The FM series includes small, resin-molded electric double-layer capacitors suitable for automatic assembly.
These capacitors are ideal as long-time backup devices for minute-current loads in VCRs, audio systems, cordless
telephones, and compact electronic systems. (FME types are backup devices adaptable to current consumption mA
level.)
Features
• High adaptability to automatic assembly
• Can be cleaned
• Excellent voltage holding characteristics ideal for long-time supply of 1
μ
A to several hundred
μ
A (Except 3.5 V type,
FME type)
• Space saving
Applications
Backup of CMOS microcomputers, static RAMs, and DTSs
Part Number System
• Bulk
FM
0H
473
Z
F
Environmental Impact Reduced Product
Capacitance tolerance
Z: +80%, –20%
Nominal capacitance
First two digits represent significant figures.
Third digit specifies number of zeros to follow
μ
F code.
Maximum operating voltage
0H: 5.5 Vdc
0V: 3.5 Vdc
0 J : 6.5 Vdc
Super Capacitor: FM series
FME type
FMR type
FMC type
• Tape (Ammo Pack)
FM0H223Z
TP
16
Height of component from tape center.
16: 16 mm, 18: 18 mm
Tape packaging
Part number of bulk packaging
Number of Packed Capacitors
Tape: 1000 pcs./box
16 Super Capacitors Vol.07
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2007.08.03 P0862SUCA16VOL07E
Markings
Negative polarity identification
NT
Maximum
rated voltage
Nominal capacitance
5.5 V
473
E
K1
-
+
E:FME type Marking
R:FMR type Marking
Date code
Polarity
Dimensions
10.5
±
0.5
(0.413)
T± 0.5
11.5± 0.5
(0.453)
0.5± 0.1
(0.020)
5± 0.5
(0.197)
0.4
(0.016)
*5± 1
(0.197)
0.4± 0.1
(0.016)
Unit: mm
(inch)
*Bulk Type
Standard Rating
●
5.5 V Type
Part Number
Ammo pack
FM0H103ZF FM0H103ZFTP ( )
Max.
Voltage
Max. ESR Max. Current
Operating Nominal Capacitance
at 30
Holding
(at 1 kHz)
Voltage Charge System Discharge System
minutes
Characteristic
(Ω)
(VDC)
(mA)
Min. (V)
(F)
(F)
5.5
0.01
0.014
300
0.015
4.2
T
mm
(inch)
5.0
(0.197)
5.0
(0.197)
5.0
(0.197)
6.5
(0.256)
6.5
(0.256)
Note:
To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.)
Super Capacitors Vol.07 17
Weight
g
(oz)
1.3
(0.046)
1.3
(0.046)
1.3
(0.046)
1.6
(0.056)
1.6
(0.056)
FM0H223ZF FM0H223ZFTP ( )
5.5
0.022
0.028
200
0.033
4.2
FM0H473ZF FM0H473ZFTP ( )
5.5
0.047
0.06
200
0.071
4.2
FM0H104ZF FM0H104ZFTP ( )
5.5
0.10
0.13
100
0.15
4.2
FM0H224ZF FM0H224ZFTP ( )
5.5
–
0.22
100
0.33
4.2
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2007.08.03 P0862SUCA16VOL07E
●
3.5 V Type
Part Number
Ammo pack
FM0V473ZF
FM0V473ZFTP ( )
Max.
Nominal Capacitance
Operating
Voltage Charge System Discharge System
(VDC)
(F)
(F)
3.5
0.047
0.06
Max. ESR
(at 1 kHz)
(Ω)
200
Max. Current
at 30
minutes
(mA)
0.042
T
mm
(inch)
5.0
(0.197)
FM0V104ZF
FM0V104ZFTP ( )
3.5
0.10
0.13
100
0.090
5.0
(0.197)
FM0V224ZF
FM0V224ZFTP ( )
3.5
0.22
0.30
100
0.20
6.5
(0.256)
Note:
To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.)
Weight
g
(oz)
1.3
(0.046)
1.3
(0.046)
1.6
(0.056)
●
FME Type ( Backup Large Current , mA Order )
Part Number
Ammo pack
FME0H223ZF FME0H223ZFTP ( )
Max.
Nominal Capacitance
Operating
Voltage Charge System Discharge System
(VDC)
(F)
(F)
5.5
0.022
0.028
Max. ESR
(at 1 kHz)
(Ω)
40
Max. Current
at 30
minutes
(mA)
0.033
T
mm
(inch)
5.0
(0.197)
FME0H473ZF FME0H473ZFTP ( )
5.5
0.047
0.06
20
0.071
5.0
(0.197)
Note:
To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.)
