DC/DC Converters
THP 3 Series, 3 Watt
CB
Features
◆
Supplementary and reinforced insulation
◆
I/O isolation 3000 VACrms rated for
300 Vrms working voltage
Scheme
UL 60950-1
UL 60601-1
◆
Medical safety to UL 60601-1 and
IEC/EN 60601-1 3rd Edition, 2 x MOOP
◆
Industrial safety to IEC/EN/UL 60950-1
◆
9-40 VDC, 18-80 VDC and 36-160 VDC
◆
Extended operating temperature range
–40°C to 85°C max.
◆
Input filter meets EN55022A without
ext. components
◆
◆
◆
◆
Continuous short circuit protection
High reliability, MTBF >1 Mio. hours
Lead free design, RoHS compliant
3-year product warranty
The THP-3 series is a new range of high performance 3W DC/DC converters in
a low profile DIL-24 package with standard industry pin-out. The very high I/O-
isolation system of these converters and input voltages up to 160 VDC make this
product the best choice for many demanding applications in railroad and transpor-
tation systems, medical equipment, instrumentation, everywhere where high basic-,
supplementary- or reinforced insulation is requested to meet specific safety stan-
dards. A high efficiency allows safe operation in a temperature range of –40°C to
+75°C at full load. Full SMD-design with exclusive use of ceramic capacitors ensure
a very high reliability and a long product lifetime.
Models
Order code
THP 3-2411
THP 3-2412
THP 3-2422
THP 3-2423
THP 3-4811
THP 3-4812
THP 3-4822
THP 3-4823
THP 3-7211
THP 3-7212
THP 3-7222
THP 3-7223
36 – 160 VDC
(72 VDC nominal)
18 – 80 VDC
(48 VDC nominal)
9 – 40 VDC
(24 VDC nominal)
Input voltage range
Output voltage
5 VDC
12 VDC
±12 VDC
±15 VDC
5 VDC
12 VDC
±12 VDC
±15 VDC
5 VDC
12 VDC
±12 VDC
±15 VDC
Output current max.
600 mA
250 mA
±125 mA
±100 mA
600 mA
250 mA
±125 mA
±100 mA
600 mA
250 mA
±125 mA
±100 mA
Efficiency typ.
78 %
83 %
83 %
83 %
78 %
83 %
83 %
83 %
78 %
83 %
83 %
83 %
http://www.tracopower.com
Page 1 of 3
DC/DC Converters
THP 3 Series
Input Specifications
Input current at no load / full load
24 Vin models:
20 mA typ. / 160 mA typ.
48 Vin models:
10 mA typ. / 100 mA typ.
72 Vin models:
5 mA typ. / 85 mA typ.
24 Vin models:
9 VDC / 8.5 VDC
48 Vin models:
17 VDC / 16 VDC
72 Vin models:
34 VDC / 32 VDC
24 Vin models:
1.0 A
48 Vin models:
0.6 A
72 Vin models:
0.3 A
24 Vin models:
50 V max.
48 Vin models:
100 V max.
72 Vin models:
180 V max.
0.3 A max.
EN 55022 class A, FCC part 15, class A
3 Watt
Start-up voltage / under voltage shut down
Recommended external input fuse
(slow blow)
Surge voltage
(1 sec. max.)
Reverse voltage protection
Input filter
Output Specifications
Voltage set accuracy
Voltage balance
(dual output models)
Regulation
Minimum load
– Input variation Vin min. to Vin max.
– Load variation 25 – 100 %:
±1 %
2 % max.
0.5 % max.
1.0 % max.
15 % of rated max. output current.
(Operation at lower load is safe but major
deviations to specifyed data may occur)
5 VDC models:
75 mVpk-pk typ.
other models:
100 mVpk-pk typ.
±0.02 %/K typ.
>120 % Iout max.
25 mS max.
indefinite (automatic recovery)
5 VDC models:
1000 µF max.
12 VDC models:
470 µF max.
Dual output models:
220 µF max.
(each output)
6000 Vpk
3000 VACrms, rated for 300 Vrms working
voltage, 2 x MOOP
2 µA
7 pF typ.
>1000 Mohm
IEC/EN 60950-1, UL 60950-1
CSA C22.2 No. 60950-1-03
IEC/EN 60601-1 3rd edition, 2 x MOOP,
UL 60601-1, CSA C22.2 No. 601.1
– CB test report according IEC 60950-1
– CB test report according IEC 60601-1
– CSA certificate according UL 60950-1/60601-1
www.tracopower.com/products/thp3-cb60950.pdf
www.tracopower.com/products/thp3-cb60601.pdf
www.tracopower.com/products/thp3-csa.pdf
Ripple and noise
(20 MHz Bandwidth)
Temperature coefficient
Current limitation
Startup rise time 0 % to 100 % Vout
Short circuit protection
Capacitive load
Isolation / Safety
I/O isolation test voltage
(flash tested 1 sec.)
I/O isolation voltage
(50Hz, 60sec.)
Leakage current
(at 240VAC, 60Hz)
I/O isolation capacitance
(at 100KHz, 1V)
I/O isolation resistance
(at 500VDC)
Safety standards
Safety approvals
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 3
DC/DC Converters
THP 3 Series
General Specifications
Temperature ranges
– Operating
– Casing
– Storage
–40°C to +85°C
+95°C max.
–40°C to +125°C
3.3 %/K above +70°C
95 % rel H max.
>1 Mio. h
150 kHz typ.
(puls width modulation)
non conductive plastic
(UL 94V-0-rated)
Silicon TSE 3331
(UL 94V-0-rated)
16.2 g
(0.57 oz)
max. 265°C / 10 sec.
up to 5‘000 m (16‘400 ft) approved
– Reach
– RoHS
www.tracopower.com/products/thp3-reach.pdf
RoHS directive 2011/65/EU
3 Watt
Derating
Humidity
(non condensing)
Reliability, calculated MTBF
(MIL-HDBK-217F, at +25°C ground benign)
Switching frequency
Casing material
Potting material
Weight
Soldering temperature
Altitude during operation
Environmental compliance
Application note:
www.tracopower.com/products/thp3-application.pdf
- The component is not be used in an oxygen rich environment.
- The component is not to be used in conjunction with flammable anaesthetics and agents.
- The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment).
- A modification of the component is not allowed.
Outline Dimensions
31.8
(1.25)
Pin-Out
(0.008)
(0.41)
Pin
1
11
(0.15)
Single
+Vin (Vcc)
No pin
–Vout
+Vout
No pin
–Vin (GND)
–Vin (GND)
Dual
+Vin (Vcc)
Common
No pin
–Vout
+Vout
–Vin (GND)
–Vin (GND)
0.2
3.9
10.5
12
13
15
23
24
2.54
(0.1)
20.32
(0.8)
2x2.54
(2x0.1)
2.0
(0.08)
2.54
1
11 12
(0.6)
(0.1)
(0.8)
15.2
24 23
15
13
Specifications can be changed any time without notice.
Rev. 10/12
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com
20.3
Bottom view
Dimensions in [mm], () = Inch
Pin diameter ø 0.6 ±0.05 (0.024 ±0.002)
Tolerances ±0.5 (±0.02)
Pin pich tolerances ±0.2 (±0.01)
Page 3 of 3
FPGA/CPLD
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
