Heat Shrink Tubings
HS100 Series
Features:
•
•
•
•
•
•
Semi-rigid, adhesive lined, polyolefin tubing
3:1 shrink ratio
Splash-resistant, moisture-resistant covering
Rugged protection against abrasion, vibration and flexing
Excellent strain relief and insulation of weak points
Operation temperature range : -55°C to 125°C
Dimension Table
Size
(Inches)
1/8
3/16
1/4
3/8
1/2
3/4
Inside Diameter
As Supplied
3.2 ±0.4
4.8 ±0.4
6.4 ±0.4
9.5 ±0.4
12.7 ±0.8
19.1 ±0.1
Maximum After
Recovery
1
1.6
2.2
3.2
4.2
6.3
Recovered Wall Thickness
Total Wall After
Heating
0.95
1.1
1.2
1.4
1.5
2
Meltable Wall After
Heating
0.35
0.5
0.6
0.65
0.75
0.9
Dimensions : Millimetres
Product Properties
Property (Units)
Physical
Tensile Strength (psi)
Elongation (%)
Cold Impact (-55°C)
Heat Shock (250°C, 4 hrs)
Secant Modulus (psi)
Longitudinal Change (%)
Electrical
Dielectric Strength (Volts / mm)
Volume Resistivity (Ω-cm)
Chemical
Corrosion
Water Absorption (%)
Fluid Resistance (23°C, 24 hrs)
Flammability
www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
Test Method
Requirement
ASTM D638
ASTM D638
ASTM D746
AMS-DTL-23053
ASTM D882
AMS-DTL-23053
1,500 min.
300 min.
no cracking
no cracking
25,000 max.
±5
ASTM D876
ASTM D876
1,500 min.
1 × 10
14
UL224
ASTM D570
-
UL224
no corrosion
2 max.
Good
Pass
Page <1>
05/04/12 V1.1
Heat Shrink Tubings
HS100 Series
Part Number Table
Description
Heat Shrink, 3:1, 3.2 mm, BLK, 10 m
Heat Shrink, 3:1, 4.8 mm, BLK, 10 m
Heat Shrink, 3:1, 6.4 mm, BLK, 10 m
Heat Shrink, 3:1, 7.9 mm, BLK, 10 m
Heat Shrink, 3:1, 9.5 mm, BLK, 10 m
Heat Shrink, 3:1, 12.7 mm, BLK, 10 m
Heat Shrink, 3:1, 15 mm, BLK, 10 m
Heat Shrink, 3:1, 19.1 mm, BLK, 10 m
Part Number
HS114
HS115
HS116
HS117
HS118
HS119
HS120
HS121
Important Notice :
This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Pro-POWER is the registered trademark of the Group. © Premier Farnell plc 2012.
www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
Page <2>
05/04/12 V1.1
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