Weight
g
(oz)
1.3
(0.046)
1.3
(0.046)
●
FMR Type ( Max. Operating Temperature 85˚C type )
Part Number
Ammo pack
FMR0H473ZF FMR0H473ZFTP ( )
Max.
Nominal Capacitance
Operating
Voltage
Charge System Discharge System
(VDC)
(F)
(F)
5.5
0.047
0.062
Max. ESR
(at 1 kHz)
(Ω)
200
Max. Current
at 30
minutes
(mA)
0.071
Voltage
Holding
Characteristic
Min.(V)
4.2
T
mm
(inch)
6.5
Weight
g
(oz)
1.6
Note:
To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.)
●
6.5V Type
Part Number
Ammo pack
FM0J473ZF
FM0J473ZFTP ( )
Max.
Nominal Capacitance
Operating
Voltage Charge System Discharge System
(VDC)
(F)
(F)
6.5
0.047
0.062
Max. ESR
(at 1 kHz)
(Ω)
200
Max. Current
at 30
minutes
(mA)
0.085
T
mm
(inch)
6.5
Weight
g
(oz)
1.6
Note:
To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.)
18 Super Capacitors Vol.07
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2007.08.03 P0862SUCA16VOL07E
Specifications: FM Series 5.5V Type
Item
Operating Temperature Range
Maximum Operating Voltage
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minutes value)
–25°C to +70˚C
5.5 VDC
Refer to standard ratings
+80%, –20%
Refer to standard ratings
Refer to standard ratings
Capacitance
Equivalent series resistance
Current (30-minute value)
Surge Voltage
Appearance
No obvious abnormality.
More than 90% of initial requirement
Not to exceed 120% of initial requirement
Not to exceed 120% of initial requirement
Specifications
Test Conditions
Conforming to JIS C 5102
-1994
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge Voltage:
6.3 V
Temperature:
70
±
2˚C
Charge:
30 sec.
Discharge:
9 min. 30 sec.
Number of cycles 1000 cycles.
Series resistance:
0.01F: 1500
Ω
0.22F: 56
Ω
0.022 F: 560
Ω
0.047 F: 300
Ω
0.10 F:
150
Ω
Discharge resistance: 0
Ω
Conforms to 7.12
Phase 1: +25
±
2°C
Phase 2: –25
±
2°C
Phase 4: +25
±
2°C
Phase 5: +70
±
2°C
Phase 6: +25
±
2°C
Phase 2
Capacitance
Equivalent series resistance
Capacitance
Equivalent series resistance
Current (30-minute value)
Capacitance
50% or higher of initial value
4 or less times initial value
200% or below of initial value
Satisfy initial standard value
1.5 CV (mA) or below
Within
±20%
of initial value
Satisfy initial standard value
Satisfy initial standard value
Temperature
Variation of
Characteristics
Phase 5
Phase 6
Equivalent series resistance
Current (30-minute value)
Lead Strengh (Tensile)
No loosening nor permanent damage of the leads
Capacitance
Vibration Resistance
Equivalent series resistance
Current (30-minute value)
Appearance
Satisfy initial standard value
No obvious abnormality
Conforms to 8.1.2 (1)
1 kg 10sec.
Conforms to 8.2.3
Frequency
: 10 to 55 Hz
Test duration : 6 hours
Conforms to 8.4
Solder temperature: 245
±
5°C
Dipping duration:
5
±
0.5 sec.
Dipped up to 1.6 mm from the lower end
of the capacitor.
Conforms to 8.5
Solder temperature: 260
±
10°C
Dipping duration:
10
±
1 sec.
Dipped up to 1.6 mm from the lower end
of the capacitor.
