Technical Data Sheet
Revision Date: 11.11.10 Rev 4
5 Minute
®
Epoxy
ORDERING INFORMATION
Stock No.
14251
14210
14201
14270
14272
Description
Package Size
25ml Dev-tube
70g Twin-tube
500g Tub
50ml Cartridge
400ml Cartridge
A rapid-curing, general-purpose adhesive / encapsulant. It forms a hard, rigid bond or
coating in minutes
100% reactive, no solvents
Good dielectric strength
Good solvent resistance
Cures fast for quick metal to metal bonding and repairs
Pots and encapsulates electronic components and assemblies
Suitable for bonding metals, fabrics, ceramics, glass, wood and concrete (in
combinations)
Features
Intended Use
PRODUCT DATA
Physical
Properties
(Uncured)
Colour
Mixed Viscosity
Mixed Ratio by Volume & Weight
Working time 28 grams @ 23˚C
Fixture time
Functional cure @ 23˚C
Full Cure
Mixed Density
7 days cured at 24˚C
Adhesive tensile shear ASTM D1002
T Peel
Service temperature, dry
Tensile Elongation
Specific Volume
% solids by volume
Cured hardness, ASTM D2240
Dielectric strength, ASTM D149
Light Amber
10,000cps
1:1
3 - 6 minutes
10-15 minutes
45 - 60 minutes
12 hours
1.10 gm/cc
Performance
characteristics
(cured)
13 MPa
4-5 N/10mm
-40 - 93˚C
1%
3
909 cm /kg
100
85D
19.6 KV/mm
Poor
Excellent
Poor
Fair
Poor
Poor
Excellent
Poor
Chemical
Resistance
7 days room temperature cure (30 days immersion)
Acetic (dilute)10%
Poor
Acetone
Ammonia
Poor
Corn Oil
Cutting oil
Excellent
Ethanol
Petrol (unleaded)
Excellent
Glycols/Antifreeze
Hydrochloric 10%
Poor
Isopropanol
Kerosene
Excellent
MEK
Mineral Spirits
Excellent
Motor Oil
Sodium Hydroxide
Poor
Sulphuric 10%
10%
Please contact ITW Devcon for other chemicals
Unit 3, Shipton Way, Express Business Park, Northampton Road, Rushden,
NN10 6GL, UK
ITW Devcon Industrial Products, Liebigstraße 21, 24145 KIEL,
Deutschland/Germany
Technical Data Sheet
Revision Date: 11.11.10 Rev 4
5 Minute
®
Epoxy
APPLICATION INFORMATION
Surface
Preparation
5 Minute Epoxy works best on clean surfaces. Surfaces should be free of heavy deposits of
grease, oil, dirt or other contaminants, or cleaned with industrial cleaning equipment such as
vapour phase degreasers or hot aqueous baths. Abrading or roughing the surfaces of
metals will increase the microscopic bond area significantly and optimise the bond strength.
This product is available in cartridge, non-cartridge and 28g Devtube form.
Cartridge Form: The cartridge should be used with the appropriate manual Applicator Gun
and Static Mixer Nozzle. The Static Mixer Nozzle enables the epoxy to be dispensed,
metered and directly applied to the surfaces to be bonded.
Please note: Once the product cures in the nozzle it has to be thrown away and a new
nozzle used.
Non-Cartridge Form: Proper homogenous mixing of the two epoxy components of resin and
hardener are essential for the curing and development of stated strengths. Always mix the
two components with clean tools, preferably of a disposable design.
For small amounts use Devcon's 28g Devtube, which comes with it’s own plunger to extrude
the two components at an equal rate.
Apply mixed epoxy directly to one surface in an even film or as a bead. Assemble with the
mating part within the recommended working time. Obtain firm contact between the parts to
minimize any gap and ensure good contact of the epoxy with the mating part. A small
amount of epoxy should flow out the edges to show there is adequate gap filling. For very
large gaps, apply epoxy to both surfaces and spread to cover the entire area, or make a
bead pattern, which will allow flow throughout the joint.
Let bonded assemblies stand for the recommended functional cure time before handling.
They are capable of withstanding processing forces at this point, but should not be dropped,
shock loaded or heavily loaded.
Devcon Epoxy Adhesives should be stored in a cool, dry place when not used for a long
period of time. A shelf life of 3 years from date of manufacture can be expected when stored
at room temperature 22ºC in their original containers.
For complete safety and handling information please refer to the appropriate Materials Safety
Data Sheets prior to using this product.
Devcon will replace any material found to be defective. Because the storage, handling and
application of this material is beyond our control we can accept no liability for the results
obtained.
All information on this data sheet is based on laboratory testing and is not intended for
design purposes. ITW Devcon makes no representations or warranties of any kind
concerning this data.
For product information visit
www.devconeurope.com
alternatively for technical assistance
please call +44 (0) 870 458 7388 (UK) or +49 431 718830 (Germany)
Mixing
Application
Storage
Shelf Life
Precaution
Warranty
Disclaimer
Unit 3, Shipton Way, Express Business Park, Northampton Road, Rushden,
NN10 6GL, UK
ITW Devcon Industrial Products, Liebigstraße 21, 24145 KIEL,
Deutschland/Germany
PCB设计
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
