DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
µ
PC8001
IF AMPLIFIER IC
WITH ON-CHIP MIXER FOR DIGITAL CELLULAR PHONES
The
µ
PC8001 is a 3-volt IF amplifier IC with an on-chip mixer developed for digital cellular phones.
The
µ
PC8001 consists of a high-sensitivity limiter amplifier with an input frequency of 455 kHz, a high-speed
and high-precision linear RSSI (received signal strength indicator ), and a second mixer with an input frequency
of 80 to 150 MHz.
The
µ
PC8001 features a low 3 mA (TYP.) and 2.2
µ
A (TYP.) current consumption at normal operation and
power-OFF, respectively. Its high-speed charge/discharge circuit enables fast power-ON/OFF switching.
The
µ
PC8001 boasts an extremely small size packaged in a 14-pin plastic shrink SOP, and low external
capacitances of less than 0.01
µ
F, in addition to an on-chip RSSI output resistor, and is most suitable for
high-density mounting.
FEATURES
• Low-voltage operation…3 V
±10%
• Low power consumption…(V
CC
= 3 V)
Mixer
During operation
At power-OFF
2.1 mA (TYP.)
0
µ
A (TYP.)
IF amp. + RSSI
0.95 mA (TYP.)
2.2
µ
A (TYP.)
• High limiting sensitivity…–91 dBm (TYP.)
• High-precision RSSI linearity…±0.5 dB (TYP.) (V
IF IN
= –86 to –6 dBm)
• High-speed RSSI response time
RSSI output rise time
RSSI output fall time
77
µ
s (TYP.)
113
µ
s (TYP.)
• High-speed power-ON/OFF switching time
Rise time at power-ON
Fall time at power-OFF
174
µ
s (TYP.)
3
µ
s (TYP.)
• External capacitors of less than 0.01
µ
F
• On-chip RSSI output resistor (34 kΩ)
• Ultra-compact package…14-pin plastic shrink SOP
The information in this document is subject to change without notice.
Document No. IC-3426
(O.D.No. IC-8949)
Date Published February 1995 P
Printed in Japan
The mark
5
shows revised points.
©
©
1994, 1995
1992
µ
PC8001
ORDERING INFORMATION
Part number
Package
14-pin plastic shrink SOP (225 mil)
14-pin plastic shrink SOP (225 mil)
µ
PC8001GR
µ
PC8001GR-E1
Embossed carrier taping (Pin 1 located toward tape unwind
direction)
14-pin plastic shrink SOP (225 mil)
µ
PC8001GR-E2
Embossed carrier taping (Pin 1 located toward tape wind
direction)
2
µ
PC8001
CONTENTS
1. PIN CONFIGURATION AND PIN FUNCTIONS ............................................................................... 5
2. I/O EQUIVALENT CIRCUIT ............................................................................................................... 7
3. ELECTRICAL SPECIFICATIONS ........................................................................................................ 8
4. CHARACTERISTIC CURVES ........................................................................................................... 14
5. TEST CIRCUIT EXAMPLE ............................................................................................................... 18
6. PACKAGE DRAWINGS .................................................................................................................... 19
7. RECOMMENDED SOLDERING CONDITIONS ............................................................................ 20
4
µ
PC8001
1.
(1)
•
PIN CONFIGURATION AND PIN FUNCTIONS
PIN CONFIGURATION (Top View)
14-pin plastic shrink SOP (225 mil)
IF OUT
PD
RSSI OUT
FIL3
V
CC2
IF IN
FIL1
1
2
3
4
5
6
7
14
13
12
11
10
9
8
MIX IN1
MIX IN2
V
CC1
OSC IN
GND
MIX OUT
FIL2
µ
PC8001GR
FIL1-FIL3
GND
IF IN
IF OUT
MIX OUT
OSC IN
PD
RSSI OUT
V
CC1
, V
CC2
: Filter
: Ground
: Intermediate Frequency Input
: Intermediate Frequency Output
: Mixer Output
: Oscillator Input
: Power Down
: Received Signal Strength Indicator Output
: Power Supply
MIX IN1, MIX IN2 : Mixer Input
5
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