Conforms to 9.3
Temperature condition:
–25°C
→
normal temperature
→
+70°C
→
normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature:
40
±
2°C
Solderability
3/4 or more of the pin surface should be covered with new solder
Capacitance
Soldering Heat Resistance
Equivalent series resistance
Current (30-minute value)
Appearance
Capacitance
Temperature Cycle
Equivalent series resistance
Current (30-minute value)
Appearance
Capacitance
Humidity Resistance
Equivalent series resistance
Current (30-minute value)
Appearance
Capacitance
High Temperature Load
Equivalent series resistance
Current (30-minute value)
Appearance
Voltage Holding
Characteristics
(Self Discharge )
Voltage between terminal leads higher than 4.2 V
No obvious abnormality
Within 20% of initial value
1.2 or less times initial standard value
1.2 or less times initial standard value
No obuious abnormality
Within 30% of initial value
Twice or less times initial standard value
Twice or less times initial standard value
No obvious abnormality
Satisfy initial standard value
No obvious abnormality
Satisfy initial standard value
Relative humidity: 90 to 95% RH
Test duration:
240
±
8 hours
Conforms to 9.10
Temperature:
70
±
2°C
Voltage applied: 5.5 Vdc
Series protection resistance: 0
Ω
Test duration:
1000
+48
hours
0
Charging
condition
Voltage applied: 5.0 VDC
Series resistance: 0
Ω
Charging time: 24hours
Time:
24hours
Temperature:Lower than 25°C
Humidity:Lower than 70%RH
Super Capacitors Vol.07 19
Storage
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2007.08.03 P0862SUCA16VOL07E
Specifications: FM Series 3.5V Type
Item
Operating Temperature Range
Maximum Operating Voltage
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minutes value)
–25°C to +70˚C
3.5 VDC
Refer to standard ratings
+80%, –20%
Refer to standard ratings
Refer to standard ratings
Capacitance
Equivalent series resistance
Current (30-minute value)
Surge Voltage
Appearance
No obvious abnormality
More than 90% of initial requirement
Not to exceed 120% of initial requirement
Not to exceed 120% of initial requirement
Specifications
Test Conditions
Conforming to JIS C 5102
-1994
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge voltage:
4.0 V
Temperature:
70
±
2°C
Charge:
30 sec.
Discharge:
9 min. 30 sec.
Number of cycles 1000 cycles.
Series resistance:
0.047 F: 300
Ω
0.10 F: 150
Ω
0.22 F: 56
Ω
Discharge resistance: 0
Ω
Conforms to 7.12
Phase 1: +25
±
2°C
Phase 2: –25
±
2°C
Phase 4: +25
±
2°C
Phase 5: +70
±
2°C
Phase 6: +25
±
2°C
Phase 2
Capacitance
Equivalent series resistance
Capacitance
Equivalent series resistance
Current (30-minute value)
Capacitance
50% or higher of initial value
4 or less times initial value
200% or below of initial value
Satisfy initial standard value
1.5 CV (mA) or below
Within
±20%
of initial value
Satisfy initial standard value
Satisfy initial standard value
Temperature
Variation of
Characteristics
Phase 5
Phase 6
Equivalent series resistance
Current (30-minute value)
Lead Strengh (Tensile)
No loosening nor permanent damage of the leads
Capacitance
Conforms to 8.1.2 (1)
1 kg 10 sec
Conforms to 8.2.3
Frequency:
10 to 55 Hz
Test duration: 6 hours
Vibration Resistance
Equivalent series resistance
Current (30-minute value)
Appearance
Satisfy initial standard value
No considerable abnormality
Solderability
3/4 or more of the pin surface should be covered with new solder
Conforms to 8.4
Solder temperature: 245
±
5°C
Dipping duration:
5
±
0.5 sec.
Dipped up to 1.6 mm from for the lower
end of the capacitor.
Conforms to 8.5
Solder temperature: 260
±
10°C
Dipping duration:
10
±
1 sec.
Dipped up to 1.6 mm from for the lower
end of the capacitor.
Conforms to 9.3
Temperature condition:
–25°C
→
normal temperature
→
+70°C
→
normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40
±
2°C
Relative humidity: 90 to 95% RH
Test duration:
240
±
8 hours
Conforms to 9.10
Temperature:
70
±
2°C
Voltage applied: 3.5 Vdc
Series protection resistance: 0
Ω
Test duration:
1000
+48
hours
0
Capacitance
Soldering Heat Resistance
Equivalent series resistance
Current (30-minute value)
Appearance
Capacitance
Temperature Cycle
Equivalent series resistance
Current (30-minute value)
Appearance
Capacitance
Humidity Resistance
Equivalent series resistance
Current (30-minute value)
Appearance
Capacitance
High Temperature Load
Equivalent series resistance
Current (30-minute value)
Appearance
No obvious abnormality
Within
±20%
of initial value
1.2 or less times initial standard value
1.2 or less times initial standard value
No obvious abnormality
Within 30% of initial value
Twice or less times initial standard value
Twice or less times initial standard value
No obvious abnormality
Satisfy initial standard value
No obvious abnormality
Satisfy initial standard value
20 Super Capacitors Vol.07
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
