MINT1045
45 W Single Output Series
Medical & ITE – Universal Input Power Supply
•
45 W Convection Cooled
•
Universal Input 80--270 Vac
•
Very Small Size: 2” W x 3” L x 1.0” H
•
88% Efficiency Typical
•
Class I or Class II AC Input Applications
•
CSA/EN/IEC/UL60601-1 3
rd
3 Year Warranty
Edition for Medical,
Type BF Capable, Ultra-low Leakage Current
nd
•
CSA/EN/IEC/UL60950-1 2
Edition for ITE
Specifications
AC Input
Input Current
Inrush Current
Input Fuses
Power Factor
Efficiency
Output Power
All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
100-240Vac +/- 10%, 47-63 Hz 1∅ rated
80-270 Vac, 47-440 Hz operational
0.75A @ 120 Vac, 0.45 A @ 240 Vac
37A max., 264 Vac
F1, F2: 1.6A, 250Vac fuses provided internally
Complies with EN61000-3-2, Class A
88% typical
45 W continuous. See chart for operation above 50°C
50 W for 1 minute, 10% duty cycle
Turn On Time
Hold-up Time
Overload Protection
Short Circuit Protection
Overtemperature Protection
500 ms max at 120 Vac
25 ms minimum at 45 W, nominal input (120Vac)
120-150%, auto-reset
Hiccup Mode, 58W typical
Hiccup Mode, 58W typical
Self-Recovering
Overvoltage Protection
Peak Output Power
Ripple and Noise
1% pk-pk max., 20 MHz BW, differential mode
Measured with noise probe directly across output terminals
Output Voltage
See chart
Voltage Adjustability
Not adjustable
Factory set with fixed resistors for higher reliability
Minimum Load
Not required
Total Regulation
Transient Response
Switching Frequency
See chart
500µs max. to 1%, 50% load step
0.2A/µs, 3.5% deviation. typical
Fixed 65 kHz, typical
Medical Safety Standards
CSA/EN/IEC/UL 60601-1, 3
rd
Edition
Methods Of Protection: 2 MOPP for Type BF Applications
ITE Safety Standards
CSA/EN/IEC/UL 60950-1, IEC 2
nd
Edition
See page 2 for detailed safety agency standards
Isolation
Input-Output: 4500Vac, Input-Ground: 1900Vac
Output-Ground: 1900Vac
Leakage Current
12V-28V models: 120Vac: 30µA NC/70µA SFC
264Vac: 75µA NC/130µA SFC
48V model: 120Vac: 90µA NC/120µA SFC
264Vac: 190µA NC/220µA SFC
Operating Temperature
-20° to 70°C
See derating chart
Output Power Derating
Derate output power by 2.5%
per
°C
above 50°C, up to 70°C max
Storage Temperature
-40 to +85°C
Relative Humidity
5% to 95%, non-condensing
MTBF
300K hours per Telcordia
Model Number Key
MINT 1 045 A 12 75 K 01
01 = Standard Model, 02 and higher indicates a m odified m odel.
"K" = Input Connector - 3 pin header
"75" = Output Connector - 4 pin header
Output Voltage: "12" = 12V output, "24" = 24V output, etc.
Model Configuration: "A" = Class I Input; "B" = Class II Input (no ground)
Output Pow er (Watts) - "045" = 45W
# of Outputs
Product Fam ily: "M" = Medical, "I" = Internal, "NT" = New Technology
______________________________________________________________________________________________________________________________
1 of 3
SL Power Electronics Corp
•
6050 King Drive Ventura, CA 93003
•
Phone 805.486.4565
•
Fax 858.712.2040
•
Email: info@slpower.com
•
www.slpower.com
MINT1045
45 W Single Output Series
Medical & ITE – Universal Input Power Supply
Output Parameters
Model
Number
Volts
Output
Current
Ripple
& Noise
Total
Regulation
Initial Set-point
Tolerance
3 Year Warranty
MINT1045A1275K01
MINT1045A1575K01
MINT1045A2475K01
12 V
15 V
24 V
3.75
3.00
1.90
120mV
150mV
240mV
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±2%
±2%
±2%
±2%
±2%
Consult factory for availability
MINT1045A2875K01
28 V
1.60
280mV
MINT1045A4875K01
48 V
0.95
480mV
Notes:
1. Derate output power by 2% per volt AC for input voltage <90Vac.
Specifications
(continued)
Random vibration per MIL-STD-810E, Method 514.4,
Cat. 1, Figure 514.4-1, 1 hr in each of three axes
Enclosure Dimensions
See outline drawing
Vibration
Weight
Shock
Operating Altitude
Non-operating Altitude
Half-sine, 40 gpk, 10 msec duration, +/- in
each of three axes, total of 6 shocks
-500 to 10,000 ft
-500 to 40,000 ft
113 grams
EMI/EMC Compliance
Conducted Emissions
Radiated Emissions
EN55011/22 Class B, FCC Part 15, Class B, 6db margin
EN55011/22 Class A, FCC Part 15, Class A, 10db margin
To meet class B for grounded input (Class I), unit should be
mounted on a metal plate.
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
EN61000-4-3, 3V/m.
EN61000-4-4, 2kV/5kHz.
EN61000-4-5, 1kV differential, 2kV common-mode
EN61000-4-6, 3Vrms
EN61000-4-8, 3A/m
EN61000-4-11 100Vac, 95% dip/0.5 cycle (Criteria A),
60%/5cycles (Criteria A at 30% load), 30%/25 cycles (Criteria A).
Complies with EN61000-3-2, EN60601-2-1
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
Line Surge Immunity
Conducted RF Immunity
Power Frequency Magnetic Field Immunity
Convection Cooled
Voltage Dip Immunity
Line Frequency Harmonics
Safety Agency Compliance
•
•
•
Medical Certification to the New 3rd Edition:
Demko certified to EN 60601-1:2005, 3rd Ed.
CB certified to IEC 60601-1:2005, 3rd Edition
UL Recognized to ANSI AAMI ES60601-1:2005
& CAN/CSA C22.2, No. 60601-1-08
ITE Certification to the New 2nd Edition:
•
Demko certified to EN60950-1:2006+ A11:2009,2nd Ed.
•
CB certified to IEC 60950-1:2005, 2nd Edition
•
UL Recognized to UL 60950-1:2007, 2nd Edition &
CAN/CSA C22.2, No. 60950-1-07, 2nd Edition
______________________________________________________________________________________________________________________________
2 of 3
SL Power Electronics Corp
•
6050 King Drive Ventura, CA 93003
•
Phone 805.486.4565
•
Fax 858.712.2040
•
Email: info@slpower.com
•
www.slpower.com
MINT1045
45 W Single Output Series
Medical & ITE – Universal Input Power Supply
Outline Drawing
3 Year Warranty
[4]
0.122
4 PLCS
MTG HOLES
Mating Connectors:
J1 = AMP 640250-3, J2 = 640250-4,
Contacts = AMP 770461-1
Note:
For Class II (No earth ground) applications, all mounting
hardware must be non-conductive.
Data Sheet © 2011 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication.
Rev. 6-7-2011
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
______________________________________________________________________________________________________________________________
3 of 3
SL Power Electronics Corp
•
6050 King Drive Ventura, CA 93003
•
Phone 805.486.4565
•
Fax 858.712.2040
•
Email: info@slpower.com
•
www.slpower.com
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
