Scotchlok
™
Terminals
MNG24BC thru MNG10BC
Butt Connector, Nylon Insulated with
Insulation Grip
L
Data Sheet
Product
Number
MNG24BC*
MNG18BC
MNG14BC
MNG10BC
Wire
Range
(AWG)
26-24
22-18
16-14
12-10
L
0.88
1.00
1.00
1.15
Thickness
0.020
0.030
0.030
0.040
Barrel
Length
0.12
0.25
0.25
0.25
Barrel
I.D.
0.030
0.070
0.090
0.135
Maximum
Insulation
Diameter
0.093
0.145
0.170
0.250
* Not UL Listed or CSA Certified
Installation Information
WARNING
UNDERWRITERS
LABORATORIES
STANDARD NO. UL 486C
3M FILE NO. E23438
CANADIAN STANDARDS
ASSOCIATION
STANDARD NO. 22.2
NO. 0, 65
3M FILE NO. LR22190
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.
UL Listed and CSA Certified for use on stranded copper
(AWG) wire only.
Strip away the end 3/8 inch of wire insulation.
Specifications
Wire Size:
Barrel Seam:
Maximum Voltage Rating:
Maximum Operating Temp:
Maximum Current:
Insulator Material:
Terminal Material:
Insulation Grip Material:
Terminal Plating:
See Table Above
Butted with Insulation
Grip
600 V Building Wire
1000 V Signs or
Fixtures (Luminaires)
221˚F (105˚C)
Same as Wire
Nylon
ETP Copper
Brass
Tin
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style) or
TR-482, TR-490 (ratchet style) hand tools.
Barrel Crimp (Electrical)
Insulation Grip Crimp
(Mechanical)
Engineering Specification
Crimp-type terminals shall, electrically and mechanically,
connect permanently to the pre-stripped end of two
stranded copper wires.
The connector line shall offer barrel variations in wire
(AWG) size (26-24*, 22-18, 16-14, 12-10) and
construction (non-insulated brazed seam, vinyl insulated
butted seam, nylon insulated seamless, etc...). The
connector line shall have regulatory agency coverage (UL
Listing, CSA Certification). The connectors shall be
marked with the wire range and manufacturer’s symbol
( ).
The nylon insulated with insulation grip butt connector
shall be tin-plated, annealed copper, having a double-
length, round barrel with a center stop and tin plated brass
insulation grips at each end: all covered by a close fitting
nylon tubing, color coded and sized for a specified
(AWG) wire range (26-24*, 22-18, 16-14, 12-10).
Insulated connectors shall be UL Listed for 600 volts
maximum, building wire: 1000 volts maximum, signs or
fixtures and temperature rated 221˚F (105˚C) maximum.
* Not UL Listed or CSA Certified
3M and Scotchlok are trademarks of 3M.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture as of the date of
purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
Litho in USA.
© 3M 2002 78-8125-9662-1-A
模拟与混合信号
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
