113
SAMTEC GERMANY
• Tel: +49 (0) 89 / 89460-0 • Fax: +49 (0) 89 / 89460-299
SAMTEC FRANCE
• Tel: 01 60 95 06 60 • Fax: 01 60 95 06 61
SAMTEC ITALY
• Tel: 39 039 6890337 • Fax: 39 039 6890315
SAMTEC ISRAEL •
Tel: 972 3 648 7207 • Fax: 972 3 648 7214
SAMTEC SCANDINAVIA •
Tel: +46-84477280 • Fax: +46-87420413
SAMTEC ASIA PACIFIC
• Tel: 65 6745-5955 • Fax: 65 6841-1502
SAMTEC JAPAN
• Tel: 81-424-42-8318 • Fax: 81-424-42-8319
SAMTEC CHINA
• Tel: 86-21-5385-4089 • Fax: 86-21-5385-4047
SAMTEC TAIWAN
• Tel: 886-02-2364-6077 • Fax: 886-02-2367-9531
SAMTEC HONG KONG
• Tel: 852-26904858 • Fax: 852-26904842
SAMTEC ANZ •
Tel: 613 9512 7747 • Fax: 613 9512 7745
ASSEMBLED
LENGTH
OPTION
ALSO AVAILABLE
Molded-To-Position
IDC Assembles
– “XX.XX”
= Assembled Length
Assembled Length in
INCHES (±1/8" )
(2 inches minimum)
POLARIZING KEY
(0,64) .025
SQ
(5,84)
.230
Optional polarizing key for
use with IDSS & IDSD
Series. Also polarizes
SSW, SSQ, ESW & ESQ
Series. Black High
Temperature Thermoplastic
Order: Part Number PK-01-06
•
•
•
•
•
Low Profile
Skinny side locks
Dual beam contacts
Single and double row
(6,35mm) .025" square
and (5,84mm) .230" length
tail available
Call Samtec for
HCXX Series.
Tin Plating
–T
= (Both ends)
Tin IDM
= 10
µ
" (0,25
µ
m) Gold IDS
(-T End Assembly Required)
10
µ
" (0,25
µ
m) Gold IDM
–ST “X”
= Stripped & Tinned
Specify Suffix from table.
All dimensions are
±
1/16".
Not available in 28 positions and higher.
–S “XX”
= Daisy Chain Single
“XX” ±
1
⁄
8
"
2"
min.
Single Row
Connectors
(IDSS)
–R
= Reversed
–C
IDS
–A
= TinEnd Assembly Required)
(-T
Outer Most
4" minimum
Standard plating is selective
gold over BeCu contact for IDS;
Selective gold over phosphor
1
bronze for IDM.
–P “XX”
=Polarized
72
04
02
–ST8
–ST4
–ST2
–ST3
1/8" (3,18)
1/4" (6,35)
1/2" (12,70)
3/8" (9,53)
4
When mating double row
connector with two single row
connectors, the outer most
single will be connected to
Conductor #1 and the inside
single to Conductor #2.
8
–M
= Middle Reversed
7
–B “XX”
= Breakout
71
03
01
–D “XX”
= Daisy Chain, Double
“XX” ±
1
⁄
8
"
2"
min.
Double Row
Connectors
(IDSD or
IDMD)
Outer Most
“XX”
Specify “XX” as position. For
Double the same position will
be polarized on both ends. (Not
available on IDM or EDM,
unless Transfer, then only the
socket is polarized)
2
Specify “XX” as number of
conductors to be broken out.
Requires –SXX, –WXX or –DXX
8
–O
= Outside Reversed
7
4" minimum
5"max.
2"min.
–G
= Gray Cable
Specify –G for Gray cable.
Gray cable has one red edge.
IDSS uses .100" centerline
cable. IDSD and IDMD uses
.050" centerline cable. Cable is
28 AWG 7/36 copper wire.
Standard cable is same as
above except color coded.
Breakout starts with Number 1
lead indicated by brown wire or
red stripe. Shown on top side.
–W “XX”
5
= Wiring Reversed
Daisy Chain, Single
–RW
= Reversed Wiring
#1 wire opposite position #1.
3
6
Same as –S “XX” except outer
strip connected to Conductor
#2 and inside strip connected
to Conductor #1.
7
Requires –SXX, –WXX or –DXX
8
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
SAMTEC USA
• Tel: 1-800-SAMTEC-9 or 812-944-6733 • Fax: 812-948-5047
SAMTEC UK
• Tel: 01236 739292 • Fax: 01236 727113
SAMTEC GERMANY
• Tel: +49 (0) 89 / 89460-0 • Fax: +49 (0) 89 / 89460-299
SAMTEC FRANCE
• Tel: 01 60 95 06 60 • Fax: 01 60 95 06 61
SAMTEC ITALY
• Tel: 39 039 6890337 • Fax: 39 039 6890315
SAMTEC ISRAEL •
Tel: 972 3 648 7207 • Fax: 972 3 648 7214
SAMTEC SCANDINAVIA •
Tel: +46-84477280 • Fax: +46-87420413
SAMTEC ASIA PACIFIC
• Tel: 65 6745-5955 • Fax: 65 6841-1502
SAMTEC JAPAN
• Tel: 81-424-42-8318 • Fax: 81-424-42-8319
SAMTEC CHINA
• Tel: 86-21-5385-4089 • Fax: 86-21-5385-4047
SAMTEC TAIWAN
• Tel: 886-02-2364-6077 • Fax: 886-02-2367-9531
SAMTEC HONG KONG
• Tel: 852-26904858 • Fax: 852-26904842
SAMTEC ANZ •
Tel: 613 9512 7747 • Fax: 613 9512 7745
淘e淘
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
